Recently active
I want this:SCALE &det_scale[.1]by default.I would suggest that a detail option be added to control the number of trailing zeros and that any numbers beyond the # of decimal places set gets rounded.Discussion here:Change the default number of decimal places for view scale?
Comparing a CAD structure to a WTPart structure doesn't give you the whole picture. You have to go back to the WTPart structure, right-click, CAD->Manage Deleted Occurrences to see what was removed. This functionality should be integrated into the comparison tool so you can manage the whole thing in once place, when comparing a CAD structure to its linked WTPart structure.
The stereotypes currently have the ‘On Delete’ event exposed on them, allowing them to specify the action when the delete key is selected. If this could be exposed for the symbols on the diagrams then we would have the flexibility to determine the action when the del key is used for a symbol on the diagram. This would enable the profile developers to handle the 4 different delete options (i.e. Delete, Delete from Model, Delete Redefinition from Model and Delete Top Level Definition from Model) in a way that is relevant to the profile.
Hi Everyone,I have been doing some testing on Creo 4.0 M010 this week, and really find that the Extrude to Surface, then Offset to be a very nice functionality that has been added (great job PTC). We design many extruded parts that are typically extruded to a common plane, then depending on the usage, can have material added past that plane, or have material removed from that datum plane, and this is EXACTLY what we needed to accomplish this without using end cuts or having to use a Blind dimension instead of using the datum plane reference. Again, for extruded parts, this is incredible.That said, we have many of our products designed in SheetMetal, and at times, we replace extruded parts with formed SheetMetal parts, and design similarly. So after I had seen this functionality within Solid Part mode, I also wanted to see whether this worked in SheetMetal mode. The basic end extrude is the same setup as solid mode, and if you are extruding a surface, this acts t
i would like a feature like solid works "pack and go" where all the assembly parts and there associated drawings can be saved together. similar to save backup, but now when i do a save backup the drawings do not copy with the parts. why would you not want backup of the drawings, they just as much work or more to create.
The current method of highlighting components by drawing the wireframe works well for small, simple parts but scales very poorly, and rapidly becomes extremely slow for larger parts, such as a cast gearbox casing for example.Perhaps it's time to throw away the existing highlighting method (which seems to be entirely CPU-bound) and look for a faster, more efficient routine, maybe using the GPU?A good use case is looking through the results of a Global Interference analysis. If the pair of components highlighted is, say, a nut and a bolt (where the thread volumes overlap) I can spin and manipulate the entire assembly easily and smoothly (5-10 fps, I estimate) to identify the location of the interference. If one of the components is the main gearbox casing, however, it can takes 6-10 seconds per redraw! It also seems to deal badly with a highlighted component extending outside the viewable area - this seems to slow it down more as you zoom in.My system has a reasonably r
Currently, on a non-circular detail view label, I have to use "edit attachment" to move the arrow placement. The little black grab handle is there, it looks like you can grab and move the attachment, but you can't. You have to right mouse on the leader, edit attachment. Please add the ability to use the graphical manipulation handle on the end of the arrow to "edit attachment" location of the arrow on the non-circular detail view labels. Edit Attachment on non-circular detail view label
Currently the Creo Parametric Merge (external Merge and Merge/Inheritance) feature is not fully compatible with Windchill/PDMLink (WC). Please make it work correctly inside PDMLink.Like an assembly, a merge features reference other components. However, unlike an assembly if these components are updated, Creo shows them as un-regenerated BECAUSE PDMLink locks the object containing the merge and doesn't allow it to show the latest. There are some config options that attempt to address this but after extensive testing and Calls with PTC they do not work (or are inconsistent).This is NOT a Creo issue, because if you go offline (outside of WC), everything works perfectly because the object containing the merge is not locked. It is the fact that apparently WC currently does not recognize when the merge feature is used and pulling in references from other models and therefore does not take the latest version, or if it does then it shows regeneration errors. Windc
Creo Simulate should have a method to allow the display of the worst case stresses of multiple load cases. This behavior would be better then the current practice of showing a total superposition stress state from the various load cases. The super position method either over reports or under reports the actual stress state.For instance, I have 3 load cases to review. I must review each load case individually now. As an example. If I had a 1in^2 rod which has two load cases. 1) A 10 lb pushing force along the rod, and 2) a 200 lb pulling force. Then Creo would display a total stress of 190psi. It would be better if Creo could display a 200 psi result. As a bonus feature, the Query function should report the load case which produced the highest stress in the area being queried.
In the viewport setting, please add the function of the line width setting of the 3D Spline like a 2D group.
We wish to store parts always in english speech. (PartLibrary --> ModelManager) But when the user log in german, the parts are in german. (lang=german) We search a solution. in German: Wir haben 3 Entwicklungsstandorte. Benutzer loggen in deutsch oder auch in englisch ein. Bei der Ablage von PartLibrary-Teilen, werden diese in der jeweiligen Sprache abgelegt. Wir möchten dies nun für alle vereinheitlichen und die Teile generell in englischer Sprache ablegen. Hat hier jemand eine Idee? Danke im voraus. Gruss am
조건1) 어셈블리에서 횡단면 생성 후, 횡단면 활성화상태 2) 컴포넌트 추가후 조립시 컴포넌트도 횡단면 활성상태 조립시 불편함3) 수동 해결방법 횡단면 정의편집 후, 모델>선택한 모델 제외 선택하면 되지만 번거로움 발생개선 요청사항자동으로 해결하는 방법 개선요청
We would like to export an Creo Elements/Direct Modeling assembly to a Step Format [AP214] with the ModelManager-Attributes included. (Add an Option) Regards uammann
Currently the reference collector when creating a UDF only allows for one reference to be selected. But some of the more advanced features can require multiple references. An example of this is the Offset Tool to offset an edge or surface. Sometimes it is necessary to select multiple surfaces such as both halves of an outer diameter to create a reference set. Currently if the Offset Tool is used in a UDF there is a chance that feature will fail when placed or it will not function as intended.
Hello All,I have build up a flexible tube with points and curve (spline).These tube I add to my assembly.The end- and start-Point of the tube is guided by flexibility so that the end- and start-pointfits to my connection-point in my assemly.But now I want to edit the curve-points between end- and start-point.I have to do this in the assembly, because I want see where is collison.An dynamic editing is in assemblies not possibleIt is only the tube-part possible (see white square at the measurement)Why not ??Please vote for this idea RegardsMatthias
3D Drugger does not operate when 3D model is expanding displayed while making the section. Please improve it.
If My Model Is Half Ring . And HOLES Are On ONE OF ITS SIDE at So & So PCD. I want To Show PCD Like Half Circle Center Line, But Its Showing Complete Circle IN Drawing.
It would be interesting to have an option to disable automatic regeneration of model. This would save time as a result of several modifications to the assembly components or to the model.
The chamfer dimensions of the import feature can not be displayed as 3D dimensions when Drawing. As a method to solve this, there is a method to recognize it as a chamfer by a Feature recognition tool. However, it has the following conditions. The length of the slope is equal to or less than the thickness, the length of the plane adjacent to the slope is 1.2 times or more the length of the slope. Since there is no way to avoid these conditions, work efficiency is bad. Therefore, I want you to eliminate the above conditions.
Currently when exporting an image (File -> Save As -> Tiff, Jpg, png) it exports any text that is displayed. Below is an example. It would be nice if if didn't do this or if there was a config option to turn it off.
In Creo 3.0 and Creo 4.0, when using the Measure tool on the Analysis tab, the pop-up results dialog box remains a fixed font size, and there is no way to affect that font size. This presents a problem when creating screenshots for presentations; often the font is too small, and the user is forced to perform copy/paste/resize tricks in order to get it to look right. Or, a user may have poor eyesight and simply have trouble reading the smaller font. Providing a config.pro option (e.g. "measure_results_font_size" with values "small"*, "medium", "large") that controls this would enable finer control and a streamlined process for presenting results in a screen-captured format.
Maybe its me but I don't believe the persepective view in drawings has ever worked. The command function has been there but the settings don't relate the same as in the model. When you change a view to perspective in drawing thats it you cannot change back or alter the perspective settings you have to delete the view and try again
Wenever a part that contains a BMX feature (say an Optimization feature for example) is opened without a BMX license (say the floating license is tied up by another user), and a change is made to the part, the BMX feature does not recalculate and update as its supposed to, AND there is NO notification in Creo that the feature did not calculate. Nothing in the Notification Center. Nothing in the Message Bar. Nothing! Can a notification at least be created, so in a case where a BMX license is not available to run an existing BMX feature, the user is made aware?
We frequently use Microsoft Surface HUB 84” platforms for discussing CAD Models on meetings. It would be fine if we can install Creo on these platforms. In these cases we can modify a Model together with our partner. These platforms have Universal Windows Platform (UWP) OS.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.