Recently active
Actualy, it is not possible to merge 3D curves entities from an import with IDD.http://support.ptc.com/cs/help/creo_hc/creo20_hc/index.jspx?id=To_Merge_Two_Homogeneous_Curves&action=showThe only workaround is to use old feature # Curve from file..... with old UI !And in this case, interface file must be IGES !It would be great to have same functionnalities as # Curve from file, in IDD to merge curves imported from IGS,STEP,DXF...Curve from file is not in the ribbon and propose an old UI with Proe menus.....Thanks
Measuring a distance between two surfacesThe current CREO distance Analysis tool behavior: The result display jumps always to a a norner or to the calculated Center of the first surface feature. Shown as "1" in the pictureThe behavior should be: The Position of the Analysis should reference the point position selected-first, shown as "2" in the picture.With reference to another issue: The result Icon should be placed close to the Dimension line https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS99635
I work in the medical device industry where we design and develop implants for spinal fusion applications. This often involves developing asymmetric buttress type threads for screws that are fixated in the bone. It would be nice to be able to create a datum curve through a cross section and then be able to offset that whole curve in one operation both in the positive and negative direction in order to quickly create a profile overlay to measure threads to ensure they are within in specification. Thread overlays are very quick and easy to use in order to check the form on the thread rather than trying to measure discreet dimensions and interpreting tangent transitions say from a radius to a back angled surface of the thread. At one point there was a function to create a datum curve through the intersection of a cross section but there was not much that could be done with it. I know there may be issues with some curves created at splines and offsetting may be challenging for the math? Bu
It would be usefull for the user take measures while defining a cross section (as in Creo View). Also an export command would be usefull (placed in the RMB context menu) as shown in the following picture.
The User now can't redefine an Explode State and change the sequence defined because it is not tracked anywhere. It would be interesting in order to generate and manage movies that come from an explode sequence. If you make mistakes, now it's impossible to fix it; you must delete the Explode State and do it again.
It should be nice to have the possibility to upload for a part more than one general tolerance table. This happens for example in a molded part where dimensions measured just on core geometry (or just on cavity geometry) have a different linear tolerances from dimensions that span core and cavity geometry.
When using the commands which use the 2D CoPilot and catching points on a 3D model, the edges and vertices on the model are projected as temporary construction geometry on the active workplane. But if the workplane is off of the part, it is not obvious if you are selecting the right edge or vertex.But with the old, "classic" commands there was feedback on the model, so there was no question.
I tried creating a mapkey that reads in a relation file. However, if the file name was changed from lowercase to uppercase or a mix, then it wouldn't work. When reading files, mapkeys should not be case sensitive. This is in respect to case 12953320
Actually, is it not possible to create the CL-Data für tailstock and lunette movement over a feature. It´s necessary to write a CL-command in a manual cycle. But with this command there is no visualization during playing the toolpath possible. The idea is to add a feature for those things. For the lunette I think the following actions a necessary: - open- close - change position For the tailstock: - change position - change the head - change position of pinole There must be a possibility to deactivate the output in the CL-Data
In freeform if you split all faces of a ball, it transforms into a (sort of) cube. In other software (i.e. Lightwave 3D metaNURBS) there was a way to split all faces without affecting the underlying generated SubD geometry. It's like when you "elevate" the level from base to level 1, but making the level 1 the new base level.
I would like to be able to modify a relation driven dimension without going to the tools tab, opening the relations dialog box (change the look in to Section when in edit mode), finding the correct relation, then making the change, and returning to what I was doing. Ideally the relation would be shown in place of the dimension and you would be able to change the relation or replace the relation with a number.A simpler approach could, when trying the edit the dimension, open the relation dialog with the relation highlighted. I use relations to drive some dimensions in my part sketches to create the appropriate dimension that can be shown on the drawing and still keep the design intent, such as symmetry or length of thread on boss.
for all other functions where radius is concerned the R is before the dimension. but the bend in a pipe feature the R is placed behind or after the dimension. this is the way is shows in drawings which does not follow ANSI standards and requires manual manipulation
I'd love to have more information displayed in the Creo window banner.Today we get the version and iteration (A.2) and well as the modified status (+).Is it possible to add some of the Workspace status such as "Checked out" or "Locked" , "Out of Date" and "Name Conflict" using Windchill type icons or even using just words? Maybe also that the file is checked out by someone else.I'm just tired of trying to modify a file only to realize that it's locked locally, or going to checkin a modified file and finding out I don't have it checked out, or going to check out a file and receiving the message that translate into "you already have it checked out dummy".And while I'm at it, How can I fix the Windchill browser window scroll so it doesn't blank out all the text while scrolling quickly - worst web interface I'm forced to use, hands down.TIA,Scott R
Thicken works to the outside, inside, or split.Extrudes can be extruded in both directions in options.Why can we not create ribs in both directions within one feature?Use-case: 3D printing does not require drafts and enclosed volumes still require ribs for reducing material while maintaining strength.Simple example: Create a rib in an I-Beam where you have two plates that need to be connected with ribs.I know the Rib feature was created for injection molding but plastics manufacturing has gone far beyond traditional capabilities.
Sometimes there are parts/assys which can be used like a symmetric item concerning mounting and function, although they are not really topologically symmetric (e.g. pneumatic cylinders, electric drives etc.).If one could define a user-defined symmetry as a special feature or a special coordinate system added to this item, the built-in mirror function should be able to handle this feature and to re-position it in the (mechanically) correct way instead of creating a mirrored new one.An optional warning may be applied if this happens like when you load a package with containers
Kinder sollten beim Referenzen editieren hervorgehoben werden.Würde die Steuerung wesentlich einfacher gestalten.Im Beispiel sollte die "Bohrung 3" im Modell hervorgehoben werden.
The Creo Parametric config option measure_auto_replace_mode yes can be set which makes the second item chosen in the measure dialog default to "replace" so that further measurements can be made without the control key simply by clicking new references. This operates much like the old WF measure tool where you pick a base entity and then you can measure from it to many other items.However, this option only applies to the distance, angle and transform measure tools, not to the Summary tool. Measure > Summary is the default tool and arguably the most useful, having this option apply here as well (or alternatively a dedicated option for the summary tool) would be beneficial.
Hi Everyone, For those that use Creo Simulate on a regular bases, I hope you find this product improvement idea of use. I would like to see Creo Simulate development team Improve and or Add Ability to Copy / Duplicate Load Sets, Loads, Constraints, Forces and Improve Naming and Function Consistency with in this area of Creo Simulate. Problem 1 - You are not able to select a load / force in one load set and copy it into another load set under a new name - You can right click on a load / force and select copy to copy it into memory but you can't do any thing with it from that point Enhancement Request 1 - Give us the ability to paste a load from one load set to another load set under a new load name. - Give us the ability to copy and paste a load from one load set to a new load set that is created on the fly. - Give us the ability to paste a load and or load set from one model /assembly to another model or assembly. Yes, I expect to have to re-select the geomet
Please add the ability for Creo Simulate Screw Fasteners to work with Tapped Hole Lead In Chamfers and Counter Bores. This would prevent the need to remove these chamfers from the model and allow the design to be saved to the PDM system as it was setup for the FEA run. This enhancement would remove in most ways the error message "No contacting surface pair could be automatical AutoGEM"
Please add the ability to open models while in simulate assemblies by selecting them in the main window and using right click to open. How many times have you worked on an assembly where you do not know the model name and it is hidden in the model tree. Give us the same ability that is available in the normal assembly mode. Thanks,Don Anderson
backups Copy the drawing
There are certain operations in Creo from which the only way for a user to escape is to exit the program:Importing a table or format that prompts for parameter creation.Conflicts on save which try to regenerate and verify massive family tables.I'm sure there are others; please add them in the comments.It would be really nice to have an escape command for these situations without having to close Creo and lose work and time having to reload models after restarting.PTC, please add an escape command.
With Creo Parametric we can now dynamically drag a handle and see the 2D section animate. I would like to be able to output the result to a video given a step size or at least a series of png images.
Actually, there is no possibility to use STL-Data to create NC-Sequences in Creo Manufacturing. This would be very nice in combination with simulation tools. Please add this functionality. I referee to case 12967129 Mathias Reiter
I need the ability to make 3D cross sections with any sort of sketch or curve whether it is a straight line or not. Currently you can only make an offset cross section with straight lines. I need to make them with arcs or splines. Currently you can only make zone cross sections with straight/flat surfaces. I need to make them with non-flat/straight surfaces. I can't believe I have to submit a request. Its a cut!
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.