Recently active
Currently we need to scroll for in front of the Group triangle: I vote up for improvement to just by double-click on the left margin below triangle will collapse this group without scrolling for the triangle. This habit is available curentlu in e.g. Excel, where you need to click on the line:
Currently even in Creo 4.0 I see missing direct edit definition under RMB context menu for Sweep feature - it is the time in my eyes to fix it it should look like for example in Extrude feature:i use customise and add missing button, but this need improvement because the button is not working at all and user can only edit dimension, not definition of the sketch...Please hear my voice here
add open base for copy feature when done in context of an assembly as outside geometry. Also the icon should be different for outer copy in my eyes:
Hi, I'm currently trying to make the environment of PTC Creo look pretty and I have been able to modify quite a few things. Still, I am a bit annoyed that I cannot change the axis tags colors, positions, and sizes. To me this doesn't represent a very difficult task for the programming (I am not an IT though), and I think this would allow users to get better experience of the PTC Creo softwares. As showned in this photo, there is apparently no workaround for it in the moment : Thanks in advance!
The drawing setup option half_section_line allows to set centerline but its length cannot be changed.I should be possible to change the length of the centerline.
Make the Browse... function easier to use, now it has to be digged out from the 'hidden' menu. Not a big problem, but extra clicking and pointing is annoying as we always use the Browse... and not the other options.
I am aware of the window scale option, but there also needs to be an option for the new window position. When using a large 4K monitor the window always opens in the upper left corner.
It would be good to have a possibility to update an existing drawing during retrieval with the current value of a specific drawing option.E.g. for the drawing option: drawing_text_colorThis option is not applied for existing drawings during retrieval. If there would be a possibility to apply the current value of the option to all drawings that get retrieved in a session it would not be necessary to apply that change manually for every existing drawing. Currently two visual styles (old / new) exist which doesn't makes sense.This could be made by expanding the currently available functionality that can be applied in config.sup by the new one (marked red) in the same place:enable_auto_drawing_update yesauto_drawing_update_command delete_erased_axesauto_drawing_update_command delete_erased_dimensionsauto_drawing_update <SPR number>auto_drawing_update <SPR number>auto_drawing_update <SPR number>auto_drawing_update_option drawing_text_colorauto_drawing_update_option &
It would be nice to insert jog on a radius, diameter and chamfer dimensions, so dimension is link to model. There is somewhat a work around, which is to create a note, but there is a bug. There are other things I can do, but it is a hassle. Please also see my post "It would be nice to insert jog on a radius dimension, so dimension is link to model."in PTC community.
Would like to be able to open a drawing by right-clicking on the desired part, either in the model tree or from the assembly that's open.
When we create a Drawnig with DXF,In a message box, we can set the colors of the curves If we import dxf in part, we do not have this dialog box to easily change the colors of curves.We must select the curves to change their properties (if there are a lot entity, it is not easy and very long) :Workarounds: Search Tool Workaround: Click the Search Tool iconSelect 3D Curves as Look for and Look bySelect All under History tabClick Find Now andSelect the desired curvesClose Search Tool WindowRMB in the graphics area and select PropertiesBox Selection Workaround: Edit Definition of the Import FeatureClick Import Data Doctor (IDD) iconSelect Curves in the Smart FilterDrag a selection box around th
It should be possible to search for a Clash analysis in an assembly in Creo Elements Direct, e.g. over Search & Filters -> Object Type = Clash analyis . It is possible to search over ModelManager ClassName= CLASH_ANALYSIS, but it is not possible to search over Modeling
Möglichkeit eine Skizze mit zwei editierbaren Oberflächensymbolen erstellen, welche über die Vorlagenliste auswählbar ist.Ziel ist dass beide Symbole mit der Funktion "Symbol ändern" nach der Platzierung in der Zeichnung geändert werden können.
Allow a curve to be completely removed (i.e. similar to the "remove" command for surfaces with "leave open" option checked).BackgroundModel size in parts and view sizes in drawings are dependent on geometry such as curves. If a curve is created in the part or pulled in from a copy geometry feature and exists completely outside of the desired model envelope the curve will undesirably drive accuracy, view size, etc. A trim can be used on curves that pass through the desired model envelope but it cannot completely remove a curve when the curve lies outside the desired model bounding size. This tool exists for surfaces, it should be extended to include curves as well.WorkaroundCreate a mirror of the curve geometry about a reference that places the mirror into the desired model bounds and use the "hide original geometry" option. Then the mirrored curve can be trimmed to within the model bounds as desired. It works, but is a cumbersome workaround.
The layer tree has limited functionality when a floating/detached layer or model tree is used.BackgroundWhen creating copy geometry features from other parts, the user must select geometry in the popup graphics window. If the geometry is hidden you can select the layer tree option and the layer tree will split into two sections: one for the target model and another for the originating model from where the original geometry can be unhidden. However, if the user has the option for a floating model or layer tree, the layer tree will not split into two sections to allow them to unhide layers and the copy geometry feature must be aborted.WorkaroundUse both a floating model tree and a floating layer tree and add the layers button to the quick access toolbar. When selecting geometry for the copy geom feature, click the layers button and a new layer tree will pop up for the originating model. This does not work when the model tree is detached and the layer tree is attac
Set datums cannot be displayed on drawings of parts when the set datums exists in the originating model of an inheritance feature. If GTOLs are created using these set datums in the part with the inheritance feature, the GTOL will display properly in the feature reference frame but the datums on the part cannot be displayed. Annotations work but set datums cannot be displayed. You also cannot create a set datum of the same name in the target model because creo recognizes the name is already in use.
What does it mean submodeling in FEM: Submodeling is a finite element technique used to get more accurate results in a region of your model. Often in finite element analysis, the finite element mesh may be too coarse to produce satisfactory results in a region of interest, such as a stress concentration region. The results away from this region, however, may be adequate. To obtain more accurate results in such a region, you have two options: Re-analyze the entire model with greater mesh refinement (Ex. If in a 100.000 solid elements welded structure there's the need to better analyze a critical weld, actually the only action a Simulate user can do is to refine the mesh locally and re-run the whole model with a huge waste of time). Use submodeling technique to generate an independent, more finely meshed model of only the region of interest and analyze it (Impossible for a Simulate user so far). Submodeling is also known as the cut-boundary displacement method or
Hello together,I'm admin for the Creo configuration & customization in our department.It's really annoying to set up the single index cards for the areas of assembly, part, activated part in assembly, sheetmetal and drawing.I want to set up a single card for our engineers with the only commands they need, made out of mapkeys. But I have to integrate changes for about 5 areas...I would be really happy if you could integrate the feature to copy index cards from already existing areas for the others, that would be less effort for me in future ;-).Best regardsPhilipp GeisslerTE Connectivity
When query selecting on right mouse button you can go past the one you want to select it would be nice to reverse direction of query to select the one you have just past
Please add the ability to select Simulate Features in a Model or Assembly and allow you to Right Click on them and select Locate In Model Tree. The Simulate feature trees collapse regularly and its very time consuming to expand the model tree and find simulate features in an complex assembly. One should be allowed to select a fastener or contract region from the assembly and right click and have the software tell you where in the model tree it exists so you can quickly edit or suppress one or more of them. Thanks, Don Anderson
Dear friends,I think currently we can not simulate hose like the way our mechanism work in CreO. So I am creating product idea for the same.Thanks,Jitu
I would like the scale operation to show up in the model tree.At present there is no indication to show that a scale operation as been carried out.This could lead to problems if several colleagues work on a model file. Also the scale operation cannot be altered or undone if an incorrect scale factor is applied.Kind RegardsJohn Simpson
Required inbuilt function to put 1/4 as ¼ in creo drawing.At present we are using ASCII character code Alt+0188 to do this.Same is required for 1/2, 3/4.It is available in windows character map and in Auto CAD also (auto stack up function)
Bring back arrow flipping while placing dimensions. Like it has been in previous revisions of Creo/Pro/E. To have to get out of the dimensioning and reselect it is a nuisance and extra steps. The workflow was better while placing the dimensions to flip the arrows before committing to it. Now I find myself having to create dimensions and then going back to correct arrow locations, which is a pain.Please change it back.
aggiungere la funzione di affiancare due fogli in un Drawing
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.