Recently active
I am not 100% sure if the root cause is from the latest flexNET (11.19.0) that was installed earlier this year. Our license server daemon has been down intermittently and more so this week. Our IT team has escalated the ticket with PTC, just curious to know if anyone else is also facing this same issue. Thanks! Calvin
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.5.02. What is the problem?want to know whether there is any way to move cable location point throughToolkit API or programmatically3. Are you using a workaround? If yes, please describe it.No.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation. we want to know whether there is any way to move cable location point through.Toolkit API or programmatically5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Improve tool Efficiency!
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.5.02. What is the problem?We need to get or set the Cable location segment shape (Smooth or Straight) using toolkit3. Are you using a workaround? If yes, please describe it.Yes. We are getting location feature info and then changing the shape using Map key4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.we need to change the shape randomly using toolkit.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)More than 100+
I am using Creo Parametric Release 5.0 and Datecode5.0.5.0If both creo5.0 and creo9.0 installed, how do configure that when opening Creo models directly, models created by creo5.0 will be opened with creo5.0 and models created by creo9.0 will be opened with creo9.0?
1. What product and version are you running? 10.0.3.02. What is the problem? We save NC assemblies with the design model not shown. Running NC simulation with the design model not shown you can't run compare to verify the process with the original model. Once you start the simulation you can't show the design model after the fact. You have to start over. The problem is that on lengthy NC programs this can mean a lot of time and you may not always realize the design model isn't turned on. So at the end of the simulation you realize you can't run compare and have to start the process all over again. This can lead to a lot of wasted time. It would be nice if either we could toggle the design model after running simulation or if Creo would ask if we would like to show the design model when we start a simulation for purposes of running Compare.
Hi, I have an Extrude Feature where the Value "Depth" is driven by a parameter (here: Test). This works, anything ok. But how is it possible to remove this Parameter there? - Right mouse button "Delete" is greyed out" and the Paramter itself is also not deletable in the Parameter Manger. I just want to enter a value again in "Depth" not this parameter.
I am trying to update a drawing (Creo 9.0.4.0) and I cannot get @O to work. Did they remove this from the program? Trying to reattach.
We just upgraded to Creo 10.0.2.0Here is a new problem I have which I can duplicate by any action involving trying to drag a Creo window or even a dialogue window within the main Creo window such as a "Measure Summary" box.In this example, I made a measurement on the part. The "Measure Summary" box appears covering up the smaller measurement box, so naturally I want to drag "Measure Summary" to the side to reveal the smaller measurement box which it is blocking.The moment I click and hold on the Measure Summary Box to move it out of the way, the Creo Window jumps half off the screen. I let go of the mouse button and it returns to normal. (Video Attached)How do I fix this behavior when I go to drag a window?Thank you,Glenn(view in My Videos)
Check-in comments in Creo Parametric through Toolkit.
Please include detailed documentation such as screenshots, images or video.When Installing multiple versions of Modeling / Drafting / ModelManager, there is usually a preferred version, where the file type associations should point to.On installing a version, all file types are registered for this version and have therefore to be registered for the preferred version again.On uninstalling a version, all file type associations are removed and have therefore to be registered for the preferred version again.1. What product and version are you running?20.3.4.0, 20.4.4.0, 20.5.3.02. What is the problem?File type associations have always to be registered for the preferred version again.3. Are you using a workaround? If yes, please describe it.Registering file type associations multiple times.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We always install a new version on all PCs in the company an
I need help. I have several files I need to export as either .stl or .3mf for printing. Just for reference, I am trying to use Creatbot Creatware software for slicing for a D600 Pro. I cannot get the slicing function to work in Creo either, this is another problem. I've checked every setting I can find which was suggested to check/change. My cord dimension is defaulted to Zero. I get several Error messages. When trying to save as stl, this shows...Unable to triangulate part. I've run the geometry check, there are a couple of caution messages..."Non manifold geometry may have been createdAnalyze hilited edges and redefine the feature". I have no idea what this means, nor how to fix it. Another issue I'm having is with the slicer. I have some models which I did export as .stl, but did have a problem in slicer, other files I cannot export as .stl and have the same messages in slicer as those that I did export.It doesn't m
I am using Creo Parametric Release 7.0 and Datecode7.0.10.0In sketcher we Can't edit the dimension. For example after selecting the dimension it is automatically un-selecting itself. The same issue is happening at 3 of our PC's. Requesting to make a swift action to resolve the issue asap.
I am studding pipe design from a "sample_project",There is a configuration file named "piping_mcat_dir.csv", point the location of the fitting 3D model folder.These locations are in local,I want change These locations to Windchill server folders.Do you know how to modify it?
I am trying to make a tire and cannot find what is wrong with my sketch. Also, it does not suggest anything. I have used the revolve tool before but I am very inexperienced with the program. I am also doing this without any sketch, so measures could be wrong.
Once I open a Solidworks part and make changes, when I save it there is a .creo extension added. How do I cut this off? I do not see it in data exchange.
I have been trying to install Creo 7.0 for a while, but keep getting a loading icon that disappears after a few seconds.I have tried running as administrator, disabling firewalls and antiviruses, and deleting all previous licenses and things off my computer (all at the same time). Does anyone have any insight?
Applicable Releases: Creo Parametric 1.0 to 8.0 Description: In this video, we will be using Expert Moldbase Extension (EMX) to: Calculate the overall size of the model Get the bounding box of the model Get the model size as X, Y & Z coordinates
I am looking for the command line utility or any other command line functionality to be used for converting the Creo family table generic part or instance to be converted to step file. I am not looking for the UI method as I am aware how to convert to Step using the Creo_viewer or adaptor. Is there any way we can run the Creo viewer in backend using command line ? I am searching on this topic since few days but no more info available. I really appreciate the expert guidance or opinion on this. I am using Creo parametric 7.0 or 9.0 and 10. let me know if we have any feasible solution 🙂 Thanks.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 82. What is the problem?Current cabling workflow does not have a straight forward way to add a service loop to a routed cable in a 3D model or allow the cable to be looped/routed back on itself, this requires manual addition of offset locations and is very time consuming3. Are you using a workaround? If yes, please describe it.Yes, we create a network going through the cable management features in the assembly, then route the cable through the network, then add in offset locations until the service loop appears as designed, in places where we need the cable to be dressed by manufacturing we again create a looped section in the network and then route the cable through this loop and create offset locations to give the appearance of a dressed extra length of cable.4. What is the use case for your organization? Describe how your idea would work in context or how it wo
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.5.02. What is the problem?Interference tool is not working for cabling parts.3. Are you using a workaround? If yes, please describe it.No.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We would like to check the interference between two cables using toolkit5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Improve efficiency
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.5.0 Windchill 12.1.2.12. What is the problem?Unable to checkin the model using Toolkit or any other supportive API since no API provided by PTC to add checkin comments which is mandatory.3. Are you using a workaround? If yes, please describe it.No4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We are using Toolkit API to automate the product design and model creation. Once all the models created, It is need to checkin in to windchill for seamless model creation, model check execution and to reduce lead time where we are struggling because api not available to checkin.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)The power of Product Automation Software reduces, and designers are wasting t
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 82. What is the problem?In assembly drawings where components have both Find Numbers and Reference Designators, the values are driven by separate repeat regions on the same view. There is no way to merge/stack the BOM Balloons. We also use a component parameter to define the torque value for fasteners, it would be nice to be able to autoballoon a view and merge the torque balloon to the find number balloon vs the drafters having to manually place torque annotations on views.3. Are you using a workaround? If yes, please describe it.manual annotation creation4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.drawing view annotation automation5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)assembly d
I have a case open at PTC showing inconsistent assembly handling of component mass. See article CS396826. The problem occurs for a component with no solid geometry and an assigned mass of some value and with 0 for the assigned volume. I have attached models.7z with a sample assembly (asmtest.asm) with 2 components: assigned-mass.prt model with no solid geom and an assigned mass of 5.0 real-mass.prt model with actual geom and mass calculated the "normal" way These models have been created with Creo Parametric 6.0 You will need to set config.pro option mass_property_calculate automatic If this is the only component in the asm then it's assigned mass is not used by the asm. Screenshot (Creo Parametric 10.0.1.0) showing the asm mass of 0 when real-mass.prt is suppressed and note the asm has 0.0 even though assigned-mass.prt is showing 5.0. After resuming the real-mass.prt the asm mass now correctly has 7.2664 which is including the mass of the assigned-mass
Hi. I'm using Creo 7.0.10 and I cannot find a way to change the line properties of a projected cosmetic sketch. I can change the properties of the lines within the cosmetic sketch feature itself (color and line type) but when I project the feature onto the surface, the projected lines are created with the default color and type. (orange, solid). See snapshot. I am trying to create a simple sewing pattern onto overlapped fabric, hence the dashed lines. I can do this with projected datum curves, but our (enormous) company Windchill is set up to always hide all layers for official Check In. Our system will also not allow us to create additional layers so I have that potential alternative working against me as well and there is 0 chance of changing that. Cosmetic Sketch gets me around my curve/layer limitations, but now I am faced with this new dilemma. Is there a way to change the projected feature properties or is this just how Creo works?
Hi,I have currently CREO 9.0.0.0 Student Edition installed. When I start the application, a popup message tells me that a new version 9.x.x.x is available. But when I click on the update link, an other message tells me that I cannot update as I don't have a customer number. Does it mean that the Student Edition cannot be updated ?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.