Recently active
I would be glad if the angle measuring could be improved. I have a hard time always when I need to use the Adjacent + or -.Either I choose the wrong option + / - or I select the elements in the wrong order. I'm probably too stupid In other CAD you can select the elements in any sequence and when you move the cursor arround the corner the system shows a graphical feedback of the result. This is a clear and simple action and does not require a large reflection. Another option/feature.Click the intersection point, the direction of the dimension helpline, 2.Element and place the dimension. Examples come from DraftSight
Colors are used for multiple purposes: real product color, functionality (high and low pressure, machined and unmachined, …)There is no functionality available which allows to use multiple color schemas for a model. Idea:Add a tab to the ViewManager "Color" like the "Style" tab. Include the "Color" to the "All" tab.Let the user toggle betwen the schemas and define the colors for a model per schema.
Add ability to export Creo Parametric part and assembly files to Additive Manufacturing File Format (AMF), an XML-based format designed to support additive manufacturing processes like 3D printing.In addition to the model geometry, an AMF file can contain information about the color and materials of objects for 3D printing
Add the ability to specify a tools shank diameter during cutting tool setup. This diameter would begin at the end of the flute length and continue the remainder of the tools length untill it reaches the holder.
Currently when you add an assembly view all of the piece part gtol and geometric datums from the parts shown up on the assembly drawing. I have never seen a use case where piece part gtols were needed at the assembly level.
In Creo Parametric 2.0, when select surface as measure reference, whole surface are highlighted and fully non-transparent color, it impacts to review the objects below the big surface. Please display selected surface for measure reference just as surface edge highlighted and surface in transparent color as the same as Pro/ENGINEER Widfire and Creo Elements/Pro 5.0 behavior.
When file version of last saved is higher than current used, we cannot open this file and it just returns warning message"cannot retrieve", but we don't know the file version of last saved. Please provide a way for us to identify file version of last saved in Window explorer and File Open dialog in Creo Parametric
In old Pro/Desktop the second icon for viev modes was "Transparent" - after activation all model/assembly shows as transparent - easy and simple! This functionality was very helpful and because no need to change any material properties it was very fast!
Create center lines, hole axes including proper display for radial holes
Warning message for save, for example, "your model has not been saved for 20 minutes"
Inheritance feature can have 3 options of dependency: Automatic update / Manual Update or No DependencyIf you choose No Dependency, in the model tree you have a specific icon for the feature.It should be nice to have also different icons for Automatic update / Manual Update.It's important to know that you have a feature in your part that can be modify automatically or not.
Get rid of as many scrollbars as possible in the interface, in menu such as extrude depth, show all options at once. Having to scroll and search through the Hidden options is annoying and time consuming. There is plenty of screen space, please just list them all without the scoll bars. Also there is plenty of screen space to the right that is being WASTED, why not move more of the interface over there so we don't have to click on so many tabs that hide the controls we need to use?
There are Manikin Lite, EFX Lite, CAE Lite, Spark Analysis Lite and CAM Lite in Creo 3.0 referring to https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS130029. Please provide Mold design Lite and EMX Lite in Creo 4.0 too.For example I just need to use the "Model Outline(size)" and SmartHolechart simple functionality, but don't want to buy EMX, so free EMX Lite is required
It would be great to directly have acces to the function material removal cut from the right button on the step like playpath or material removal simulation
Often in an assembly the display of datum display tags clutter the screen. It seems to be an oversight that you cannot toggle their display off just as you can for datum planes, axii, points etc. It would be nice to be able to see the product you are designing and not just datum plane and their tags. These tags are not controlled by layers, current work method is to manually edit each datum's properties [3+ for many components], and if you do this then you ruin their use as reference datums in drawings. These datums only need to be displayed for a fraction of the life of a part file.
With current functionality, it is not possible to specify a simplified rep of a model when you begin a new drawing WITH A TEMPLATE. It is possible to do this when you start a new drawing empty or with a format.Please add the functionality to start a new drawing with a template using a model with a specific simplified rep (not the master rep).See below discussion for clarification:http://communities.ptc.com/message/253939#253939
It should be possible to create a 2D drawing from a 3D lightweight model or assembly in Creo Elements/Direct Modeling. this would provide a quick way to load a very large assembly, lightweight, and then create a 2d drawing of it. sure you can use mangage parts to reduce the level of detail in your drawing, but you still need to load the entire model. Better would be if you could load the lightweight, and produce a low level detail 2d drawing of it.
I'm doing configuration management on Creo in a rather large group of users. Recently, the practice of overriding dimension values have caused a considerable amount of costly problems.Users copy old assemblies or parts that are in production, change the features that will differ on the new part, and then trust all the other dimensions that are already in use as if they are all parametric.PTC has suggested a workaround of creating associative dimensions using show model annotations. (document – CS61225)Unfortunately this is not a good solution as it only inhibits the user from using the function on that type of dimension.The override can still be used, and there is no way of preventing the user from doing so.I want to suggest that PTC makes two config options in order to address this. - -The first config will be to highlight or display non-parametric, dimensions. ( in order for detection of non-parametric dimmensions)- &nb
Keep the order of the Views defined at template level in first positions of saved orientations in part and assembly mode.Today if the user creates a view named 1,01,2,3,4....the order of the standard template orientations change and these standard views will not be directly visible in the Named Views window.Same request for the other view manager items: Explode, Simp rep., Style.Thanks.
Currently there are two settings for the spin center. "On" and "Off". With the spin center "On", your model will always spin from this fixed point. If you are zoomed in causing this fixed point to be outside of the viewing area, your model goes shooting off the screen. With the spin center "Off", your model will spin from a piece of geometry or a point on a surface that is close to the position of your mouse when starting to spin. The problem with this is that the geometry tends to be something far in the background, again causing your model to go shooting off the screen. If you are in a large assembly with a lot off geometry it makes the problem that much worse. Spinning in a manufacturing file with tool path displayed is also very difficult because a piece of tool path may be selected as the spin center, which again, causes your model to go shooting off the screen.I would like an option added to spin from the center of the viewing area. There
Add an option to display "All Around" symbol on dimensions or notes.
Currently drawing formats need to be replaced one by one. Multiple sheets can be selected so they all appear in the setup window, but each sheet still needs to be selected one by one for the format to be changed.Add an option to be able to select multiple sheets and "Replace All".
I have a customer with big models with a lot of parts, and Model manager go out fo memory. I already set the java memory value to maximum (about 1610Mb, with bigger value Model Manager doesn't start) but it is not enough. So, I think is time to make a 64bit version. Are there any plans about it?
When placing a UDF (User Defined Feature) you must manually move to the next required reference in the pop up window. This causes you to move your mouse back and forth from selecting the reference on your model back to the pop up to select the next requirement. This is not only a time killer but forces you to take your eyes off of your work.Modify the functionality so once a reference is selected on your model and the requirement is fulfilled, the pop up automatically advances to the next reference required. Or make it so clicking the right mouse button will advance to the next requirement.This could potentially work on features other than UDF's.
It would be EXTREMELY helpful to allow the ability to change which simplified rep displays for a part drawing view. Many times I've made a drawing with the master rep and later realized I needed to create a rep that eliminates some features for that drawing. Given that most of our drawings have a minimum of 30 dimensions, and typically twice that, along with multiple detail views, it would be great to be able to change which rep displays for a view so I won't have to re-do the entire drawing or use a family table.Thanks for your consideration and for providing this forum for such requests.Best regards,Don Gilbreath
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.