Recently active
We are doing trivially simple analyses in Creo 9.0 Simulate (Not Simulate Live...) and we are consistently crashing the computers. (Problems taken from or similar to exercises in an SDC textbook.) See the attached for the specifications on these computers. I have some students that know a lot about using FEA and they are not having any more success with the classroom computers. What might I (the instructor) try, to stop these crashes? Do we need to upgrade our computers? I suspect this is true. However, are there things we could change/try on these computers that would help? (See the attached pictures, which I believe have sufficient information for people to comment.) https://prodart.pl/wp-content/uploads/2022/05/creo9_hardware_notes.pdf This link seems to say that Dell computers with AMD graphics are NOT approved? And it appears that these computers have AMD GPUs and are Dell computers.Any input I can get would be a
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Illustrate 10.1 & Creo View 10.12. What is the problem?Creo View 10.1 has strong markup capabilities and the ability to add other viewables to the session such as PDF's 3. Are you using a workaround? If yes, please describe it.We do not have a workaround. 4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We are implementing using Creo Illustrate for manufacturing work instructions but cannot fully explain the work properly with the current capabilities inside of Creo Illustrate. 5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)50+ users have been limited or hesitant to adopt Creo Illustrate since they cannot embed other documents into the platform such as industry/company standa
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 10.0.0.02. What is the problem?We need API functionality for our PLM system to provide simple Check In/Check Out functionality similar to how Illustrate checks into Windchill.3. Are you using a workaround? If yes, please describe it.The workaround requires saving then importing into our PLM system which is prone to user error.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.The check in would work the same way Creo Illustrate and Microsoft Office checks into Windchill.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)This currently impacts 10 Creo Illustrate users and easily causes 20 hours/week of missing files that have to be redone in Creo Illustrate because the files were not checked in and go
I am having trouble creating properly dimensioned drawings of compound miter cuts on HSS square tubes. The annotations are difficult for the shop to interpret. ( see picture attached) So the next best thing is a pipe wrap template that the shop can use to mark the tube for cutting.I've had some luck:1. converting to sheet metal and then making a flat pattern drawing and exporting to DXF for laser cutting a marking template and also2. some luck creating a surface wrap and unfoldng that as well. Neither one is ideal however, and both were found by accident and not easily repeatable. Furthermore the "convert to sheet metal" method was irreversible so it requires making copies of all the tubes in the model which is a royal pain when there are more than a few parts.
Hello, I am wondering if there is a method to use Distributed Batch to backup drawing files (and all associated assembly + part files) to a directory ? I attempted this using the mapkey.ttd and then including my config.pro containing a mapkey that recorded: Save a backup (while in a drawing file) > OK > Yes to the two prompts that appeared. The error I receive in the log is [-4] Error: Incomplete input data. The manual information suggests that this is due to required dependents not being retrieved, but I haven't been able to find a remedy for this (if any). The mapkey sequence itself is as shown, as runs as expected in Creo Parametric. mapkey bk @MAPKEY_NAMESave backup to working directory without prompt. For \mapkey(continued) use with distributed batch;@MAPKEY_LABELInstant save backup;\mapkey(continued) ~ Close `main_dlg_cur` `appl_casc`;~ Command `ProCmdModelBackup` ;\mapkey(continued) ~ Activate `file_saveas` `Current Dir`;~ Activate `file_saveas` `OK`;\m
[Original title: Creo Elements/Direct License Server20.6にてUserIDが正しく取得できません。] 1.どのような製品とバージョンを実行していますか?What product and version are you running?Creo Elements/Direct License Server20.6 2.問題はありますか?What is the problem?UserIDが14文字以上の場合、UserIDの尾が削られて正しく表示されません。例えば、添付ファイルにはUserID欄にkouta.hachimoと記載がありますが、正しいUserIDはkouta.bashimotoです。If the UserID is 14 characters or more, the tail of the UserID will be truncated and will not be displayed correctly.For example, the attached file has kouta.hachimo in the UserID field, but the correct UserID is kouta.bashimoto. 3. 回避策を使用していますか? 「はい」の場合は、それについて説明してください。Are you using a workaround? If yes, please describe it.いいえ、回避策はありません。No, there is no workaround. 4. あなたの組織のユースケースは何ですか? あなたのアイデアが中断の中でどのように機能するか、またはそれが 実際の状況にどのように適用されるかを説明してください。 What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation. 5. この問題は現在、あなたの組織にどのような影響を与えていますか? (影響を受けるユーザーの数、生産性の低下時間
Hi, we are looking to implement a custom fastener library using IFX in our department. It will require customisation of all fasteners, forming new file names and assigning custom parameters. On the positive side, I think I can find all of the required types of fasteners in default IFX library, which makes building a custom one much easier. I have tested it for a couple of weeks with building a couple of custom fasteners and it went almost flawless. Now the question is - what unforseen challenges may arrise during development and using it? As any other system, there is something always to learn which is difficult / impossible to forecast, but would be great to know before we spend effort developing the custom library and start building assemblies with them. Just to demonstrate my point - a reference example for issues with Solidworks Toolbox would be:- Solidworks doesn't always import the excel files correctly to build the configurations- Solidworks toolbox dat
IFX definition window allows to modify the countersunk diameters while using countersink head screw but UI we can find only counterbore , we need this countersink name enabled at the IFX UI level”
I m struggling to find a way to create a single draft entity line on a drawing sheet. Looking to create a line at 0,0 and go to 1,0 (x direction) or from 0,0 to 0,1 (y direction). Can someone point me in the right direction?
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Cro 9.0.7.02. What is the problem?Unable to export ecad context data from drawing when exporting a pdf file3. Are you using a workaround? If yes, please describe it. No using old school dxf data from Siemens Xpdedtion4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation. We would use this to better/faster and more arcuate PCB assembly drawings.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)We would not be taking advantage of the new capabilities within Creo 9 for ecad context data thus maintaining the current slow process. We could save 10 - 20 per drawing in time spent the current way.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders. General engineering. Senior design engineer.2. What version of Creo Parametric are you currently running?9.0.2.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Currently there is no way to show units in dual dimensions. Suffix can partially solve this problem but only on main dimension. Workaround is adding attaching note to dimension with units or just provide general note in drawing. Also different precision for primary and secondary units in options. 4. What is the use case for your organization? Making drawings with dual dimensioning.5. What business value would your suggestion represent for your organization? Shortens work time.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running? Creo Parametric 102. What is the problem? Counterintuitive Flat Patterns in DrawingsI have used Creo for years, learned 3D modeling on it 20 years ago, and was an active user for the next 10 years. Then switched jobs and have been away an equal number of years. In my newest job we are switching from Inventor to Creo, and I couldn't be happier about it. That said we have many new members who have never used Creo or only sporadically used it in the past. A colleague and I just spent the last 20 minutes trying to figure out the correct way to add a flat pattern to a drawing. We finally stumbled upon a helpful youtube video that went over the create flat pattern command, and then the create flat rep command. The flat rep command only does half the job, though. What is missing is that to actually differentiate the new flat pattern rep with the master rep is
I have a UDF that creates threaded internal holes. In the UDF family table exists all the information that is needed to create a note on the drawing for describing the thread, depth etc. Is there a way to create a note from the table columns without having the user select each dimension?Note should read as below: 1/4-20 UNF-2B Major Dia.: .5000 Pitch Dia.: .4565/.4500 Minor Dia.: .4340/.4170What I would like is an annotation to be created when the thread UDF is ran. The UDF may be ran several times on one part & this is the reason to need it created as the UDF is ran. This way the user can show/erase the annotations and reduce the chance of errors.
Hello community, I've started to add some custom light scenes in the lightsscenes.xmlHas anyone experienced this already?I mean there are some settings that are not fully explained in the help, for example the difference between "ambient_adjust" (in the main definition of the lightscene) and "adj_ambient" (in the definition of the light itself).Or other best practices in positions, orientations, etc..I'm not fully happy with the default that comes with the application so I'm doing some tests and wondering if anyone has already done something to be shared, at least some experience 😉 Thanks
Hi guys Good Morningis there any Api call is available for reading or retrieving the model from the windchill workspace?Please let me know if you know any other Possibilities. regardsAravind
Hello all, I am facing a problem related to the conversion of my files to the Creo Parametric 9 version. Currently, this version of Creo only allows you to change its results into the following formats: I want to convert my analysis results from these above formats to Excel format. I tried surfing online regarding the same but couldn't find it. If anyone can help me, then I request that person offer me that information to convert those results into readable text or Excel format.Thank you,Rushang
Hi,Does toolkit offer the possibility of developing a CAD model directly using programming language. Like all command like extrude and all can be programmed according to dimesional requirements without building any CAD model in actual.
I was wondering if anyone knows how to select the surfaces highlighted from a semantic query? For example, I want to be able to select all GTOL annotations in my model and put the surfaces related to them under a layer. By right-clicking the GTOL layer and selecting "select items", the surfaces I want all show up under semantic query, but they aren't actually selected for, say, changing the appearance. If anyone knows how to do this with or without the semantic query tool, your help would be much appreciated. Also, my company is removing licenses with the GD&T advisor, so something like that wouldn't be an option. Thanks! Version: Creo 11
CREO 8.0/5.0Inserted exploded view on sheet-11 of the parts is like transparent. Outlined, Like the tangent lines you can see all the way thru the part.The part in the assembly model is solid. Not toggled to transparent.The part is an imported part from McMaasterCarr. But we use hundreds of their models with no issues.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Illustrate 10.12. What is the problem?No search function for 2D/3D figures.(see also my question "Search function for 2D/3D figures in Creo Illustrate 10." in the forum).3. Are you using a workaround? If yes, please describe it.In the future we will store all our images (for operating instructions) in a database. All the images will only consits of a 11-digit number. Each image will be connected to a Creo Illustrate file. In the Creo Illustrate file all figures will have that same 11-digit numbers. The 3D figures like 12345678001, and the 2D figure like 12345678001_.So a big Creo Illustrate file will have e.g. 50 figures consitsting only of 11-digit numbers.So, to find an image (figure), the editor needs a serch function (not a filter function) to highlight the figure in the list of all figures.4. What is the use case for your organization? Describe how your idea
Hello, I've been trying to simulate one interesting case in which i did stuck. Here is an image of what i've been trying to achieveHere is an example of using advanced rigid link beam is discontinued after first rigid link is applied Here is an example of using advanced spring (point to suface(projection)). It is deforming in wrong direction Can you help me solve this mystery?
I tried wrapping OTK C++ to create a dialog. What I learned is that it is possible to manipulate the user interface of CREO when setting the style of the dialog to uifcDIALOG_STYLE_PARENT_AND_MENU_MODAL. At the same time, when you open the dialog interface of other creo, the dialog created by OTK will be closed. In general, there are no exceptions as follows the sample code. LIKE:uifcCreateDialog, uifcActivateDialog, uifcExitDialog and uifcDestroyDialog return 0 andno exception is thrown.But I get an exception when I call the function uifcActivateDialog in a function that is rewrapped. After the uifcActivateDialog dialog is blocked, an exception occurs when open other CREO dialog boxes.Thanks in advance. Versions:Creo Parametric 9.0 - 64 bitWindows 10 64 BitC++ Object Toolkit
Hello CAD admins, you probably also provide your users with a company-config.pro with standard mapkeys in the text directory of the Creo installation.In our case it happens again and again that users create their own mapkeys (which is legitimate), but when saving them they manage to write out the complete company-config.pro into the local one in the home or start directory.Since the local mapkeys have the sovereignty, the users do not get changes to the mapkeys in the company-config.pro anymore.As far as I know, the default mapkeys can't be packed into a config.sup either, because then the users can't create their own mapkeys anymore.How do you deal with the problem of overwritten default mapkeys? Regards, Domenic
Hello,Is there a search function for Creo Illustrate figures? In the future I will have large Creo Illustrate files with a lot of illustrations (20....100 and more), all consisting of 11-digit numbers. In order to find one of these numbers (illustrations), I urgently need a search function similar to the search function in the parts list. Unfortunately, at the moment (it seems) there is only a filter function for figures that isolates the figure I am looking for (see picture below): However, I would like to have the figure I am searching for highlighted in the list of all figures, so that I can see the location (see picture below): If I am wrong, please tell me how to search for figures. Best regardsRamon
Hi Guys,Can we use the model check to detect the ghost reference and break it, is it possible?Regards,Aj
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.