Recently active
Users often have to present their models in design reviews that often include managers and non-technical people. It would be great to have a "Presentation Mode" button that automatically optimizes the display for presenting. I can do much with a mapkey but not everything can be accomplished. Here is what a Presentation Mode would include, but not limited to: No In Graphics toolbar (this currently can't be turned off) No Quick Access toolbar No menu tabs No Help toolbar No text in lower left corner for Simplified Reps, Layer States, etc. (currently buried under Secondary Highlight; alternatively Temporary Shade) No Spin Center Pre-selection Highlighting turned off Navigator and Content Viewer collapsed Message Area collapsed Retain ability to display Combined Views in tabs at the bottom of the screen Essentially, it's the Graphics Area only, with the ability to manipulate the model (spin, pan, zoom, etc.). Then either a Function Key, icon, or RMB would allow the user to
Is it possible to create a function which allow to see full scale model on a screen?Usually you can zoom in or out but if I want to see how the real model looks like there is no such option.I understand that the full view is limited to a monitor size; therefore my request is relevant to small parts only.It would be helpful to have a button to change a view to real size (for instance a shaft of 1 inch diameter by 2 inches long is shown on the screen in real dimensions).
Currently there is no way to measure the distance between individual toolpaths.Also you can not measure the distance between the tool path and the geometry.Such functionality is very helpful to program the geometry, and also available in other software packages.I refeer to call 12861291
It should be possible to define parts as virtual parts in a Creo assembly, meaning that the definition of the parts is managed and stored within the assembly file (.ASM) itself instead of an external part file (.PRT)This is very usefull when working with large weldment assembles and there is no requirement to manage the individual parts in terms of Windchill, separate drawings, revision etc.This feature currently exist in Solidworks (together with other features such as multibody parts, weldment assy. etc.)
Would like the ability to add information from a PDF file onto a drawing sheet. Example a customer sends me a drawing in PDF format (they have no other file type). I do some design work that needs a drawing to represent the changes/design along with the customers provided information. If I could import the customers information into my drawing (as draft entities) then I only have one drawing file to manage.
Within style feature be able to mirror an already created curve or surface to capture and analyse the curvature within one feature as being developed.
Turn drawing dimensions unregenerated when the reference is no longer viewable in the drawing. Or at least create an option to make drawing dimensions behave this way.Example of current functionality. Part created with an extrude, create a drawing dimension showing the length of extrude.Next create a second extrude that cuts one of the ends off or add material . Notice how dimension stays YELLOW (Regenerated). Dimension in GREEN shown to show the change.This is a major issue. There's NO indicator for someone cleaning up the drawing to know the 30.000 dimension is wrong. Very easy for parts to be scrapped because of this.Please vote for this idea.
Backing into this request, Using Save As in Workspace there is the ability to Save AS and create a new number for all items in a structure and they all will be in the new structure. Also has the ability Update Parent assembly. And this is great because all of the assembly constraints remain, and annotation remain because it keeps the association of features. However, often times, users will create a copy of a lower level component but not use the above process to keep higher assemblies in line with configuration requirements. I'd like the ability to replace a component in an assy (was was a copy of the original) and have it maintain associations. Replace Un-Related component in Creo is essentially the same as deleting item and replacing, which requires all the work for assy constraints and drawings.
Provide a config option or change the standard to round the secondary unit tolerance rather than truncating.
Bonjour,Pourquoi l'export des nomenclature est limité à 80 caractères ?Serait il possible d'augmenter cette limitation afin de pouvoir exporter tous les paramètres utiles et les éditer dans un tableur.Pour le moment à part faire du copier/coller de plusieurs fichiers pour les assembler, il n'y a pas de solution !Il faudrait améliorer cette fonction !
This is about large assembly's "Save a Copy". In some case, we want to make a copy just only TOP assembly. Currnetly, "Save a Copy" fail when there is un-regenerate model as a component. (CS44975) And we need to make a copy for the model which have a external references.
There are various good reasons to use assembly cuts in your models; and there is often a necessity to use surface regions when setting up a Simulate analysis. Unfortunately, at present this is not possible as I believe surface (and volume) regions must exist at the part level. A method to enable creation of surface regions on a surface resulting from an assembly cut would avoid the need for clumsy work-arounds such as duplicating the assembly cut geometry in each part (thereby losing design intent), or exporting the assembly as a STEP file before re-importing it and analysing it as a 'dumb solid' (thereby losing parametric capabilities).
This window is the bane-of-my-life ... - why oh why cant it remember any options that I select ?Ive probably clicked Show Element Edges a million times, Deformed another million and scaling the same.And this is not just the Display Options tab - the others are just a bad.Also what is with the OK button functionality- if you select OK when editing a window it deletes the window !- if you select OK when copying it does nothing.- OK and Show are in BLUE which suggests you can center click to accept - but NOI don't know who PTC consulted when they reworked the RESULTS interface but it wasn't anyone that uses it - PTC needs to get something sensible going on here
For the Illustrate, trees of the sBOM and the eBOM are displayed parts and assemblies with randam order, if at all their name are named with numbering. Therefore, I am experiencing hardships to find the necessary parts or assembly. So, I want the method of arranging for those trees to displayed parts and assemblies. (ie. arranging in alphabetical order) I think more better that method has be able to arrange in the order of 'assembly' and 'parts' in these trees.
Please give us the option to make Legend values persistent. How many times have you worked on an assembly and wanted to Isolate a component so you can see the stresses, strain's, or displacement completely around the component only to have to re-enter the legend values again? Please make this enhancement available for all analysis types and design studies. Very annoying when you are trying to switch between different load cases for both a component or assembly. Currently if you edit the results window definition the legend values rest to their defaults. Need the option to make the values we type in persistent (non-changing). Verified not in Creo 2 & 3 Thanks, Don Anderson
Hello an all and Mrs of PTC Much of training of PTC Creo Parametric the students ask me about Symmetry Function When we forget to put some function inside symmetry function, you have that delete or cancel symmetry function, and begin of new. It would possible that inside the symmetry function display the functions chosen in model tree and you can add or remove this functions. Thanks for all, Gorka Garcia Consultant Engineer (PLM FEM CAD) Integral Innovations Experts (Partner PTC Spain)
Give users the option of putting the early features in a "header" that remains at the top of the tree when scrolling in a long feature list.Similar to using the "freeze panes" command in MS Excel
In Creo Parametric, to check for interference in an Assembly by considering the upper/lower dimension tolerances of components, it is now NOT possible to select multiple components to make all their dimensions upper /lower bound. It is only possible to select select multiple dimensions one by one which becomes a tedious task in a large assembly.The capability to select component (s) to make all their dimensions upper/lower bound will make the interference analysis of assemblies a much faster and easier task.
The idea is to prepare a default list of hidden layers in a drawing template (for example surfaces and curves).Our drawing layers are independent from the model.Be able to copy the status of the 3D model to take over the management of drawing layers, even if the drawing and 3D layers have the same name. Actually, we define the template with ignore_model_layer_status and draw_layer_overrides_model.We have to uncheck draw_layer_overrides_model to copy the layer status from the 3D.
Be able to define a point on a curve and reference it at a distance of another point.(not along the curve but in a straight line from another point)Actually, it is only possible to give a dimension from a plane or a surface.
Ability to create a feature analysi of Cetol, as it is possible for TAX. With this we can combine simple toleance analysis (TAX) and more complex one (Cetol) But Also use the BMX capabilities to make optimization on the trageted values.
Certain of our users have multiple Windchill logins names for their unique Window login.When launching Creo with our script, it would be very useful to be able to fill the Windchill login window with the choice done in a bat command.
It seems that STEP AP203 edition2 allows 5 different line stylesDotfont and other types of styles would be usefullActually, dotfont line style is exported en solidfont
In the recent past, we have been observing that Delcam (Powermill) is doing good business in the absence of an PTCs Independent CAM solution.End users are convinced on Creo NC packaged with Essentials, but due to the package dependability they opt for Powermill.Generally, as you are aware that sitting locations of Tool Designer is separate from Tool Path Programmer and hence demands for two separate independent solutions.Also, since Delcam packages powershape with powermill in a very attractive costs, customers buy Delcam Powermill with Powershape which also affects Creo Deals.Moreover the Powermill and Powershape works independently and in parallel on two different computers which is very attractive for customers.When Creo was launched, we had a hope of Creo NC shall be an independent App similar to Creo Simulate.I hope in near future, Creo NC shall be an Independent App with very basic feature of FMX/Direct Modelling.Awaiting for your acknowledgement.Regards@Wajid.
Currently you cant save graphs that use edges or curves into templates in Simulate. (CREO3)This creates an enormous amount of down stream work or just a whole bunch of ugliness - measures on arrays of pointsAdditionally when you come to select curves, there is no intent manager - cant intelligently chain or loop curves, just select individual curves - deselecting curves is just as problematic - selection highlight is dumb - highlights unchainable curves which on the next click are rejectedIn closing out the edge selection there are two dialog boxes to navigate - the first box allows default selection of OK with CMB - the second box doesn't have a default selection, it should have OK as defaultThere desperately needs to be improvement in this area - it is a major source of inefficiency for the user
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.