Recently active
Would like to export a PNG or SVG with alpha channel to result in an image with a transparent background. I saw this same need in CS209915. PTC recommended creating a Product Idea which I didn't stumble upon, so I am creating one.
Redefine (and not DELETE and RECREATE) a master rep general view and CONVERT it in a simplified rep view for a PART drawing.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 11.1 2. What is the problem?Reference: Cases: 17800652 & 17808140 Article: CS447345 There are some key functionality differences between the way Creo View manages a PDF imported as a Drawing vs a Document. As an example, a PDF opened as a drawing can leverage the COMPARE functionality, but a PDF opened as a document can not. When opening a PDF from Windchill, the default preference is that it is a "document", NOT a "drawing"! Which means we can't use the COMPARE functionality in Creo View. When opening a standalone PDF, Creo View at least prompts the user whether it should be opened as a document or drawing. 3. Are you using a workaround? If yes, please describe it.Kind-of. We used the workaround listed in the article. However, that only works on NEW data in Wind
1. Describe the ProblemThis is a request to update angular views behavior in the drawing mode, so they behave the same way as combined views with dimensions normal to the screen. See video attached for reference. When isometric (angular) combined view is placed on the drawing in Creo 11.0.4.0, annotations are not displayed automatically. That causes designers to create same dimensions twice.2. Are you using a workaround?Yes - showing annotations manually on the drawing.3. What is the use case for your organization?Create 3D models with all PMIs defined in combined views, and then - deriving the drawing just by placing combined views on a drawing.4. What impact does this problem currently have on your organization?Dozen of work hours per month lost, potentially more in the future.
1. Describe the ProblemI often find myself plucking through lists of references that have been lost, one by one, to delete the broken ones. There should be some "remove all red". Example: you put a large set of fillets on various edges on a 3D solid. Then you edit the base model such that some of those edges disappear. The Round feature needs fixing, so you Edit it and find yourself with a table where some of the selected edges are marked red, because the do not exist anymore. There you have to select a row and right-click to get a Delete operation - for each, one at a time since you cannot select more than one - and there can be a dozen. In other dialogues, you have to select the row and click a separate button instead, which is marginally better. Sometimes you can select more than one row and delete several in one operation, which is an improvement. Sometimes though, you can select multiple rows but when you attempt to delete them all you find that you only deleted the
1. Describe the ProblemCurrently, hyperlinks can be assigned to 'stand-alone' notes in parts and assemblies. Hyperlinks can't be assigned to text or to cells in tables in parts or assemblies. 2. Are you using a workaround?No3. What is the use case for your organization?Note text in a table used for MBD for parts and assemblies should be able to utilize hyperlinks just like 'Unattached', 'On Item', and 'Leader' Note(s).4. What impact does this problem currently have on your organization?Lack of a more productive way to present information and uniformly display data for parts & assemblies
1. What product and version are you running?Creo Illustrate 11.1.0.12. What is the problem?All objects with the same Item Tag (Element-Kennzeichen) are automatically grouped together.That works fine!When instances are used in CED (Creo Elements/Direct Modeling), there is a different Item Tag for each instance:3. Are you using a workaround? If yes, please describe it.No workaround available in Illustrate 11.1 or 12.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Creating a Parts List is very time-consuming when manually grouping with customer attributes.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)It affects 25 concurrent daily users.
1. Describe the ProblemI would like to have a color management system in Creo Parametric. This would be similar to simp-reps and styles. I'm not aware of a tool to save different surface/component colors and quick switch back and forth. 2. Are you using a workaround?Just living with having to choose one set of colors or another.3. What is the use case for your organization?The main function would be to be able to save different color configurations for a part and assembly. One use case is that when engineering its nice to have contracting colors from component to component, but when presenting a product to customers its nice to have the design have surface colors which represent the final product. This would also have applications in communicating design functions such as identifying machined surfaces, or components with different material properties. A simple Color Manager would be a nice addition, and then advan
1. Describe the ProblemCurrently there's no direct API available to remove a section of 2D view. Please implement ProToolkit & Object Toolkit APIs to remove a section of view.2. Are you using a workaround?Yes - Using macro.3. What is the use case for your organization?We would like to update a drawing using customized Toolkit Application. We need to update sections as per user inputs. In such case we couldn't able to update the view because of API unavailability .4. What impact does this problem currently have on your organization?Minimal impact as we have workaround. But to improve the robustness of application the direct API calls are preferable.
Problem summary:3D PDFs contain consistent engineering content but can only render small models, making it impossible to send even medium-sized MBD engineering to outside suppliers. This is a sharp limitation on the extent and effectiveness of MBD implementation within existing PTC tools. Enhancement summary: During WVS publishing through Windchill / PLM, embed the source company’s local settings in the resulting CREO View file, so that any other outside company or organization that receives that file and opens it in CREO View (including CREO View Lite) can view its content identical to how the source company sees it. This eliminates the need for 3D PDF to send MBD engineering to suppliers and enables significantly larger models to be sent, since CREO View is a lightweight tool that can handle significantly larger models than 3D PDF. Details:To send MBD data to suppliers (who do not have access to our company’s internal instance of Windchill / PLM for security reasons),
Add the option "Save Copy and Open" to Save a Copy for parts, similar to the same operation with an assembly. This would prevent making changes to the original part when the new copy is the one that needs modified. Most programs automatically open the new file when a Save As is performed, Creo should work the same.
When working with large context in Creo Illustrate it is often necessary to check the surrounding of the parts in the scene. Today when switching between figures, SBOM and showing/ hiding parts the 3D figure is automatically updated. This can result in data loss in the 3D figure and work needs to be done again. Suggestion: Enable a setting where it can be controlled when the figures update: Automatically as today After being prompted when switching figure or saving Choose to only update selected parts / callouts:./ E.g. right click menu on the figure thumbnail.
Today Creo View does not show / the Creo View Adapter does not convert Textures and Appearance States used in Combined States. I think in terms of MBD, this is crucial feature which is currently missing.
Currently using Creo View (7.1) I can open a sheet metal blank model (flat pattern), take a 2D section thru it, and Save the section as a 2D DXF. However, all circles and arcs are approximated (corded, see below). Our laser cutter software will not import this type of geometry. This is trying to import into Radan (radan.com). If this would work it would eliminate the arduous task of creating a Creo Parametric drawing, adding a view of the blank, and Save As a DXF simply to generate a laser cutter usable DXF. This would also enable the laser programmers to generate a usable DXF from any CAD tool blank that was published in Windchill.
This is a request to display security markings in Creo View exactly the same way that they are displayed in Creo Parametric. When security markings are defined in Creo Parametric at the component, sub-assembly, and top-assembly levels, the security markings are FROM ALL LEVELS are displayed Creo View. The lower-level security markings bleed through to top assembly. And there's no ability in Creo View to control (filter) what is displayed. That's bad. This bad behavior is not seen in Creo Parametric. The security markings can be controlled so you don't get the bleed-through. The combination states look fine and you can control what you want to see. This is yet another aspect in getting Creo View to display WYSIWYG from Creo Parametric.
In Creo View, PTC has two ways to identify components using "Search" or "Find" in the MCAD version. Find will Highlight the models in the product structure or model tree. Search will List the objects but requires 2 additional steps to highlight components in the model tree. Vote for this idea to enhance Search with "Find, list and highlight parts by attribute" to eliminate two steps for highlighting components in product structure. (reference bottom two pictures) Reference PTC Case 15896347 for more information These are the steps I want to eliminate with this enhancement.
Currently a summarized item list (P/N, Item #, Qty) is available in Creo Illustrate. However, the Item list is not viewable when published to Creo View. Creo View is how our manufacturing views engineering illustrations, but the item list is unavailable. As such, the item numbers in the illustration are meaningless to the end user. Please make the Item List visible in Creo View.
As seen in a previous post, there is the lack of parametric way to scale objects. We can use an option to globally scale a part, in a non parametric way, or we could use the warp features to scale in a parametric way, but which could distort the surfaces of a model, and which does not allow to parametrically scale sketches with imported geometry, or sketches that have splines with non-dimensioned nodes. I suggest that the "Move / Copy" general transformation tools, which currently only allow to move or rotate objects, that there should be added the option to also Scale objects, and that would also let to (move, rotate, or) scale skeches (Giving a copy of an original sketch, with the geometry scaled up or down), after picking a scale center. Also, there should be the option to make some general transformations, using a source coordsys and a target coordsys. Please see the attached image:
We should not have to enter alt codes which are non-intuitive, must be memorized (or slow), and unstable (often font dependent): ≤ "less than or equal to" ≥ "greater than or equal to" And less commonly: ≠ "Not equal to" ≈ "Approximately" Greek Letters Perhaps a good way to handle this is by opening MS Word and looking at the symbols used there and how they are organized and mimic use that as your starting point. Folks, please add whatever characters to the comments below that you would like to see that I haven't mentioned here. Add Here in Creo. Could even have extended menu options.
When configuring ModelCHECK, some list values allow for wildcards / placeholders like: * — Any number of characters ? — One character (numerical, alphabetical, or symbol) # — One numerical character $ — One string character but these cannot be used when checking for unwanted layers: PRT_LAYER_UNWANTED [layer]ASM_LAYER_UNWANTED [layer]DRW_LAYER_UNWANTED [layer] Allowing to use placeholders like # in the check file would make ModelCHECK much more aligned with itself and be useful because the admin would not need to explicitly list all possible layer names that are not allowed. This should also be allowed for other unwanted... checks and when using external list files for them.
When a datum plane lose his geometry reference, Creo doesn't highligth the problem. Creo just keep the datum plane as a "dead geometry". Nota : I use Creo 7.0.2 For me it is an important problem because, often, when I make modification in my 3D model I remove some geometry. Recently, I discovered in a prototype that a clip didn't have the good localisation because the plane who pilots his localisation isn't up to date because of this problem. For example, in the case of the image above, you can see that the datum plane "debut_guidage" (I'm french) seems to be normal but when you open the editor of this function, you can see that the reference is consummed. It is real, the reference is consummed by the function "Enlevement 4" but as you can see Creo doesn't warn us about the problem. I called the PTC assistance, they didn't find a way to answer to this problematic and they suggested me to make a proposition here. Nota : I observe that the function Round also
It would be useful to make bodies a category when defining component flexibility in a part model. Currently you can add features so you have to create a delete body feature, and add that feature to the flexibility on the part when used in an assembly. The results in a confusing logic of suppressing that feature to show the body, and resuming the feature to hide the body.
In order to have surface finish machine readable the surface finish is needed as an attribute attached to the surface or as a surface attribute itself, e.g. like color. Therefore a separate menu similar to the model appearance editor, but for surface finishes would be beneficial. Currently there exist workarounds, like using colors instead of surface finish and use a mapping table. But this is no solution. So to be prepared for the future of MBD this is a necessary step.
There is no possibility to round a parameter that is used in a variable in a symbol. It would be beneficial to have a possibility to display a rounded parameter without using the brackets [.2] or the workaround with a seperate relation to calculate a rounded version of the parameter.
There is a checkbox when creating a Mass Properties feature to add a point or coordinate system at the CG. When PTC changed the licensing packages, we found out the hard way that this basic mass properties feature requires the BMX (Behavioral Modeling Extension) license. BMX described by PTC: "rapidly optimize geometry to solve for design goals and engineering criteria". So it's an iterative solver, and should not be required for basic mass properties functions that are in the mass properties interface. There is a needlessly complex workaround proposed by PTC (https://www.ptc.com/en/support/article/CS73023😞 Create Mass Properties analysis feature with XCOG, YCOG and ZCOG parameters Gather XCOG, YCOG and ZCOG local parameters values from RMB click to Mass Properties analysis feature from Model Tree; Info > Feature Create Datum Coordinate Syste
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.