Recently active
I am using Creo Parametric Release 9.0 and Datecode9.0.4.0I am attempting to open files from the 1990s that are labeled as DRW and I cannot open them.Here are the errors that I faced'Filename' Cannot Be Pulled
I have a part model that is solid geometry. When exporting the part using STEP it generates the file but the STEP file does not contain any geometry when imported. The part does not have any geometry checks and has absolute accuracy (1E-4 inches) set in Creo 7.07. The geometry is not what I would call complex. I have been able to get around this issue by saving the part as a Creo neutral file, opening it as a part and then exporting it as STEP. This process yields accurate geometry in the STEP export. The source part file will not export to STL either but there is no diagnostic info on bad geometry. Typically this would identify are where tessellation failed. Has anyone else encountered this issue?
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.5.02. What is the problem?Creo Illustartion APi required3. Are you using a workaround? If yes, please describe it.NO4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Need to automate the Creo illustration5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.5.02. What is the problem?Annotation mismatch between Creo and Creo view files3. Are you using a workaround? If yes, please describe it.No4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Automation required5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Taking more time to check
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.502. What is the problem?We want to know how to fit model in graphic window automatically (not same as fit option) after regeneration so that window should occupy max space in graphical window in Creo Parametric through Toolkit.3. Are you using a workaround? If yes, please describe it.No4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Need to automate the model fit5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Taking more time to do it manually
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.82. What is the problem?Use Direction option not available for Cable routing Toolkit.3. Are you using a workaround? If yes, please describe it.yes, right we are using CSYS as a reference for routing.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.In a cable routing we are trying to do automatic cable routing using some use direction concept. what we are doing in manually. In Creo toolkit we don't have option or API to use this concept right now5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)100+ Users and also 8hrs per day/
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.502. What is the problem?3D Symbols size and location altering when changing the orientation to named view.3. Are you using a workaround? If yes, please describe it.No4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Need to automate the 3d symbols placement and cleanup5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Not able to automate the process
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9..5.02. What is the problem?We want to know whether it is possible to print All or Range of Combined States or any API available to simulate Creo UI steps: File > Print > Print > "All" or "Range" from Combined States while printing solid model in Creo Parametric through Toolkit.3. Are you using a workaround? If yes, please describe it.No
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.82. What is the problem?Unable select the individual segments in Cable segment3. Are you using a workaround? If yes, please describe it.No4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.In vestas we are doing Cable automation. We need to select the individual segment and we are trying to move. 5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)we are unable to select and also unable to move the individual segment
Hi, guys. I'm working on the surface using the table pattern function in Creo Parametric 10.0.0.0 and an error occurred in this process.Excel fetched the location, length of the feature, and thickness data to extract and patterned, but some features encountered problems and the extrude did not proceed. After proceeding with the other random data again, I confirmed that the extrude was completed without any problems. Can I get any help with this?I attached the Creo file, Excel data, and config.pro file into .zip file. The size of the blocks is 51.5625 x 51.5625 x 4 in the order of x, y, and z [All length units are mm] Among the green parts of the image, except for the outer edge, the part that appears inside is the part where the error occurred.Sheet1 data was used in the Excel file, and it means the length of the feature from column A to the location where the extraction operation starts, the x-axis, y-axis distance, and the thickness to proceed with the extraction opera
1. Is there any way to clean up the MBD 3D annotations(Dimensions) in 3D model in the same way like a 'Dimension cleanup' command in Drawing/Detailing?Also, Looking for any equivalent API(toolkit) or an algorithm that can be used to automate it?2. Is there any snap line option in MBD as like in drawing/detailing in creo to do manually?If so, is there any config option in Creo like(~auto_center_dimension_mbd) to set in 3D model for MBD dimensions?We would be glad if you could provide as much as info on this or / any of the workaround that we can tried on this 3D dimension cleanup activity.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.5.0 2. What is the problem?Is it possible to create copy geometry feature in toolkit api3. Are you using a workaround? If yes, please describe it.Using UDF4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.we need to optimize the code concepts5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)100+
I have an assembly with a few sub-assemblies. Each of those subassemblies are set to be of specific rep in the main assembly (some are at Master, some are "User specified") When working with the main assembly, when I right-click on one of those subassemblies in the model tree, and click on the pop-up menu "Open" - it brings a little window with the available reps, and I have to choose the rep that I want to open that sub-assembly in. I am hoping to find a way to open the _current_ rep by default. That is, if (from a model tree) I click "Open" on a subassembly which is set to be Master - that subassembly opens in its own window at Master rep. If I open another subassembly from a model tree of a custom rep "No Fasteners" then Creo loads that sub-assy activating the "No Fasteners" rep. There is remotely similar setting "open_simplified_rep_by_default" but it does a different thing. I am looking for something like "open_assembly_tree_component_in_current_rep". I
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 10.12. What is the problem?Some users would like to customize background colors in the model tree for the selected objects. Now the color is this (selecting direcly in the model tree):And this when the selection is made on 3d:Many colors are customizable...is not clear why these 2 not.3. Are you using a workaround? If yes, please describe it.No workaround availables.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We are using Creo View in our Production Warehouse, where the visibility is not perfect, monitors are of low quality, we need more contrast in color to highligh selected parts.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)10 users, production users.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 10.1.0.02. What is the problem?DIN 2769 uses the sphere diameter of the smallest circumscribed sphere to define tolerances. There is no way to measure this sphere in Creo View.3. Are you using a workaround? If yes, please describe it.No4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We use DIN 2769 as a default to specify general tolerances. There needs to be a way for our designers to measure the smallest circumscribed sphere to select the appropriate tolerance class for the parts.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Number of users: ~ 300General tolerances of parts not set correctly: rework, part cost, possibly customer complaints.Non-compliance with a national stand
Hi, My goal is to clearly have the presence of external references in the part visible by having "Dependency status" column in the model tree. This way if i create an external reference in the part, this column would have "Dependent" written on it. However, I noticed that if I create a new simplified rep in the part, then it automatically shows as "Dependent" in the "Dependency status" column. What is even more interesting - when I activate the Master rep, the "Dependent" status goes away; when I activate my new rep again - the "Dependent" comes back. As per this article here: https://www.ptc.com/en/support/article/CS67430 , the "Dependency" is always external. This makes me think that this may be not intended software behaviour, because I am creating a rep within the same part, and not initiating any external dependency. Could somebody please comment on why this is happening, and potentially how to create a custom rep in a part without having
Hi everyone, I have an issue regarding "plot_drw_to_pdf.ttd" in CREO Distributed Batch.Can someone please tell my the correct syntax for "STROKE NON TRUETYPE FONTS" in the TTD file?The default value for Font is:<font enum="PRO_PDF_USE_TRUETYPE_FONTS"/> I've tried various configurations like:<font enum="PRO_PDF_STROKE_NON_TRUETYPE_FONTS"/>or<font enum="PRO_PDF_STROKE_NON-TRUETYPE_FONTS"/>or<font enum="PRO_PDF_STROKE_NONTRUETYPE_FONTS"/>or<font enum="PRO_PDF_STROKE_NON_TTF"/> nothing worked.
As per the original post. I am having a similar issue trying to install PROEStudent wildfire 3.0. The DAT file sent to me is not recognized by the install program as a license file.
So we upgraded from Creo 7 to 10. When we did, this annoying thing started occurring where this information window would pop up upon every regen. After a couple of days, it stopped doing it. But today it started doing it again randomly. I've tried turning off all notifications and changed the notification behavior to "Do Not Show", but it still pops up. Having to click the X icon every time I regen the CAD model is GREATLY reducing my ability to work... I don't mind having the little banner show errors and dissolving after a little on it's own, but having to acknowledge every pop-up during design is obnoxious and pretty much makes the CAD software unusable...
1. What product and version are you running?Creo92. What is the problem?SSO is not working as "well" as it was with previous versions of Creo, we were using windows_browser_type ie_browser.Users are regularly asked to enter mail adresse + password + double authentification !!!3. Are you using a workaround? If yes, please describe it.No work around now that Chromium is the only browser allowed in Creo94. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We use SSO for all applications, only Creo9 regularly asks for credentials 5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Time lost for many Creo9 launching
Every time I open the model, the view changes back to "Shaded" even though I have "Shaded with Edges" selected as the default. I'm running Creo 10.
I am using Creo8.0 trying to run a thermal simulation on a simple block with a convection condition applied to the bottom. For the full simulation, I am planning on starting at 20C (also initial temp as defined in transient analysis), ramping up to 90C, then down to -35C. I keep noticing an initial dip in the temperature at the measure point at the bottom of the block for the first few minutes, which should not be there as I am trying to increase the temp from 20C to 90C, so it should not be getting colder at all during that ramp. I was originally using 90C as the bulk temperature in the convection condition, with the table ramping up from .22 (20C) to 1 (90C). I decided to run some tests where I hold at 20C using various bulk temperatures and table value combinations to better understand the table function tool, but I am still lost. Using a bulk temp of 90C and 6 table rows with values of 0.22, I am still seeing the temperature dip significantly (Test1). Using a bulk temp of 1C and ta
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Currently creo 7.0.10, soon creo 9.0.8.2. What is the problem?Motion envelope functionality delivers a quick faceted surface as a result. When created, it consists only of geometry and the datums included in its startpart.It would be great to enable creo to copy datum features (mostly axes, datum planes) from relevant, contributing parts into the motion envelope. They will be useful to place a motion envelope- model into a different assembly. This action should be done directly in "CREATE MOTION ENVELOPE"-UI.3. Are you using a workaround? If yes, please describe it.It is possible to use e.g. like copy geom, but this would take longer than select datums during creation.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.-Time saving (1. while creation,...2. while assembling into anoth
Hello Multibody community! Welcome to this new post on the multibody capabilities that we introduced with Creo 7.0.Meanwhile, the first maintenance release Creo 7.0.1 had been released and it does contain several refinements/enhancements to the initial set of capabilities. Here a list of those enhancements: Boolean OperationsIn Creo 7.0, the “Keep bodies” option in Boolean Merge, Subtract and Intersect features was only available during feature creation. Now it is also enabled during feature Edit-Definition workflows Curve feature You can now select a body (in addition to the previously available object types Quilt and Surface) when checking the “Place curve on surface” option. Data ExchangeThe “Import multiple bodies into one part” option is now available in File/Open (Unite) and ATB-enabled Import workflows Improved Body HandlingImproved body handling when a feature-owned body (e.g. a body created by split-body, import or data sharing features) gets deleted from the mod
I've been working with motion envelopes a lot over the last several years. This is an incredibly useful tool and my organization creates and uses them frequently. However, they're difficult to create, difficult to use, and difficult to update. It's time PTC gave this tool an overhaul with the end-users in mind. Ribbon toolbarReplace the pop-up dialogue box with a ribbon based menu.Separate this from the Playback tool.This is where I should be able to select mirror planes, body options, frame of reference options, output options, etc.More envelope output optionsOption to export a separate mirror part instead of, or in addition to, the regular envelope part.Option to add a mirrored envelope to the same body as the regular envelope or add it to a separate body.An ability to select the mirror plane.Option to export and assemble the envelope to the mechanism assembly it came from.Option to update an existing envelope if it was associated to the mechanism model in this
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.