Recently active
add function to retrieve the Layer Rule data, possible api could be:struct pro_layer_rule * ProLayerRule;ProError ProLayerRuleGet( ProLayer *layer, ProLayerRule *p_rule); //get ProLayerRule object from ProLayerProError ProLayerRuleSet( ProLayerRule rule, ProLayer *p_layer); // set ProLayer with ProLayerRuleProError ProLayerRuleDelete( ProLayer *p_layer); //remove rule from layerProError ProLayerRuleIsEnabled( ProLayer *layer, ProBoolean *p_enabled); // get ProLayer rule enabled/disabled statusProError ProLayerRuleEnabledStatusSet( ProLayer * layer, ProBoolean enabled); //set statusProError ProLayerRuleIsAssociative( ProLayerRule rule, ProBoolean * p_is_associative); // get associative statusProError ProLayerRuleAssociativeStatusSet( ProLayer *layer, ProBoolean associative); //set associative statusProError ProLayerRuleIsFromExternalModel( ProLayerRule rule, ProBoolean * p_from_external); // get 'independent' statusProError ProLayerRuleProRuleGet( ProLayerRule layer_rule, ProRule *p_rul
Currently, when borrowing a license from Creo (3, 2 or 1), you can ONLY run a lower version of Creo with the borrowed license. I currently have a customer that is still on std Wildfire 5.0 (correct, not creo elements 5, but std 5). As a business owner of a contract engineering company and user of this software, we should be able to run ANY version of Creo or Wildfire below the license borrowed. For example, if I borrow a Creo3 license, I should and can run all the lower Creo versions, BUT I should also be able to run any of the Wildfire versions. This is currently not the case, and in order to do so, I must WAIT for the license to expire before I can even borrow the license under Wildfire 5. This brings to the second point, why can't we return a borrowed license??? Why must we wait for it to expire??? We should be able to return a borrowed license at any time we desire!!! These 2 items should be corrected for the sake of the users!!!
Itt is possible to create a bend and then change how the bend angle is referenced/dimensioned. For example, when creating a flange wall, the bend angle reference could be changed via the Shape tab > Sketch option. Or when defining a bend feature, one can set from where the bend should be measured from (inside, outside).However; this information cannot be communicated via the bend notes of the flat state as these are automatically created when generating a flat state (flat pattern, unbend).The problem is, that sometimes it is desired to be able to modify the bend note to show the bend refernced from the other side/reference, and currently this is not possible or part of Creo functionality - See https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS147104See example below:It is desired to indicate the 150 degrees (instead of 30 degress) on the drawing for manufacturing purposes::The bend line created on the drawing cannot be modified, unfortunately:The only way to show this is to
SPR2822570 / 1136560 StatusOpenSeverityMediumCreated Date22-MAR-2005DescriptionCreating datum curves programatically. (from file, thru points, x-sec, equation)Affected PlatformAll#4 E4613084Creating datum curves programatically. Being ConsideredVIN JOVANOVIC2005-03-22Not availableCreo Parametric Direct and LayoutPro/TOOLKIT (Wildfire 2.0)SPR 1136560 has been filed to track this enhancement request.
ある解析にて,解析結果ファイルに対して作業ディレクトリディスク使用量が非常に大きくなる現象を確認しました。 作業ディレクトリディスク使用量(キロバイト): 172972032→173GB 結果ファイル:2.81GB一時エンジンファイル(*.tmp)の容量削減を要望します。
When I want to re-order the rows in my BOM table the system does not give me the ability to do that. Example: I have a drawing from an assembly. The assembly has 10 parts. I add a table from "Table -> Quick Table -> bom description up". The items are sorted automatically. Now I want to move only the item 4 up and change the position on item 9. The rest of items would change accordingly. This is not possible in any way. The best would be select the whole row for item 4, press RMB and move the row onto desired position in the BOM table.
There should be the ability to place limits for flexible items, specifically pre-defined flexible items. This would be similar to placing limits on mechanism movements. Most commonly we use this in vendor components that have max/min conditions. Adding limits could also prevent the model from entering an unstable or unrealistic state.Example: If you use flexibility on the length of a spring there is no way to prevent a 0 height spring, or a spring longer than the max length the spring should be stretched to. Here's just a sample idea. Though it would need the ability to have no limit set as well.There are work arounds that others have found (flexible component with limits) but none are strict limits with dialog boxes telling you why you're getting an error and what the range is.
How to have the option add note unchecked by default when creating a standard hole feature in Creo Parametric?
Creo 2 is still widely used, but even with the Interface for UG license it can only open up to NX version 8. This is something that should be updated in later date codes as new versions of NX become available. Same for other applications. As it stands, it appears this functionality in Creo 2 has not been updated since M010. If the feature is going to be useful and continue to be paid for, it needs to support modern versions without the need to upgrade Creo to a version we cannot use, or are not ready to use.UPDATE: The documentation for this is terrible. Apparently the central document for version support is out of date and Creo 2 M150 supports NX 9. So it got updated, but to an out of date version? A better document is CS134024.
The more I try to use Mapkeys, the more I dislike them. VBA in Excel as it's a great tool for repetitive tasks that has ability to link to other programs/databases as needed. PTC implemented a VB API in WF4 so it seems like it's a small jump for them to add VBA support. VBA: Code is less likely to break and easier to build a community of users. Link to outside databases/programs Amazing documentation support from Microsoft and the whole world of VBA users. Record button clicks More robust tool set (for loops, if-then statements, etc) More concise and easier to edit code Most users have a free editor for VBA through Excel Mapkeys: Record button clicks Easy to share with outside contractors through config.pro
Dear PTC,Me and my colleagues would be very happy and satisfied if you add the autosave function to Creo. As far as I know there is no option like this currently in Creo and because of the occasionally fatal errors it would be a time saving function.Thanks!Andras Homonnay
Please add functionality for drop down list to be directly populated with contents from the pro_format_dir.If the browse button can link to the correct directory even in Windchill Library then surely the list can be automatically populated with these formats.
PTC Creo Elements/Direct Modeling - Annotation - text with a triangular form:I want to create a text with a frame in a triangular form.And I want to create the color different from the text.Currently I'm doing a sketch with text and manual geometry.But I would like to make it as a text(see Appendix)
Add config.pro option to set the "Use template" option by default in the new drawing dialog box:
It would be great if we could have a tool for making a work plane between 2 faces/edges/points/planesi have been using creo for over 5 years now and this is something that would speed up my day to day work considerably. i really miss it from my inventor dayslike thisthe process would be something likeclick plane between 2 faces buttonclick on face 1, click on face 2, middle mouse clickcreo would then create a work plane parametrically driven that resided between two faces.the current method ismake a sketch,make a axismake a work plane using the axis and a datum plane ( if possible ) or a different sketch formed axisor make a convoluted udfit just takes too longplease make this a thing
Right now it's generally possible only to set coarser values for Geometric Resolution of a part in Modeling. I can understand why this might be so when there is actual part geometry involved, but if it's an EMPTY PART (no vertices/edges/faces/volume) it should be possible to set the Geometric Resolution to any supported value, e.g. 1e-6mm, even if the part may originally have had a different coarser (larger value) resolution.
In addition to the dialog box below add the ability for the software to identify the components having the issue by highlighting them in the model and expanding them in the model tree.Error - Assembly Failed is of no use to use regarding the error message "The mechanism constraints could not be satisfied"Thanks,Don Anderson
In Wildfire 5.0 there are stories of an "Auto Fix" button within Import Data Doctor. It's been a few years since I've used Wildfire 5.0 but I believe this to be true. I know any sort of automated fix won't fix everything, but it would be nice if there was a functionality to essentially do a repair on all portions of import geometry. One model example I had today, was an import of a parasolid. had 7 bad vertices in geometry check. I did an activate on each component in IDD, Repair, and deactivate. It got the list down to 4 with almost no thinking involved. You might be able to rig up a mapkey to do all this, but why?We get a lot of models from other sources as STEP/IGES/etc. and sometimes they don't come in as solid. Most of our end users don't know how to use IDD. I've used it more than anyone here and I still don't even fully understand how to use it to fix models. We even went to the effort of purchasing an additional tool to help fix these models as well as helping with shrink-wrapp
At Schneider Electric we are making Creo View standard edition available to our Windchill users, but we have no clue of is really using it, and if there are users who could use it without a Windchill license. It would be great to have PTC Performance Advisor for this, and benefit of the feature usage, for example to know if some users requested Creo View MCAD or ECAD licenses but do not use the features that are provided by those licenses.
In Creo3, when rotating notes with fixed incréments (shift), the angle of 5 ° is too small.I would suggest increasing this angle (to 15°) or adding Creo3 config option.With Microsoft Office , the (shift) angle of 15 ° is much more visible when rotating objects.Need option controlling pitch of angle during rotation of Drawing Notes with SHIFT button pressed.Currently it is 5 degrees, whereas Microsoft Office proposes 15 degrees for similar action in their products.
This is an enhancement request to improve the selection tools in the Creo Parametric simplified rep User Interface to highlight components in the tree to take actions against. Currently, it only highlights components in the tree based off the first character in the file name. We want functionality to find obejcts in the tree based off of characters that are common in the middle or the end of the file name. Reference case 12960255 with no current workaruond found by tech support. Similar functionality is designed into the File Open Dialog box as shown in bottom picture. Summary of Request:1) Primary - Highlight objects in the tree structure matching the criteria for common characters residing in the middle or end of the file name.2) Nice to have - automatically filter down the list of objects in the tree similar to File Open functionality.Picture below shows the Creo Parametric Simplified Rep User Interface. Notice how "SKEL" is not highlighting the objects
Please add the ability when creating a surface round to extend the end surfaces x distance each on each side of the round.This would eliminate the need for 2 extend features in the model tree and reduce time to round corners where pro/e not able to produce round transitions.ThanksDon Anderson
In Wildfire I had the option to have 8 default decimal places in the model sketcher, and 3 default decimal places in the drawing. It appears in Creo that option has been disabled. This is causing a large amount of extra work when creating drawings. Now we have to edit every dimension that is created in a drawing just to set the decimal places to 3, since our models need 8 place accuracy. If you use the selection filter and bulk collect the dimensions to change them all at once, you still have to go back and rearrange the dimensions. The bulk collection method also assumes you have all the dimensions needed at that time, which is not likely when you are doing larger drawings (we have many drawings with up to 9 pages). I have spoken with Kyle Tabor at Tristar and Amit Deshpande at PTC and they are aware of the time wasted making drawings this way.
The default view text height and thickness can be controlled by the detail options def_view_text_height and def_view_height_thickness, however there is no option to set the default font style (reference Case 12825374). To increase drawing aesthetics and readability, it is desirable for the section and view letters to have the bold appearance of the "filled" font style:However, without the availability of a mechanism for setting the font style by default, changing the font style is a manual change to the properties for every section/view letter, which is time consuming and error-prone. An option for setting the section/view font to a different style than the default font would improve efficiency and readability of the drawing content.
In Creo Parametric drawing is not possible to make angle dimension on shelf like linear dimension (see picture below).I don't know, may be it contradicts to ISO standards, but in other standards it's allow.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.