Recently active
I have a set of rollers that when I drag the assembly need to adjust the angle of the rollers. I can do it in one section of the tube, but not the whole length. How do I identify the mechanisms? I did best with a 3D contact. The parts are highlighted. Move the orange assembly, the magenta rollers adjust around the cyan tube and rollers stay on each side. This post was an admin edit and originally posted on August 11th 2023 8:27 AM
How to merge multiple STEP files generated for let say CAB assembly in Creo using code.
SO I'm making a project to calculate the surface areas of a sheet metal part that has a surface finish, two types "finish1" and "finish2", but I only have access to the free java object toolkit. I know I cannot use the surface finishes nor the annotations. I had an idea to attach a note of a specific type to a surface with a surface finish and then get the surface its attached to then get its area. Is this possible? I've tried GetAttachment() as it is a DetailNoteItem and doing GetParent which returns with the part which I think isn't helpful as i none of the model items from that are surfaces. Is there another way? //Surface Finishes private HashMap <String, Double> getFinishes(Solid solid){ double finish1 = 0; double finish2 = 0; HashMap <String, Double> finishes = new HashMap <String, Double>(); try { ModelItems modelItems = solid.ListItems(ModelItemType.ITEM_DTL_NOTE); for (int i = 0; i<modelItems.getarraysize
Hello Everybody, I want to update paramters before save. I am trying to use Session Action Listner, but ending up with crashpfcSession.SessionActionListener.OnBeforeModelSave Also implementation help on pfcSession.SessionActionListener.OnBeforeModelSaveNeed your help
Can anyone help me with this: In Creo 10 Illustrate, I want to move the anchor point to rotate. See a screenshot below; This contains a group of opbjects that should rotate not from the center point but from a another point so that the hinge effect is more visible. I may be overlooking something on how to move the anchor point in this version of Creo.
We want to use "ALT" parts (very much against my recommendations but we have to do BOM's to the specs...) and while it's easy enough to change the quantity to "ALT" or "AR" (for bulk items like sealant etc.), I'd like to actually manually change the index (EDIT: right column listed as "ITEM") to have 2 #11's. I'd also like to be able to keep the correct quantity for "ALT" parts since that's good information. I've been working on it and I don't THINK it's possible, but I'm not 100% sure it can't be done. Or if it CAN be done, can it be done without a gigantic set of relations at the table level? Any ideas? Thx!
In previous versions I had no problems opening Creo Parametric model files by dragging and dropping them into the graphics window from Windows File Explorer. Now this function to open files does not work at all, not for part models and not for dragging part models into an assembly. What changed in Creo Parametric 9.0 that this function will not work??
Hi All we have several UDF defined for our daily work.in general, they are all similar build, the first "feature" is a csys on which a cut out is placed.the csys was mandatory to make the feature (cut out) flexible. now we are facing a small problem with that. if we create a sketch with point, we are not able to place the udf on one point during creating a pattern. is there any possibility to do that? actually the question is, is it possible to place csys on a point? br
I am using Creo Parametric 6.0.3.0I have data file type .STP, the size about 1000 MB when I open by Creo Parametric, there are warning box show Creo is not responding. Do you have solution for open the large file or extract file(Assembly paty) to small size (sub part) ? Anyone who have experience about this issue, kindly guide me.
Hi We are going more and more into direction of MBD. But still we need the 2D Drawing. On thing we are searching for to improve our design/modelling process is, how can I apply in 3D modelling a saved orientation to a combination state such that any annotation appears according the saved orientation definition as soon as it is added to the combined state? So far, we need to select all the annotations from a combination state and apply the saved orientation to them. In addition, we are looking for settings, which forces creo to take-over the saved orientation if I apply the combination state in a 2D view. Does anybody have a solution or a hint for these questions? PB
I tried to use Creo 10 today, and got a license failure. I eventually found that I need to download a new license file from the license manager website, even though my hostid did not change (because PTC has upgraded my license to "10 and below" on the server side for me transparently). Got the new file and installed it. Then I found the following message in my license server:10:06:00 (ptc_d) Request denied: Client: XXX (11.19) newer than Vendor Daemon (11.17). (Version of vendor daemon is too old. (-83,21049)) The license manger installation doc is here: https://www.ptc.com/en/support/refdoc/creo_parametric/compatibility/ptc_lms_download It has links to all the various versions, be careful to get the one you need, don't get confused like I did. 😞
I has build a synchronouse java app,and rigisterd as a task named "task01".when I start a new asynchronous java app and StartJLinkApplication which build before, and run ExecuteTask "task01",creo crashed!!
jlinkAsync: I used pfcAsyncConnection.AsyncConnection_Start to start a app and get the connection. Console shows Port number is not provided.RemoteConnectionStarter finished and destroyed。When I use connection.AddActionListener ((AsyncActionListener)this) , throws exception:Exception in thread "main" java.lang.NoSuchMethodError: getCipTypeName..who can help this,thanks!
In Creo Parametric 8.0, in a Sheetmetal Part, the Mirrored Features collector is missing when editing a mirror feature. If I go to a part file, it is there. Can someone explain what I'm doing wrong or why it is this way? See attached PDF for screen captures. Thanks,New Creo User.
Good afternoon, the part axes and planes are hidden by default when added to an assembly, and I can't find a way to unhide them. Is there a setting in the configuration that could be the cause? I am using CREO Parametric 8.0.5.0. Thank you!
- Displays the name of the currently active model- If no model is active, a VBA error message is displayed- I don't know if the drawing name can be displayed? test it out ^_^Sub Model_Nanme() Dim asynconn As New pfcls.CCpfcAsyncConnection Dim conn As pfcls.IpfcAsyncConnection Dim session As pfcls.IpfcBaseSession Dim Model As pfcls.IpfcModel Set conn = asynconn.Connect("", "", ".", 5) Set session = conn.session Set Model = session.CurrentModel Call MsgBox(Model.Filename)'// Disconnect with Creoconn.Disconnect (2)'// CleanupSet asynconn = NothingSet conn = NothingSet session = NothingSet Model = NothingEnd Sub
This is a compound curve NO way to trace over it. I need to use it to extrude out form this face. How do i turn a referenced line from reference into solid creo can use? In inventor this is VERY simple you just click and turn it from reference to actual line. CREO can turn normal lines back and forth like this but it cant seem to to the same for a reference line??
*** "IpfcAssembly.AssembleByCopy" *** ask for useThis function copies existing parts in assembly and automatically assembles new copied parts.This is the code i made. there is an error'///////////////////////////////////////////////////////////////////////////////////////////////////////Dim Solid As IpfcSolidDim Assembly As IpfcAssemblyDim ComponentFeat As IpfcComponentFeatDim CreateModelDescriptor As New CCpfcModelDescriptorDim ModelDescriptor As IpfcModelDescriptor'// Load model from "rod_nut.prt" file into SessionSet ModelDescriptor = CreateModelDescriptor.CreateFromFileName("rod_nut.prt")Set Solid = session.RetrieveModel(ModelDescriptor)Set Assembly = modelSet ComponentFeat = Assembly.AssembleByCopy("C:\PTC\WORK90\JP100.PRT", Solid, True)'///////////////////////////////////////////////////////////////////////////////////////////////////////the code that gives the errorSet ComponentFeat = Assembly.AssembleByCopy("C:\PTC\WORK90\JP100.PRT", Solid, True)please correcte-mail : korealion
This SHOULD be very simple.It IS very simple in every other package I have used. I just want a dimension in a drawing to SNAP to the END of the line for line 1 and END of the line for line 2, not the middle, not any other random point it feels like choosing but the END of the line under my mouse.Simple right?I have tried putting in sketched lines to lock in a point for it to use but you cant dimension a sketched line while its near a model line???It is crazy this is not easier to do. I can snap lines to the points i am trying to dimension but i CANT dimension them????There is no way to move the attachment point after the dimension is created.There is no way to restrict the attachment point to END OF LINE as its being created. Yes i am frustrated, being forced to use CREO for Uni ... waste of time imo but here I am.
I am using Creo Parametric Release 4.0 and DatecodeM150Having strange issues with one client laptop running Creo Parametric 4.0 M150 with Windchill PDMLINK 12.0. The issues seems to be intermittent. I have tried everything even uninstall and reinstall but the issue continues on this one laptop?I ran the diagnostic tool referenced below. I'm scratching my head on this one PLUS no support from PTC as they stopped tech. support on Creo Parametric 4.0 2 years ago. Our upgrade to Creo 8, 9, or 10 is not scheduled until 2024, YIKES!Any insight would be very much appreciated!Cheers,KeithAdvance Instrustion set 8Manufacturer Dell Inc.Platform Type x86e_win64System Precision 3571Processor Manufacturer GenuineIntelCPU Number Of Cores 14Speed MHz 2400L2 Cache KB 4096RAM MB 32768.003GB Switch trueSWAP GB 4.75DISK Label C:Size GB 953.21Available GB 658.52FileSystem Type NTFSGraphics InformationName NVIDIA RTX A1000 Laptop GPUVendor NVIDIAVersion 31.0.15.2667Graphics InformationName Intel(R) UHD Gra
I'm using Creo 3 to create a drawing for an injection molded part. Some edges that have draft on them show as hidden lines when they should be solid. Arris line on the corner is displayed correctly as solid. Area where text and arrows in image below is open without any features. Anyone ever encounter this issue?
I am trying to automate the model generation of an assembly using Creo Programming (version 8.0.5.0). I am able to get to the point where I can read a file with all the inputs and generate the model. But after reading the file, I have to regenerate the model several times (almost 6 to 8 times) to completely get the final assembly. I want to automate the regeneration process as well. I am pretty new to Creo programming and I wanted to know if it is at all possible to write something in the code which can auto-regenerate the model for me and will give me the final assembly right after importing the file. Thanks for your time in advance.
HiHow would I go about in creating section C-C in Creo 9.0 I tried creating a zone and although that does give me the 3d view it does not give me an option to show the section lines.
I am using Creo Parametric Release 6.0 and Datecode6.0.6.0Our engineers have a query regarding creo, see below: We need some help on CREO piping module - clocking angles. At the minute, there is a discrepancy between the CAD and the measured angles on the machine. We want to understand, how CREO measures the angle between to the end coupling oriented in 2 different planes.
Hi all, I'm using Creo Parametric 9.0.0.0 (Student Edition). I've never had any issues with tthis program before but now, whenever I hover over a plane when creating a new part, assembly, etc., The whole program freezes up and stops responding for minutes at a time. Checking task manager, it was using no more resources than normal but still froze. I tried restarting my computer which didn't help. Has anyone else experienced this issue? Does anyone know any fixes? Thank you.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.