Recently active
Where can I download this tool? I have searched everywhere and can't seem to find it. The furthest I have gotten is: ENGINEERING.com | File Downloads but when you launch the installation launcher it asks for a password... I can't find it anywhere else. Any ideas?
1. What product and version are you running?Creo Elements Direct Drafting 20.6 and 20.82. What is the problem?It is not possible to set the compression for TIF (TIFF) files to CCITT Gruppe 43. Are you using a workaround? If yes, please describe it.Yes - third party application4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Since we use TIFF for long-term archiving, file size must be minimized. CCITT Group 4 is generally considered an excellent standard for TIFF compression.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Unnecessary storage space of millions of files
Creo VB API Type Library for Creo Parametric 8.0.0.0 Version 1.0Creo Parametric 9.0.0.2 The Creo API call toIpfcBaseSession m_session; m_session.ImportNewModel(filePath, (int)EpfcNewModelImportType.EpfcIMPORT_NEW_STEP, (int)EpfcModelType.EpfcMDL_ASSEMBLY, "temp", null);does not match the importing that I did by hand. I get the following error message (repeated for each feature as it tries to import the file, there are 155 features/bodies in the step file) which doesn't happen when I import the step by hand."Warning: Design intent is unclear in FEATURE_155. Use Geometry Checks command on the Tools Tab in Part mode for more information." Why does this method check design intent when opening the file through the UI doesn't? Full use case: I'd like to use Creo to apply boolean operations to STEP bodies. I've added all of these bodies to a single STEP file and would like to import it into Creo via the COM API using C#.Before getting into the code, I've conf
Just to start off, I do not believe this to be a bug or anything to do with Windchill, just that we noticed in the workspace browser. The user had changed one of their displays to something other than 100%. After that, the creo embedded browser started acting strange. The user reported that they could not click on the buttons on the toolbar, nothing was happening. This also might be related to multiple monitors, dragging the Creo session to another screen after the scale was changed to something other than 100%. Here is what I noticed: If you put your mouse over the icon, nothing. If you hovered your mouse lower and slightly right, the icon highlighted and you can click that empty space and the icon activates. Weird. Thanks to @Chris3 for cluing us in. I wanted to document for others since I could not find this in the support knowledge base. Returning to 100% and restarting Creo seemed to resolve the issue. Kind of makes sense that something gets thrown off. Note the
1. Describe the Problem Creo only supports inserting outdated barcodes and does not support inserting images via API. 2. Are you using a workaround?We use an external library to generate a QR CODE in PNG format. Then, we use AutoCAD's lisp or script to insert the QR CODE image.3. What is the use case for your organization?Inserting QR codes into drawings is necessary for reasons such as improving information accessibility, increasing field work efficiency, and facilitating data management.4. What impact does this problem currently have on your organization?Subcontractors or vendors using Creo must meet the parent company's security requirements for drawings to collaborate. Failure to manage drawing information using QR codes can result in disadvantages. This policy could lead to a loss of market share to other 3D software solutions that support QR code generation.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View Lite 9.1.0.02. What is the problem?When a user enters an incorrect password, Creo View abruptly exits with no indication of what went wrong. Users then assume Creo View just doesn't work on their computer and give up trying to use it.3. Are you using a workaround? If yes, please describe it.no4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.My idea is that Creo View would tell users when they enter incorrect credentials. Users can then try again or request a password reset from the admin.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Many users are giving up on Creo View and instead asking other employees to do things like print out drawings for them. I have no estimate o
Hello, we would appreciate a new option how to get rid of annoying prompt and "always open new session" or "always add to current session". Our users are tired to pick one of it. Prompt can stay there optional for people who likes clicking everytime...
Background: In our company we use CreoView as our main engineering 3D viewer, used by very many different functions. This tool is used by all our engineers when viewing and analyzing product data models (thousands of users). In CreoView our engineers generate value added data by creating annotation-sets, views, coloring, positioning of parts, etc. A very typical use is to subdivide the large product model into views for the steps to perform in various operations (Operations/Aftermarket etc.) and the Engineers position data and assign colors to highlight actions to use in the next step of the process. An important aspect here is the ability to filter and subdivide/group the model using metadata (function group etc.) That works well in CreoView MCAD but not in Creo Illustrate, especially not in the EBOM. We are now moving hundreds of users from another tool with these capabilities into CreoView and Creo Illustrate. We would like to have a workflow where the en
A common need when doing Technical Illustration for large vehicles is to add missing parts to the model as in many cases the CAD models are not complete (typical example: only one bolt in a wheel hub instead of all 8-12). For this reason there is a need to clone parts in the EBOM and position those. The current workaround for this to reimport the model but as Creo Illustrate stops importing the same model twice and models are big a lot of tweaking has to take place (renaming the file or opening in Creo View and performing Save As Selected to reduce the data being imported, etc.). Importing a model twice is also a common use case for tool models that are being used in the scene. Thus, the proposal is to:1. enable cloning parts in the EBOM into the SBOM as instances2. removing the limitation on importing the same file twice - Creo Illustrate should be able to assign different IDs to the two files instead
Hola,we need to see info when Creo license was originally bought in License Management.Now PTC/License Management/Advanced search shows only "Support end date".Add "Contract start date" as well to keep us informed when license was bought/subscribed for a first time.
Issue - Preferences for users in Creo View have highest priority from the user_prefs.xml file over the admin_prefs.xml and server_prefs.xml file. An Admin can force a setting into the users session using the "lock" functionality, however the user is unable to toggle a locked setting in session. In our specific use case, we just started publishing Datum Planes into our Creo View files and the user's working with these files in Creo Parametric have datum planes display on by default. We want to enable this same workflow in Creo View of showing datum planes when loading the assembly. Workaround - The workaround from PTC is to remove/delete the user_prefs.xml file which is not desirable because we want the user to keep personal preferences. Requested idea - Add ability for Admins to push out preferences after user has toggled setting and updating the user_prefs.xml file while at the same time enabling the user to toggle the preference if desired. My
Alternative part names are very useful in Creo View and Creo Illustrate sBom. They are disabled in eBom.When the user has to compare the structure for some change is very difficult to understand what are the parts in eBom because they have only the file name (in our environment it is autogenerated - view screenshot).Thanks
In Illustrate 7.1/8.0, when publishing a Creo View 3D file from Creo Illustrate and opening it in Creo View the user interface is adapted to some kind of simplified "Illustrate" ribbon with Go to Figure and Light Scenes. However, commonly used MCAD features like Find and Search (with control of the attributes to search in and queries to use) are no longer available - they become enabled when the Default viewable is selected, but then both the data specific to the figure and any state changes (positions, colors, etc) disappear. PTC Support says (C16133183) this behavior is working as designed: There is no option to have the tools available for Models (when selecting default or empty views) to figures, when selecting a figure the Find tool (find, search and quick search) disappears from the ribbon. Proposal 1: enable all Creo View (MCAD) features to work for a Figure View, e.g. through a option and put the Figure specific functions into a toolbar
Hello everyone, I work in a manufacturing company. We make machines for the sheet-metal working.We've just upgraded to Illustrate 8.0 and I've gladly noticed the introduction of the Administration Tool.As further step I create this post because I think an added value to the tool is an editor of custom light scenes.To make professional illustrations, in some cases, the default light scenes are not enough. And also editing the default ones by just the 3 sliders isn't enough.We're editing the lightscenes.xml because, depending on the topic which we're creating pictures for, having different light angles, different scene/view settings, maybe also light colors makes a huge difference. For example when making a detailed view of a particular is useful to have light from the view perspective.When you're creating a view of the whole machine, instead, it's nicer to have lights from above and one of the sides. Working only with the xml file takes a lot of time because it means "set ->
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.PTC partner, providing services on Arbortext, Creo Illustrate, Creo Parametric, Vuforia Studio, Thingworx, and Windchill 2. What product and version are you currently running?Creo Illustrate 8.13. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Working with 3D models in Creo Illustrate can be frustrating and tedious because the rotation feature (middle mouse/wheel click) works in a very unusual and counter-intuitive way. I would very much prefer it if rotating the model in Creo Illustrate worked the way it does in Creo Parametric. Rotating is Creo Illustrate has the following annoyances:a) Most of the time there is a delay, sometimes fairly large, between when I start moving the mouse and when the model actually shows rotation. There are times when I am trying to rotate the model, and I have to d
When creating a Figure in Creo Illustrate, is it possible for the Figure name to automatically inherit the name of the part in the SBOM?It would be appreciated for voting if anyone has such requirement.
While creating a mirror of a part for our MBD project following issues were observed: Issues: 1.If I am mirroring a part, with dependency and without features, which have annotations then the mirrored part will not have all the annotations which the reference part have. Also the mirror part will not have the start part which is used for the reference parent part. So overall MBD information which parent part have will not get reflected in the mirrored part. 2.If I am mirroring a part with features then all MBD information get reflected to the mirrored part. In this case I can also generate annotation required for MBD. But the major issue I observed the dependency breaks while mirroring the part with features. This will become difficult and time consuming to make changes in both parts accordingly. 3.For both the above cases if I am mirroring a part then only FRONT PLANE is the symmetry reference plane. So if any user want to mirror a part with reference of other plane then it would not b
Although having set "FILE_OPEN PREVIEW DEFAULT COLLAPSED", the program after a while automatically re-proposes the preview window in the file open window. Looking at the behavior of the program, it seems that it is interfering with the appearance of the model preview pop-up in the model tree. Try this test procedure:1- I close the preview in the open window for the umpteenth time.2- Until I see a model preview popup in the model tree, the preview in the open window does not appear again, if I display a preview popup in the tree, the preview reappears in the open window ... That's it, I have encountered this behavior in both Creo 2.0 M250 and Creo 8.0.0.0. Hope you fix it soon !!!Thanks
Add possibility to activate/deactivate upper-level cross-section when working with active part inside assembly.
When applying the topdown approach for machine design and their variations, it's often the case that it starts like this. A general skeleton is made Different datum features/coordinate systems are made to indicate the position of seperate modules. A Family table is made that has different values for the position of those modules (f.e. larger machines have some components further from eachother). If you were to rename a datum feature (point or csys) in the main skeleton and you want this name to be updated in the instances, a normal regenerate won't work, it has to be done by an edit definition. In order to avoid forgetting or overlooking some instances we'd like to see creo improved so the renamed features get their name updated by the regenerate action.
Hello,The addition of a config.pro option "Lock Scale" on Sketch > Modify Dimensions would be an important enhancement on display cross sections.Thank youRegardsLuis
I would like to see an option to remove a reference in the Edit References tool. Many times I make changes to a part model that removes references for a later feature that does not have a replacement. I would like to be able to use Edit References to replace and/or remove lost references without needing to edit definition.
In Creo Parametric, when creating the AR model, it would be useful to already see the 3D annotations (MDB)
Currently when using a Material Directory in Creo (tested in 4.0) if you have multiple sub-folders the search in the window does not search within the sub-folders. With many material files of differing types it's beneficial to use sub-folders. The search also appears to only search on the filename, which limits the search capability. It would be beneficial to allow searching on filename, name, description, and user defined attributes at a minimum.
With modelcheck, we can easily add parameters and relations to pass mass properties to Windchill. For instance PRT_PARAMETER MASS REAL PRT_PARAMETER MASS NONE EQ PDM PRT_RELATION MASS=PRO_MP_MASS The problem is that WindChill is being configured with units (as it should be). If a part does NOT have their relations set to be unit sensitive, the parameter generated will not have a unit. When you try to check-in this model, the Windchill page will have an error. If modelcheck can automatically update the relations to be unit sensitive, before it does any relation checks, adds relations or parameters, that would drastically help us with legacy models from the last 30 years. That would require a 'check' for modelupdate to make those changes. Which means, we would have a check to see if the unit sensitivity is On/Off. Or, we could get the same results if the below capabilities are added to Modelcheck Add parameters with units Check for parameters with incorrect units A
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.