Recently active
When creating drawings, the line thickness should be shown.For example:Visible edges thickDimensions thin In addition, the Invisible Lines should be displayed as dashed lines and not as solid lines in a different color as is currently the case.
Customers are in Mold industry and usually have a repeated requirement of creating specific sized hole features. However, when simple holes are created customer is unable to call the counter bore, counter sick and depth parameters in the drawing hole table. Customer has to manually define feature level relations to create required cbore dia, csink dia and hole depth parameters that get the values from respective feature dimensions. Customer states that this is causing extra work and delays in detailing process. Currently we have below few limitations in the hole Table and request for enhancing the same Hole Table has to be created for specific hole types separately with Hole label with Unique Alpha numeric or numeric scheme with Auto leader from the hole center origin. We have this capabilities in UG-NX . I have attached the sample drawing for reference and understanding the requirements. Hole labels are not created from the hole origin automatically wi
It is not possible to define Creo view render mode at startup with a preference (see CS75525). Please make that possible as this is also possible in Creo Parametric and very helpful not to have to switch setting manually after retrieving a model.
We want a possiblility to hide the datum tags of axis in Creo View. Creo Parametric does have this feature (display_axis_tags NO) and we also need this feature in Creo View. CS163655 SPR-Details-2889623/2214569
It would be convenient to be able to have the option "up to next" or "up to selected" when defining the thread depth on a standard hole as in some cases the hole is tapped through all the way. There is only a Thru Thread option (when hole drill depth is set to Through All) and Variable at this stage.Alternatively, having a tickbox that will allow the thread to stretch the same depth as the drilled hole would also work.
When an hole is modelled on an assembly and goes through more parts, it is not possible to select a length thread as "Through all".It is not a big issue, the support center told me that it exists a workaround since 2001, but long time is passed, a lot of people waste their time and I think it is time to solve this problem.
In the real production, there are many case to use TAP-DRILL after use STRAIGHT-DRILL. We would like to create this geometry and Hole-Note by one Hole feature. Currently Taper hole can only use taper drill.
Please allow "Medium Fit" to be available for use with other standard hole types. Currently it is only available for ISO holes. UNC Holes ISO Holes Adding this will require populating the medium fit values in the .hol files. Once this is working, please allow "Medium Fit" to be configurable as the default fit when placing new holes. (See existing idea for that.)
Remove or disable the code that changes the zoom / orientation / pan, for example after changing cross-section or regenerating. The model should stay where I last put it, not disappear off the edge of the screen.
Datum Feature Symbols created in the model can not be extended beyond the surface as shown below. They can only be moved within the boundary of the selected surface or attached to a dimension, gtol, etc. This idea is to implement the ability to do so to be compliant with ASME Y14.5. I am aware that you can create set datums that allow you to do this, but they are not parametric with the model gtols. If you change a set datum name it does not update the datum name in any Gtols that carry the same name. Original discussion: https://community.ptc.com/t5/Detailing-MBD-MBE/Extending-Datum-Feature-Symbols-Beyond-Reference-Surface/m-p/560912
Make it possible for the scale model operation to become a feature. This allows us to easily modify the scale back and forth for something that needs to retain a history of it's original dimensions by having a feature in the model tree that modifies how much the model has been scaled.This wouldn't replace the existing scale model function but would just allow an option for it to become a feature.Example: a complex mold needs to have two representations: room temperature, and a thermally expanded version. With a scaled model feature we could make a family table that represents the two cases without having to create complex offsets that may fail, not become a true representation of the geometry if it has small features, or modify hundreds of dimensions.
I have often selected elements to start a command, and then mistakenly selected the wrong command (Move Face instead of Pull Face, or Align instead of Offset). I would like a function to select the "Last Selection" so that I don't have to manually select the same elements again. In the past when I have brought this up, there were some technical issues which made if difficult to do. To make it easier, I only want that list kept until a command has been completed (i.e. the model has changed). Once a command has been completed, the "Last Selection" list is cleared.
Currently the File > Open dialog box only searches by filename in both the File name field and the Search field.Please allow at least the search box to search on the Windchill Name and Number attributes. Better yet, combine both fields and allow them to search on any Creo parameter/Windchill attribute.
Running the ProModelcheckExecute() function in interactive mode up to and including Creo Parametric 4.0 causes the ModelCHECK results to be displayed in the embedded browser. If, for example, no errors and warnings were found, the ProWindowBrowserSizeSet() function gives you the option to close the browser window right away. Since Creo Parametric 5.0, however, the ModelCHECK results are no longer displayed in the browser but in a new, separate dialog window.And for this there is no function to close it if needed like before!
Please make an option where the end users who make spelling errors easier to be self corrected instead of us manually catching them during drawing release cycle. Creo Para 7 spell check can only run during Model CHECK. Why only at this time? When PTC said that CP7 will have spellcheck, we got excited thinking it would be passive like MS Word, but sadly it is not the case. Why can this not be added? I am submitting a request to PTC for spell check to work passively. Thank you for your support 🙂
There are times when we may need to work in our model and use sheetmetal features for our regular parts. Either we are designing a model and a sheetmetal feature would help get the right design intent, or we are working on an imported features and would like to manipulate, adjust or fix them using a sheetmetal feature. I understand that a non-sheetmetal body shouldn't merge into a sheetmetal body. However, we should allow a sheetmetal body to merge into a non-sheetmetal body. Below is an imported component that is a solid (non-sheetmetal body). If any of the flanges imported with an issue, one approach could be to recreate the flange with a flange tool. Here is just a random model I threw together showing a flange being used in a non-sheetmetal part. I've had better examples in the past, where we have wanted to use a sheetmetal feature in a non-sheetmetal part, but I can't recall what they were. Thanks @mneumueller
Hi in Annotation we need all the symbols described in the norm ISO 2553. For example the symbol for "stud welding". kind regards Urs Ammann German: wir benötigen in Annotation die aktuell gültigen Symbole aus der Norm ISO 2553. Dies speziell für das Bolzenschweissen. (wia auch alle anderen welche fehlen) Danke im voraus. Urs Ammann
When dimension lines overlap, it would be nice if the lines would automatically break to save a lot of manually breaking dimension lines. This seems like similar functionality to hatching breaking around text.
Creo Illustrate should have the option to Publish Separate Files directly to Windchill. When creating an Arbortext documentation, for example, these separate figures can be used as Windchill objects in the Structure but it is impossible to get these figures to Windchill without WGM and Workspace import functionality. Saving the illustration c3di-file to Windchill does contain the separate figures, but the figures can not be used independently in Windchill structures
Recently ptc added the 2D Pulish functionality. In the past I used the 2D option (SVG) in the 3D publish. Recently in a ptc case ptc suggested to me to migrate from 3D to 2D publish for various improvement (quality and performance). I tried it but I couldn't publish after the new setting, the button becomes grey and disabled. Then I open a case: C15818291 The support replied to me that this behavior is as designed: "A published c3di file is saved as PVZ file, an illustration can contain 2D, 3D figures, when you publish an illustation, you can export one or more of the figures in one or more of these formats, including 3D Creo View model, image and 2D illustration.But publishing c3di file as PVZ is only for 3D figures, if c3di file only contain 2D figures or you only need publish 2D figures, you do not need the function of Publish, File>Save Figure as has been able to meet our needs."Then this functionality at the moment is for me useless because I need svg files in pvz on publ
The thing I would find most valuable is for CREO Parametric to automatically calculate a part/assemblies outer dimensions (think a bounding box) during regeneration. Even having this as part of the analysis tab and saved as a feature of the model tree would be better than what we currently have. This data could be used in parameters and relations as needed. When making a BOM of materials needed being able to pull this information from the models and populate the BOM would be a massive time saver. This function exists in most other CAD software and others inside my organization cannot believe CREO will not calculate this efficiently.
(view in My Videos) This video demonstrates how text in a dimension is flipped to the other side of the dimension in Creo 4.0. This is a manual, single dimension action that has to be repeated for each dimension this is required on. The ability to select multiple dimensions and flip the text would improve the ease and speed when this is required in a drawing with many dimensions. In early versions we could select right before the text and drag it to the other side. This would be a great enhancement to the Flip Text option.
Instead of having to manipulate P values in hole charts, it would be great if IFX incorporated a dropdown menu where the thread series is located so that the user could choose between several charts that all share the same Basic Diam and Thread (i.e. UNC vs. UNJC and -2A vs -3A)
Redifine the 0 of ordinate dimensions
Document CS100751 supports the problem that the measurment dialog box works differently than all other boxes and dosen't close with the middle mouse button. I find that this deviation from the standard work-flow to be quite frustrating since it adds unecessary time and mouse motion.My suggestion is to add an "OK" or "Close" command/button that is automatically active in the measurment dialog that will close it when clicked. This will allow the middle mouse button to behave as expected.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.