Recently active
Highlight all type of features when passing over them in model tree.Datum planes and CSO do not highlight in Creo2.0 Video Link : 4022
Develop a GUI built into Creo for the development of gear teeth using existing spline data from a drawing or machinist handbook.
Currently, if a company is using 3D annotations to define models without a drawing, the annotations have to be re-created in each model; there is no way to export annotations and import them into another model.PTC please add the functionality to export, store, and import 3D annotations.
Dealing with skeletons alot in large assemblies, I find myself running up and down the Model Tree quite often.Having a little dragger at the bottom of the window that you could click and drag up to seperate the window into two panes that scroll independently would be nice.Just a thought.
Its not just in assembly mode, but I've picked this as an example, in several places through the Creo2 UI you end up with such a limited number of characteres that you can't see the end of names, which are often the key identifiers, really annoying, all that screen space and they put a tiny little non expandable box for the names.As ever, why? It must have been developed by someone who just called their test parts A, B and C, sadly in the real world 18 characters often isn't enough for the part name and reference name.
Currently for my company, I cannot find a way to meet all use cases for how we utilize the notes after the Leader Orient or Tail as we call it, of the weld symbol if it is created through the Weld Application. Note that we have customized our symbol to remove the REFERENCE which comes OOTB and drives weld sequence numbers after the tail. We replaced it with 2X which is our most common use of the notes after the tail. Users can easily change it to 4X, 5X etc. to represent that number of similar welds. This works great for us in 90% of our use cases. The problem is when we have a use case that needs either 2 lines or 3 lines of notes after the tail. Example: I need this weld symbol to read as shown (Note that it was created as part of Weld Application tool):Redefine symbol as shown:Go back to symbol on drawing and there is no change. As I see it, these are my options with current functionality:Create annotation symbol in drawing and hide (Did not hide in picture) Weld Application d
As it is now, a new datum plane has an option for Adjust Outline that has no center point. Only its corners can be moved. It would be useful to have a center point and also have that center point be at the center location of its creation by default. A scale option could scale the plane to the center point very quickly. Also, when a datum plane is created its outline is built on a size that cannot be preset. It would be helpful to have control of the default size. As it is they are quite large and usually must be resized.An example is - a datum plane is created normal to a curve and is located on a datum point that was created on the same curve. The center point of the planes Adjust Outline should be the datum point that it was built on, and an adjustment would scale it to that point by default. If it is wished to scale it to another location, or even only use the corners without scaling, then these should all be options.
Many of our customer want to work with more than one session on the same computer. They want to create toolpaths for machining while other open session is calculating any other toolpath. They also need to make step by step check for manufacturing with the same file names.
In manufacturing, when an nc sequence retract plane is below the surfaces to be machined, the toolpath will generate a gouge into the part without a warning or error. This can cause the cnc machine to crash into the part.
One mis-click can sometimes end up wasting a lot of time.I've had instances where I've misclicked and ended up wasting 30 minutes waiting fo a command I didn't mean to run finish.
The pre-visualization of the different merge results in non-shaded mode is not good / not clear enough.Today, we use the preview button at each “change side”.We need simple shaded result of the different possibilities of merge results We need clear visualization without surface selection. Video Link : 4101
In the Sketcher, the Lock constraint icon is visible only when the mouse cursor is over the locked entity
I have checked into this issue and found that, as per current functionality, it is not possible to add a new to row to an existing table with the default text style/ height. (You may refer to CS52055 for more information)It This is an intended functionality of Pro/ENGINEER that the default text height for a table will be registered with it at the time of its first creation. The text height that is set will be the drawing default text height available at the time of creation.If one drawing is created at REV A and changes are submitted and added to the dreving, then the drawing needs to be updated to REV B. To do this the drawing revision block needs to be updated. I do this by adding a new row to the revision table and put in the appropreaite revision information. However, for one reason or another, the new row added to the table has a didderent text size then the default for the revision block has on the drawing. So there are several ways to change this text hieght and I do just that.
I use a Laptop and an external Monitor (in the office). When using modeling and model manager, i often move windows to the external monitor. Unfortunately, when i restart my laptop without the external monitor (home/site), the Model Manager window(s) is no longer available as it is trying to dock to the now non-exisitant location on the external Monitor. There is a semi-workaround regarding the MM window - "Shift+RMC on the icon in the task bar -> Maximise" - will allow you to access the MM window, but unfortuanately this is not the case for the load window. My product reqeust is for MM to identify when hardware is started on single or multiple windows and to always be visible regardles off how the application was shut down.
Show Set Datums from the Base Model in the drawing for the model with the Inherited feature. Actually, set Datums can only be shown "In Dim".SPR created in 2001 ... https://www.ptc.com/appserver/cs/view/spr.jsp?n=920739
It would be very useful to systematically show the feature names of any feature when using any filter.Acually, the names of Quilt or Surface features are not shown when using Quilt or Geometry filters.Show names of quilts, surfaces in selection fields -> Pick From List, UDF fields, ...
We are unable to create features out of a sketch resulting from a pattern.To reproduce this issue, try the following:Create a Sketch in any partCreate a Pattern from that SketchTry to use one of the resulting sketches to create a feature (ex. Extrude, Copy...)PTC says it's a current functionality (C11068317).
Recommend a floating GENERAL Toolbar similar to the Quick Access Toolbar utilizing small icons only.The difference for this toolbar would be to include using any command regardless of applicability to the current session. If the current session cannot use a command in the toolbar, the icon is grayed out rather than removed. This toolbar would not require editing for each mode such as one configuration for assemblies and another for drawings.The fact that the toolbar remains "constant" would make picking commands much easier than the dynamic toolbars currently provided. In addition, the toolbar would be easier to manage as it would remain constant regardless of application.Personally, I could see an entire strip of small icons all the way across the screen anchored just above the message line(s).As a bonus; if the current tab is on "annotation" and you pick a "modeling" command on the GENERAL Toolbar, the ribbon would switch to the Modeling tab and open the command pic
It would be great if, in Model Check, we can create a layer with rules. Currently, Model Check create an empty layer or a layer with axes, datums, csys but it is impossible to create a layer with rules to put inside some axes and datums with specific attributes (names, ID...)
Add a menu item "Add Radius" (above Make Constant?) to the variable radius round right mouse button when clicking along the radius chain as shown below:
I can't believe we still can't mirror existing components in Pro/E yet. This seems like a really basic and essential function.Essentially what I am looking for is a mirror pattern, or a copy > paste special > mirror.PTC, please allow mirroring of components without creating a new model.ANSWER IS BELOW:http://communities.ptc.com/ideas/2954#comment-10450
When setting a datum plane to be a geometric target the plane is always shown in the model regardless of layer or feature settings. This is new functionality per CS59979 "https://www.ptc.com/appserver/cs/view/solution.jsp?n=CS59979&posno=1&q=59979&nav="https://www.ptc.com/appserver/cs/view/solution.jsp?n=CS59979&posno=1&q=59979&nav= This functionality is undesirable in many circumstances.Can we have a config.pro setting to toggle this?
Currently the pattern is previewed with black dots, that do not really give you an idea of the end result.Next to that, these black dots are not always previewed at the location where the regenerated pattern ends up, giving a wrong preview.The pattern preview should provide a proper suggestion for the real end result of the pattern.Ideally you would get a fully generated (attached) preview of the pattern represented by the actual shape of the pattern members.Like is done in Creo Elements Direct: http://youtu.be/B6IvCIk2MM0Of course the pattern must not regenerate slowly during edits. If this is inevitable, the the preview glasses option may provide the solution to regenerate the pattern only once.
Ability to place symbols for burring and undercut according to ISO13715 (JIS B0051)
Ability to activate assembly, part or cross section by clicking on the item on model tree
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.