Recently active
Currently, within the Windchill/Modeling integration, there's only the functions sd-uwgm-element-exists and sd-uwgm-element-load.These functions accept only a filename.Because of this, these functions always load the latest version of your model in Modeling, the latest version you have access to more precisely.It could be handy if you could specify an exact model, by having a function that can accept Model Number and Model Revision (and optional Iteration).
If I can use punch and stamp on a face part, I should be able to use section as well.
When moving or modifying a 3D splines, there should be a way to force the command to snap to an interpolation point. Now you can only snap to end points
Creo Parametric has this
Need to exchange with these applications for advanced rendering.
Edit Camera saves view settings, but they are not persistent between sessions. It would be helpful to have a way to have some camera settings saved between sessions so that similar parts can be viewed identically between sessions.
Support T-Spline surfaces and Sub-D surfaces.
Unite Technology: Open Solid Edge functionality availability.Currently Creo > File > Open of a Solid Edge file (*.par or *.psm or *.asm for instance) proposes only "Import" option.The enhancement request is to have OPEN instead the IMPORT option (please refer to the 3rd page Unite Technology document).I'm asking this enhancement because this functionality will leverage us to move to Creo in a more smooth and efficient way.It will allow us to incorporate Solid Edge assemblies directly into Creo design and then convert data as needed and when needed. This is a key functionality to easily re-use the legacy data.Best Regards,Luca TonelliWhirlpool - Indesit
Creo Parametric 3 uses almost a quite white user interface. It is possible to change only colour of background of graphic window but not background of ribbon menu, dialogue windows or menu manager.Will be possible to enable to change colour of background of ribbon menu, dialogue windows or menu manager to get more contrast, synoptic, ergonomic and nicer user's interface ?Using of some darker colour or any optional colour would be good - see image (comparison with Pro/ENGINEER with better colour scheme as example).@
Why cant i select multiple surfaces when adding axis to models, so show centerlines on drawings. a triangle hole cut, with the rounded corners.. i go to add axis, and have to click axis, then click surface, then middle button, then click off the model in space.. then click axis, then surface, then middle button. i should be able to multi select surfaces to add axis on these features.
we need more default color schemes, light, dark, anything.. also.. why on earth.. would you have dark color scheme, and the show dimenion text be red, on top of black.. rediculous..
when parts are in a big assembly, be able to highlight the part in the view while the balloon is being used. some parts are hidden behind other parts, and highlighting it would allow detailer to find where the part is in the model.
With Creo 3.0 and before the form based Windchill authentication window that is shown by Creo has a fixed sized. As the login form may be bigger as this small window, the window size of the form based authentication window should be customizable e.g. by a config.pro option.See also Windchill help:http://www.ptc.com/cs/help/windchill_hc/wc101_hc/index.jspx?id=WCAdvDepAuth_ConfigAltAuth&action=show
This should be a simple improvement to the drawing functionality.It would help to clarify and simplify an assembly drawing.I'm sure PTC will add this feature next week. Thank you.
Hi..As if we insert cgm file or dxf file in drawing then due to duplicate entities or overlapping entities drawing becomes heavy. and which is difficult to work on complete vehicle drawing.So if we remove / delete overlapping entity then drawing will becomes lighter than earlier and will easy to handle it.Currently, we don't have any facility in creo to delete overlapping / duplicate entities as per PTC Tech support.Regards,Prashant Pandarkar
Bonjour,La société ou je suis en poste, travaille énormément avec des Bureaux d'études en architecture.Nos clients nous demandent de plus en plus, de pouvoir intégrer nous pièces et assemblage 3ddans leurs conceptions. Creo génère des formats .prt et .asm, alors que Revit génère des formats.rfa. Actuellemnt Creo ne peut pas exporter ce type de format, je pense que dans avenir proche,il serait judicieux que les logiciel de 3d comme Creo puissent échanger avec des logicielsd'architecture.En attendant que Creo puisse exporter le format .rfa, existe t'il une astuce, ou un convertisseurpour pouvoir exporter les .prt, .asm en .rfa.Merci par avance à toute vos réponses, et surtout à votre compréhension cernant mon problème.Cordialement.
I am posting this request that I would like to be able to change the reference point of placement of a table, when inserting it by "Table From File"When creating a new table by "Insert Table",the reference point of placement is decided according to the direction of table.If inserting it from a *.tbl file, it seems like that the reference point of placement is decided from the setting of original table.However, after changing the direction from Table Properties and saving it as a new *.tbl file, the reference point is not able to follow the changing of direction.Therefore, I have to create a new table with desired direction again.Please check the attached file, which direction is "Rightward and Descending", and I want to place it from the point at the right and upper side.
Everytime you add a general view in a drw you obtain by default all the reference planes, surface finish and geometric tolerances of the asm.This is annoying: you have to remove them all from the drawing (it takes time when they are thousands...) and then you'll keep probably none.The workaround is to create a layer to hide, but then you loose the "show/erase" functionality.Please add a config option where you can change this behaviour.
If you scroll down in the menu tree to find a feature/component when you go into relations the menu tree scrolls back to the top. This is very frustrating, I scrolled down to find what I wanted to write relations on then I have to go find again. Please fix, it did not work like that in Wildfire 4.0
Now it's impossible to show safety factor on a surface of model in post processor of Creo Simulate. Of course you can calculate it but it's nonvisually. I will give an example what i mean (the picture from Ansys). In my understanding it's so easy to realise in Creo Simulate, please add this functionality.
From time to time we put MIN or MAX dimensions on drawings, for example an included angle where the radius cannot exceed a certain value but can be as small as the fabricator would like. The issue is that we want to keep the model at nominal, and don't want to change the model to be our MAX or MIN, especially since most of our suppliers build tooling off the model (and may or may not always look at the prints early in the phases). We'd like to find an easy way to show ONLY the MIN or MAX but not both. I learned from a PTC ticket that this is not an available feature in Creo currently. I'd like to see these options in the drop down in "Tolerance Mode" section of the Dimension Properties: Show MAX only Show MIN only This way, you can still define the limits but only show one or the other, to keep the drawing cleaner.
existing issue: 1. hole table update, this function is very cumbersome, every thing is back to default when you update table, include merged cell ,decimal places, lable position . 2. hole table cannot update automatically I want to know why there is no improvment from WF to CREO 3.purpose: you can reference SolidWorks 2016 Hole table ,this is perpect.if can use excel type table is very good.this is the table before update.this is the updated tableeverything back to default .
I've been noticing lately that there isn't great support, mostly in terms of the Options, for companies where the same users work in Metric and English. These users don't want to run mapkeys each time they switch between working in Metric and working in English. Furthermore, even if they are willing, they would likely forget and then mess up on the models they are currently working on.The below two options just became an issue for us this past week. I'm sure there are many more that I'll add over time. The main request is for PTC to come up with a newer option structure that can help support these options either at the model/format level OR be robust enough in the config.pro/supdrawing_setup_filedefault_dec_places
Right now in Creo direct modeling 19 there is a option to go from the structure browser to windchill. the "View information" button. This action redirects you to the document information in windchill.It would be an enhancement if there could be a button added when right-click - "INFO PART" , to go directly to the related part of that document.This would save us a lot of time because then we don't always have to go to the document first to see the info we need.Regards,Bram
Due to the many issues that occur from orphaned dependencies, especially when doing a SAVE-AS to an assembly that has those orphaned dependencies, it would be great to have better support for this:A 'Break All' option to break them all at onceShift to select multiple references at once and then RMC to break themReporting in the Notification Center when they are created or when models have themModelCheck reporting and ModelUpdate to break them
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.