Recently active
I am using Creo 9.0 and have been using the Welding application to put solid fillet weld features into an assembly to show where welds are located. There are two assemblies and their associated drawings I have that are very similar. In one of the assemblies, the weld features are defined as solid and there is only one simplified representation (Master Rep). These weld features do not show up in the repeat region BOM on the drawing, which is perfect. On the other assembly, there is also only one representation (Master Rep), and the solid weld features DO show up on the repeat region BOM, which is not what I would like. Neither of the repeat regions have filters applied, and I am trying to figure out what the difference is so I can remove the weld features from the BOM table without having to use a filter every time. Is there a setting or option I am missing? How can I turn off the weld features in a BOM?
Hi, Is possible to disable or remove the dashed line that appears during assembly parts in creo parametric under edit definition ?I want to keep the surface selection view but without the dashed line that help to position a single part for example.I'm using Creo Parametric 8.0(see the attached below) thank's in advanceFabio
I am using Creo Parametric Release 5.0 and Datecode5.0.4.0After importing a sketch (DXF file) into a drawing, Creo performance (zoom, pan) drops drastically.
If I have a multi-bodied part I need to first create several part files then individually export each as an STL to save parts for printing. It would be nice if I could easily export without creating several extra parts that I don't otherwise need. It would also be good to do this from an assembly.
I am using Creo 9.0.5.0. When I replace models in a drawing, the drawing models menu manager is "hiding" behind the drawing instead of remaining on top of the drawing so I have to tab to it in order to be able to click on "Done/Return". Anyone else experiencing this? I moved it to the right, but after closing and reopening, it back to the same spot. vs Thanks, Dale
I'm brand new to Creo 8.0 after spending the last 15 years using Inventor. I typically use the pan feature much more frequently than orbit and I would like to swap the functionality so that clicking the MMB allows me to pan, and holding shift while clicking the MMB allows me to orbit. I did see someone had asked this question back in 2017 and there was no solution given, but I am wondering if anything has developed since then. Thanks!
Hi i'm AndreaI'm using Creo 7.0.2.0, i would like to export my drawing in an immagine in png format (without the background).I know it's possible to export in jpg and tiff format, but i haven't found the png format. Can someone help me, please?thankyoubest regards
Hi Please let me know how to strikout the note as shown in attached pic. currently we are writing the text and then drawing line above it. please let me know is it possible to directly strikeout the note in creo.
We have a scenario where i would like a certain folder on a network drive to have the instance index updated. Id prefer it be a behind the scenes action like at a command prompt or batch file. any thoughts? currently running Creo 8
I am using Creo Parametric Release 5.0 and Datecode5.0.6.0 Good morning,I need to know how to export and import parameters in CREO 5 Thank you. Here are the errors that I facedno sign of error Translated by the Community Moderation using Google Translate ----------------------------------------------------------------------------------------------- Buongiorno,Ho bisogno di sapere come esportare e importare i parametri in CREO 5Grazie.Here are the errors that I facednessun segno di errore
I have an assembly that I've created a section view of, and I'd like to export a file (preferably something like a CSV) that contains a list of the XYZ coordinates of the section. Ideally, I'm trying to just get the coordinates of the section plane's intersection with the top surface of the model, as if I was tracing a laser measurement tool along a line over the top surface. How would I accomplish this? I'm using Creo 4.0.
How to block loan for 2 days for Creo Parametric?My client wants to decrease the number of loan days instead of increasing it. Translated by the Community Moderation using Google Translate ----------------------------------------------------------------------------------------------- Como bloquear empréstimo por 2 dias para Creo Parametric?Meu cliente quer diminuir o número de dias de empréstimo em vez de aumentá-lo.
Reconfigure crashing when trying to start. Getting a WER-Dump (pim_re.exe) which i cannot access. Using Creo Parametric Version 9.0.0.0. WER-Dump is included. Any ideas on how to fix this?
Has anyone tried to retrieve a new license file this week? We purchased some additional licenses and I added them to our server yesterday but I have not received the new license files. Usually I get a new license file in about an hour. I also requested a detailed license report about 4 hours ago and it has also not shown up in my mailbox. I did get an email about a case I opened, so ptc.com is not a blocked domain.
Hello!I have a problem in the drawing. The base part's crosshatchinghanging in space inside my fasteners.The holes are made in the assembly
Hi Creo colleagues We use Creo 8.0.4.0, and I try to perform the views primarily in 3D as Combination States before I apply them in 2D drafting, This problem is somethin I face only for the 3D visualization. For cross-section view I face the problem that an annotation derived from the feature dimension becomes invisible because I cut-off the attachment point of the dimension. See pictures: picture 1 with invisible dimension 15:picture 2 with highlighted dimension 15, selected in the Detail Tree:I the selected dimension is released it becomes invisible again. The dimension becomes invisible because the attachment points of the dimension is cut-off by the cross-section. (Experience from several similar situations) If I switch the section direction the dimension 15 becomes visible. BUT, I cannot switch all the times views. Or let's say "I don't like to switch" views which are more complicated as the shown one. This would lead to undesi
Hello,As the topic, How to select multiple options from one module model?This problem we meet in this kind of situation: A customer wants buy two options in one proect(one for spare compents);And this image show the problme : Creo knows I want select these two options,there is an alert incon(I dont know how to get the waring text):And after I click "Create Product Variant" , the reslut is not a normal assembly 3D model, but is a new configurable product like this:Would anybody knows: where the mistake I made, and how to correct it that make Creo generate a normal assembly model with two options.Thank you!
I have seen this video https://www.youtube.com/watch?v=Hky98wUL-jo&list=PLRhPac0z_f-FIsmKbE1fR1ZlEMXBZcZvN from David Martin on worst drawing practices. There, he says that most dimensions should come from the model. In this video https://www.youtube.com/watch?v=cxKmlE8afhs on worst modeling strategies, he says that you should not create your model in a way that represents manufacturing. But, when I make a drawing, it is mostly for manufacturing. And if I did not build my model in respect to manufacturing, then I can not take the dimensions etc. over from the model. I also have made the experience that when I make a new model, it is built up in a way that is different to how it is manufactured. For example, the lathe operator maybe needs diameters and everything dimensioned to one edge of the part. But, when I modeled the part in Creo, I maybe dimensioned a revolve in reference to another revolve. So they do not reference the same edge. Does somebody maybe know how to deal with thi
I created a project using the creo framework module and now I need to create the optimization of cuts for rectangular tube profiles, for example:I buy a 6m bar and I need to know the best way to use the pieces of everything to cut this bar Is there any way for me to create this with PTC technologies ?
Has anybody managed some sort of shortcut/mapkey for this yet? I'm taking about quickly opening a drawing of same name when the model is on screen, the way you can open a model by right clicking in the drawings model tree . .
The Archimedes screw is a water pump that allows water to be raised from a lower to higher elevation. It consists of a central shaft with a helical surface, which itself sits within a cylindrical channel. Your challenge, should you choose to accept it, is as follows: Design an assembly for the Archimedes screw capable of lifting water a vertical height of 1.5 meters. The assembly should contain at least one mechanism connection. Your Archimedes screw does not have to resemble those in any of the images here. It can be either hand-operated or motor-driven. (The motor can be represented by a simple box part model.) Create a rendered image of your model. (Optional) Create a Kinematic Analysis using the Mechanism Design Extension (MDX) and output a movie of the playback. Note that every license of Creo Parametric comes with MDX. (Optional) Create a rendered animation of the motion using the Design Animation Option (DAO). Every license of Creo Parametric comes with DAO. In your su
Flexible offset is changing the chamfer dimension from 0.50 to 0.30 with 0.00 offset. this should not happen.I am using Creo 7.
Hi all. In Creo toolkit how to take left and bottom most edges from the drawing view(not a model view)?if anyone knows pls help me Thanks
(view in My Videos)
I need to create a Logo to place on a Drawing Template in Creo Parametric 8 but when I try to create it it shows only the lines. How can I make it of a solid color?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.