Recently active
Currently it is only possible to update/convert user defined parameters to local restricted parameters (Help Center Link ). This does not work when attempting to convert/update user defined parameters to table-restricted parameters. The table-restricted parameter definition is not recognised if the user defined parameter already exist. The only workaround is to delete the parameter, and then recreate it... but then you run the risk of setting a different/incorrect value which could be undesirabl (especially if the original value coincided with a non-default value of the table-restricted parameters)
Since Pro/Program has not been updated since a long long time and it's too verbose to edit, I would suggest that PTC tries to implement something that is already present in some other CAD packages: Conditional Features Conditional Components (or selectable compoents) Conditoinal Features would be a feature associated with a boolean parameter. If the parameter is false, the features is supressed. If the parameter is true, the features is resumed. This can already be done using Pro/Program, but it's tedious to edit a Part or Assembly to include conditional features or conditional components. Worst yet, not all CAD users understand "programming" to be able to Edit Pro/Programs. But most users can easily select a feature, right mouse click, select a menu that might say "Make Conditional Feature", and in a pop-up window select a boolean parameter to associate with the feature. (or component). Adding the option to "Remove Conditional Feature" to make it a r
It would be very useful for the external Copy Geometry to be able to Copy WHOLE sketches. Currently we have to copy individual lines or circles from the sketch using the reference "Chains" field, or copying points or csys of the sketch using the "References" field. If we add later additional geometry for the sketch, the added geometry is not included, unless we redeine the feature to manually include it. To include the whole geometry of the sketch, and be parametrically associated, we could edit the "Chain" from the standard to the rule-based selection, then we could include all curves in feature, as shown in the next image. But this does not automatically includes all points, and sometimes we use sketch points to define holes centers and want them to be shared across different parts. I suggest including an additional field below the Copy Geometry user interface to allow us to select whole sketches to be easy and parametrically shared across parts (typicall
During the preview of tool motion is only the parametric tool visible. Please add a capability to show the solid tool here. I referee to article CS324954
Please add a new scan type for grove turning. This should be used for automatic creation of "comb" tool motions
The "switch cycle" functionality is only avaible for drilling features. It will be a big enhancement to add this also for turning features.
Only Synchronous applications are currently supported in Java OTK. Otk.jar does not have the required libraries to run Asynchronous applications. This is a step backwards from Java OTK Free (J-Link), which is free and allows both Synchronous and Asynchronous applications.
This idea is to allow ModelCHECK to interact with Windchill to refer to the MC config files, look in to Folders in Windchill for Material Library for material updates.... Because we store all our standard files in Windchill library and will be accessible by all designers globally from different parts of the world.
It should be great to add to Modelcheck / ModelUpdate the functionality to control 3D models views.Actually there is VIEW_INFO & PRT_CREATE_VIEW to create Views in PRT (same in ASM)We need something like:PRT_VIEW_UNWANTEDASM_VIEW_UNWANTEDPRT_VIEW_RENAMEASM_VIEW_RENAMETHANKS !
Add Multi Body part functionality within part-mode, so within one part several sub-parts can we indentified for example a weld-part consisting several tubes in 1 part. Due to the Multi model part the assembly is not needed and external references are avoided. Also copying of bodys within a part is more easy when using Multi bodies. Multi body parts are also very helpfull for creating shell meshes when doing analyses with FEM- software like Ansys Workbench
Hi,It would be useful to have an option to avoid log files when exporting drawing to DXF and DWG.intf_generate_log_file no -> this option doesn’t work for export.intf3d_out_create_export_log is a new option in Creo 4.0 but doesn't work for 2D exportintf2d_out_create_export_log would be greatBest regardsNicolas
The "branch" command does not allow me to select the line to connect the tubes, what could be happening? (view in My Videos)
How to construct ProIDTable for the assembly component I got throgh ProSolidFeatVisit api. Need assembly component path for the collected part file. ProIDTable id_table = {Array[0].id} works for the part file collected from the top level. If the required part file present inside a subassembly, this logic fails. Tried getting asm comppath typecasting ProFeature* Array to Proselection as below, didn't work. ProSelectionAsmcomppathGet((ProSelection)&Array[0], &compPath). Any ideas please?
I’m having an issue with trying to get a User defined parameter PIPE_DESCRIPTION from the linestock to the piping start part parameter DESCRIPTION.This is so when creating a pipe solid, each pipe part will have the PIPE_DESCRIPTION parameter value added to the DESCRIPTION parameter.Then I can bring this into my table BOM, along with all the other fittings and parts which have the same parameter.Is this possible or is there another way?I'm using Creo Parametric 10.0.4.0
Where is the ProRasterFileWrite API.Why can't I find it?I want to take screenshot for graphics area in Creo Parametric through toolkit.
In Creo 6.0, I am trying to create a simulation file that uses the family table to bring in the desired instance. The simulation setups (constraints, forces) fail when switching instances. I believe this is because when selecting surface regions, simulate cannot reference the feature as the part files usually do in the family table. Simulate loses the surface region reference because it is trying to access the specific feature from the specific instance where the simulation setup is created. Is there a way around this, or is this possible in newer versions of creo?
Hi, I have to import a CAD file from ALTIUM software.The CAD file is an electronic board exported by the software ALTIUM in a 25 MB .step (or 20 MB .x_t).ALTIUM can export the files format in the picture below.When I import this two types of files, they opens in a long time.How can I reduce the time of uploading of that types of CAD models? Best regards, Michele Barile
I am using Creo Parametric Release 11.0 and Datecode11.0.0.0Error message: "Customizing parts is not available in the standard version. Please contact your account manager to upgrade." when trying to add a fastner to an assembly. This was available for us in Creo 10.
Our requirement on the shield port/drain wire is assigned to multiconductor cable. Both sides of the cable is connected but the shield port/drain wire is terminated (connected) at one end of connector and unterminated (not connected/open) at the other end of connector. Once the unterminated shield wire is defined in schematics, it needs to be exported into XML and use it parametrically in the harness drawing without doing any additional manual work in the Creo cabling. What is the best possible solution to have a shield port/drain wire as Unterminated. We use CS 7.0 and there is a document available in PTC website. But the info is not sufficient for us to define and use the shield port/drain wire as Unterminated parametrically. Any additional information or videos can really help the users to understand better.
Working in Creo 10 I have a note on a drawing that I need to call out a combined surface area for two separate areas on the part. With single surface areas I like to drive the note parametrically by creating a measure feature in the model and referencing it in the drawing note with "&AREA:FID_XXXXXX[.1].Which ends up with this, which is what I want.However, to have both surface areas in one note I have to add them manually and input them as text, non-parametric. I've been trying various takes on this: "&area:fid_xxxxx1+xxxxx2" with no luck. Does anyone know how to combine both values into one parametric note?
Hello Support,after installing Creo Schematics 9.0, when starting and closing the Creo Schematics application, our EDR software detects the .bat script that Creo wants to run every time. Each time it is a random name, for example "bg-hpul3.bat".The file has a different name and SHA each time. The only common point is the file location, for example "'c:\users\username\appdata\local\temp\bg-hpul3.bat".1. Do you know what the following script calls?2. Is this script responsible for some Creo Schematics functionality?
1. What product and version are you running?CREO Illustrate 10.12. What is the problem? The problem is that it's not possible to add a second leader to a callout.3. Are you using a workaround? If yes, please describe it. No I haven't a workaround for this, execpt to overlap two callouts.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation. Because the same callout could be used to give the same information for both area of the 3D model. 5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)This improvment will add more flexibility to the users to create more intelligent callouts and illustrations.
Hello, Does anyone know if Creo 8 or 11 will display higher than 1080p. We are getting new offices and are trying to decide on new monitors. Does anyone know if 1440p is worth it from experience when you mainly use Creo? Thanks in advance, Lex
Hello, When you buy a Creo Licence, they add a creo "home use" licence. If i install this licence on my personal computer, can I make commercial use of it ? But without any link with my employer who purchases the initial Creo license for my work. Concrete example :- I work in a design office of a private company with a Creo license. So i have a "home use" license in addition. On my personal time, the week-end for exemple, on my personal computer (no connection with my employer). Is it possible to design parts, print it in 3D and sell it with self-employed or independent status ? Thanks in advance.
I have the huge assembly. One of the drawing view have local section. The option "remove_cosms_from_xsecs" - set as "trim". In this case the section is shown correctly, but some cables are not visible or partially visible. When I change option "remove_cosms_from_xsecs" to "total", then all cables become visible, but section looks strange. Please see attached picture: there are shown displaying with different settings. Maybe somebody knows the secret trick how to make all thick cables visible and at the same time so that the local section is displayed correctly?I use Creo 9.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.