Recently active
Out of nowhere I am having an issue when trying to modify dimensions in the Sketcher. Typically, I was able to modify dimensions by double clicking and then making the change and moving to the next, but now I am unable to do that. When I double click the dimension will briefly highlight (like normal) then quickly closes before I can modify it. I have been forced to always use the Modify Dimensions wheel which I used to use occasionally when locking the scale for making changes to the sketch. Anyone experiencing this? IS there a fix? Any help would be greatly apprciated.Steve
Hi all, I just have a question about showing dimensions with Creo Parametric 7.0.11.0 . I know some work-arounds, but I am just curious if this is possible... When I make a driven dimension in a part file, I can show that dimension at the higher level in the assembly model. I can't, however, show that dimension in the drawing? It does work with other annotations like datums or notes, but not driven dimensions. I can get it to work if I put all of the driven dimensions in the part into an Annotation feature and then show that, but that seems like a weird workaround? Is this the intended functionality and I'm just trying to do things a weird way? Attached is some screenshots of a test assembly. Also the reason I am doing it this way is that I have an inseparable assembly with helicoils, pins, etc... and my company is still stuck with Creo 7. Thanks in advance for any help!
Hi everyoneI have an issue with the distance tool in Creo View Express.If i open an DRW file (created in Creo 7.0.2.0) in Creo View Express, and use the distance tool for measure something, the measure result is incorrect like a wrong scale.But the scale of the DRW is 1:1 and in Creo View Express are 1:1.I noticed that the error of the measure follow the dimension of the sheet in the DRW file (see the attacment).But if i export the DRW file in DWG file, and i open the DWG file in Creo View Express the measure are ok.Some one can help me? thank you
With no fanfare or warning (or even a note on the help page), exporting a design sheet will save your design. If you erase parts that you do not want exported, this will erase them from your design PERMANENTLY. At a minimum, the program should warn you and let you stop the process before it destroys design information. A better solution should be to give the user a choice to save or not to save.
The Layer control screen shows the options selected for each layer and allows the visibility to be set by clicking on the Visibility cell for the layer and allows the Name to be set by double clicking on the Name cell for the layer.It would improve the ease of use if the Unselectable, Protected, and Format settings could be set by clicking on their cells instead of selecting a layer, selecting Properties, and changing the setting. The Color settings could be double clicked in the same manner as the name to bring up the color selection menu.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Using Creo Schematics creating wiring diagrams, block diagrams and circuit diagrams. Electrical industry. I am a Electrical Designer maintaining our Schematics library and datatables. 2. What product and version are you currently running?Creo Schematics 4.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.When importing geometries from supplier DXF, DWG, etc. Schematics will not import if larger than the sheet size. instead provides an error and does nothing. We need a way to import geometries directly with an option for "resize to fit the sheet" same way creo parametric currently works.4. What is the use case for your organization?We use geometries from suppliers in which case it may be larger than the sheet size and will not import if larger than my sheet size.5. What business value would your
Our standard drawing units in most of our designs are still in Imperial Units (Inches). We have started to use metric for our Creo Schematics designs. To transfer a symbol or schematic over without having to recreate it we export a DXF and import to Creo Schematics. If we were previously using inches we get an error message stating: "The sheet Model cannot be imported because it is too large or the units are incorrect" While it's simple enough to change the units and re-export. This assumes we have a native file. If we only had a DXF we'd have to open it in another program, convert it, and then try to import it into Schematics.You can also create formats in the imported units. It would just save time if it was able to do the conversions on the fly. I would like to see a dialog box that pops up saying "The sheet Model is too large or the units are incorrect. Do you wish to attempt to convert the units or cancel import", or even better to check to see if the units are equivalent f
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Marine industry: end user 2. What version of Creo Parametric are you currently running?5.0 with Creo Schematics 7.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Electrical engineers build a schematic in Creo Schematics and send that design to the Creo users. Sometimes they change the text labels when they drop the blocks/ fibers , removing the parameter functionality. I would like a simple option to highlight parameter driven labels a different color, temporarily until a repaint is made. Then the Creo user can see when the labels are not using/pushing the parameters thru the XML data. they can then correct the labels and sync them with the parameters. The difficult part would be to separate a string such a as <AMP> AMPS to show&nbs
Check out this video on Creo 11 from PTC Application Engineers. Presenters: , Lino Tozzi (Technical Specialist, Fellow) & Tom Quaglia (Creo Segment Sales). (view in My Videos)
Hi, suddenly my creo started giving problems with the snap no longer taking references, I tried to load the config.pro file that I had exported previously but it still doesn't work. if I open a new project the snap works correctly
hi, i want to change the name of all parts to assembly & part number after assembly modeling ,before detailing i saw somewhere to do this ,they are running separate add on program. can anyone try to help me to do the program? regards sreelal
Using Creo Parametric 7.0.9, is there a setting that the tabs of the combined views on the bottom of the page are ALWAYS shown? I've set the config.pro option display_combined_views to yes which is better because then they are easily accessible, BUT...When I for example click on "Edit dimensions" in a model, then the tabs are hidden, this is not a problem but what causes it is that the size of the window will get slightly larger and then the shown dimensions jump also a bit lower which causes that you just click next to the dimension you want to edit, VERY annoying.. (view in My Videos)
Hi there, I'm tring to develop a program with using Pro/Toolkit and it needs item IDs (not feature ID) for parts and detum planes.How can I see them with Creo Parametric?
good evening, I have a problem in closing the boubdary blend of this propeller. I'm trying in every way but I can't. Can anyone help me ?? Thanks
Hi all, I'm looking for best practices for including the end product assembly in a tooling assembly. Tips on things like: Assembly mode:managing the tooling assembly combined with a (possibly) large end product assemblynot wanting the product assembly to affect the tooling BOM - simp reps? Include command?not wanting accidental changes to the product assembly while working on the tooling assembly - reference control?visual cues - product assembly distinguished from the tooling assembly Drawing mode:phantom lines for product assembly in certain views I'm the CAD admin, not a tool designer, but asking for a few of the designers in our group. Any other considerations I might be missing? Thanks in advance!
Hi I have a question, when you are into asm and you want open a drw of part you can with the macro or not? because if I try to open a drw of prt not open a prt but open the drw of asm Thank You
Solidworks and Catia have had this for over 10 years. Get with it PTC, you presented this prior to Creo 4 release. 1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders. Medical manufacturing, Product Engineer 2. What product & version are you currently running? Creo 8 3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. Sweep an end mill along a 3d curve and properly represent the resultant geometry. I can program it in CNC, but I cannot show it in CAD, nor cad I render or simulate the proper geometry. 4. What is the use case for your organization? we do this all the time. 5. What business value would your suggestion represent for your organization? It should be obvious, we cannot show the proper part geometry across the platform. We cannot simulate it, render it, or describe in cad mod
When adding Integer 1 in unattached note in creo drawing, its printing as I, attached the Image.The same is working in my colleague's creo.Any configuration need to be done?Creo Version : 9.0.3
Is there a way to set a specific call out a specific UI file in a psf? I am encountering an issue where users click on the Live Simulation tab and it pulls a license for that feature. We have a limited number of them. The psf is set up to not pull the license initially but that does not prevent the license being pulled in session after clicking on the tab. IMO Creo should not allow that license to be pull just because someone clicks on a tab but it does. I dont really want to turn off the tab on the ribbon as its annoying to have to go in and turn it back on when some actually wants to use it. Is there a way I can call out a specific ui file when starting creo either through the psf or other means?
As per the original post. Hi there, I'm having a similar issue where I renamed an uploaded part that I had checked out. I'm now getting the same error (Error: File name changed). I tried updating the part, synchronizing and updating my workspace and nothing has fixed this... I get the following messages in the console when I did those actions: Nothing is Out Of Date in Workspace.All the objects in session are up to date.Nothing to Synchronize from server side workspace. Any idea what else could help? Thanks!
Check out this video on Creo NC Turning from PTC Application Engineers. Presenters: Lee Goodwin (Solution Consultant, Principal), Lino Tozzi (Technical Specialist, Fellow) & Tom Quaglia (Creo Segment Sales). (view in My Videos)
Good morning everyone, I found that split body option is very atractive for a way of designing for my company and i would like to introduce it for other designers. Before i do that, i need to solve one problem and thats why im asking you for help. Problem:I have part with M10 holes in pattern and i want to divide this part in two separately with SPLIT BODY option. After dividing a part i use CREATE PART FROM BODY to save new part. Everything is ok until i open new part. new part is missing surfaces (for example - threads of M10 holes). I cannot find any solution for this problem. If anyone has idea how to copy it or at least, how to mark thread after split body divinding, i will be very grateful. FYI, i work in CREO 7. best regards,Szymon Biela
Hello, In Creo Manufacturing, I would like to use Auto-Drilling for counterbored screws. Does anyone have experience with how to input the hole dimension values into a Custom cycle, or alternatively, in which drilling cycle could I input these values from a table? Thank you in advance for your assistance.
How do I implement something like the video linked below in Creo Parametric?Please explain in detail how to implement it. https://www.youtube.com/watch?v=0_IxaoZpBjk
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 9.0.6.0 2. What is the problem?When editing hatching in a drawing, for areas (like an ECAD Keep-Out), it uses the old menu manager system and not the newer ribbon in Creo 9 method that is used for section hatches. This is confusing our users who are expecting a consistent process for managing hatches.3. Are you using a workaround? If yes, please describe it.No4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.The hatching mechanism and process would be consistent for all use-cases within Creo5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)This is causing slow down, confusion and some users are not even attempting to edit the hatching for areas as it is difficult. All of our produc
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.