Recently active
It's 2016 and we can buy VM instances from Amazon on demand. It would be great if simulate supported parallel processing across multiple machines. Not the current distributed model where each job is farmed out to a single machine but the ability to spread the computation over multiple machines to decrease run time.
Actually you have to put a value or you can use an alternative technique by creating a relation analysis with the result is the goal for the feasability....Use a parameter directly for a soft parametric, isn't it a good idea?
Let's get some useful functions into the sketch mode and add an ability to pattern sketch items!
Flatten Quilt is powerful function in Creo parametric 3.0 . Some users need this function in the Creo E/D Not acceptable for engineers to create fillet for all bent areas. Quilt surfaces need to be unfolded when the model is unfolded. It can unfold some Irregular Bend model(like FPC) that don’t need K-factor.Below picture
A.part shares to A.1.part.Thair can chang together.I think that it has the UnShare can break their relation. when A.part is changed , B.part isn't changed.Sometime I need their restore relation,like Reshare function,they can change together again.
Some situations need to create the same form ,but their width or length is differentBellow pictureI can pattern a lot of hole, but I need to move their face to n+1mm one by one.Maybe the pattern can pattern the same form and change their width or length.Like creo parameter pattern function.
Add support for shaded views in drawing exports to TIFF, JPEG, and other raster formats. Raster formats are more efficient for 'report' style batch printing. An example is batch printing production orders from ERP with the latest released drawing. Current functionality in Creo 3.0 - shaded views are ignored completely by the export.
Would be helpful that ProIntf3DFileWrite routine would be alble to export in obj format
Hi PTC, Please fix the following problem introduced in Creo 3: Creo Simulate fasteners and materials fail instead of being suppressed while in a simplified rep causing meshing failures and analysis running failures or to terminate and fail. Refer to PTC case number:13398407 Sample files of the problem have been attached to show the issue. Basically you can't use simplified reps now as of creo 3 to run alternate design analysis. Thanks, Don Anderson
I have tried some times that users come to me and say their Creo crashes. I try to use Performance advicer to get a better idea of how big the problem is. But even when I get there ID number it is almost imposible to find them if they are not in one of the Top 5 listes. It would therefor be a Hugh help to be able to search on these ID numbes. EDIT: My descriptions was a bit weak, hopefully this explain a bit better I use Performance adviser to find out have many, "many crashes" are. (that value is very different for many users) And to see if I can find a Patton in the data that can explain why they have many crashes. Finding the users in the list takes a lot of time and I have a few times not been able to find them, spending an hour going thought the list just to learn that the data is not register. But if I can make a search I can very fast find the entries and verify if there are an entry at all.
I usually work with large assemblies in Simulate, sometimes with more than a hundred assembled parts. I am not able to mesh the entire assembly, if I don't change the accuracy from relative to absolute, and try to use approximately the same values for the parts. I have to open up every part separately and make this change, which is extremely time consuming. In Simulate, there is a Tolerance Report button in the Tools group. You can click the links of the part names and highlight them in the 3D-window. It would be extremely helpful, if you were able to click on the tolerance values in this list, and be directly routed to the Prepare -->Change accuracy window for that part. This would save so much time! Another alternative would be to being able to just click a button and change the accuracy for all the parts in the assembly in one click.
Want to be able to add a standard set of manufacturing notes to drawing formats, which can be edited once detail drawing is created. Do not want to use a table
This is a product idea conversion of case C13362807. In Creo, dimension arrows are sometime shown outside the witness lines and sometime inside. Currently there is no way to determine the display type of arrows (arrows are placed inside or outside the witness line) for a given dimension; no API support is available for this information in Pro/TOOLKIT. Without this information, Creo PMI can not be represented correctly in other derived formats for downstream usage. This gap results in wrong visual representation of PMI, therefore we need support for this information in Pro/TOOLKIT.
When mirroring a regular part with features, the below are issues when using INSERT HERE that cause work-flow changes that are different from every other feature:Insert Here cannot be dragged up and down the model tree... only right-mouse-clicking on a feature will workAll features in the model tree disappear after the feature with the Insert Here when Insert Mode is active... even with the Model Tree set to show suppressed features.
We regularly send STEP files of our products out to customers and want to send only the external skin data. Suppressing the internal components does most of the job, but we still need to then create a shrink wrap and then open this to create the STEP file from. What's the chance of getting a single command or option within File\Save As\(STEP file) that takes the outer surfaces of the assembly and creates a STEP file using only these surfaces? It would save a huge number of hours and Mb of disk space. Cheers.
hi everybody, in my opinion it would be more comfortable to have 3D and 2D in the same file
We would like to deactivate the unnecessary moduls in drafting V19.0 or V20.0.Examples: - Windchill workgroup Manager - Verdeck - ParametrischThanks for ideas
get check boxes Collision Checking and Stop at Collision turned on by default when play tool path of an NC sequence and NC operation
Some users are quite experienced and the slow pace of some of the PTCU and learning exchange videos is basically wasting a lot of time. A suggestion from our field was that the videos could be allowed to be played faster and thus the users could get a level of awareness at double the speed in order to spend less time doing update training and so on.
Si potrebbe creare un backup di un assieme (asm) con tutto ciò che vi è collegato.Assieme => Sotto assiemi => Le parti di cui è composto => I drw delle parti che lo costituiscono.Questa operazione avrebbe tre benefici:Copiare lo stretto necessario evitando di copiare un'intera cartella di lavoroEvitare di avere nuove cartelle eccesivamente pesantiDover copiare un drw alla voltaCordialmente,Arrigoni LeroyTraduzione con Google traslate:You could create a backup of an assembly (asm) with all that is connected.This would have three benefits:1.Copy the bare essentials, not to replicate an entire workbook 2. Avoid having is excessively heavy new folders 3.Dover copy a drw at a time cordiallyArrigoni Leroy
I want to 3D Access for free.It only has functions as same as other free viewer.Modify 3D etc. are unnecessary.
When the config file includes layer creation/management and has def_layer LAYER_QUILT, it should not create a layer when an iges or step file is being imported that is being solidified. Creo should only create the layer if the model could not be solidified and a quilt is created instead.
We would like to use a combination of Mapkeys and Batch Files to review models that ModelCheck can not do. Some of these checks require the results of very specific and complicated searches using the FIND/SEARCH tool. We would love if we could export these results so that the Batch file can analyze it. Currently there is no functionality to export these results.Thank you!
PTC, Please add the ability to allow the Diagnostics Window to show you where the invalid fasteners are location in the assembly. With an assembly with around 100 fasteners this makes it very difficult to trouble shoot the error. Thanks, Don Anderson
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.