Recently active
When using Unblank option from Line Display tool for tables, there are no indicators for where are lines that were previously blanked, so the use of Unblank turns into a bit of pixel-hunting with hope of clicking near of the blanked line to show it.It'd be much better if, after switching to Unblank mode, currently blanked lines would be shown (for example, as dotted lines or dimmed lines), so the user could easily identify where are blanked lines in table and select them, so they would be displayed again.For exampleCurrent state: no indication where are blanked lines.Proposed change: dotted lines displayed in place of blanked lines, so it's easier to find lines possible to unblank.
If you have a symetric part wher a surface is failed on one site it would be great to be abel to mirror the symetric surface or make a copy of it and be abel to flip it.Today you can only rotate it.
Add options for export importable xlsx in windchill to export all wtpart attributes rather that just the ones that contain something.When a wt part is exported as importable xlsx, only the attributes that have content are exported. This causes issues with uploads because if the missing attribute fields are added to the spreadsheet manually this can mess up the format and cause uploads to fail.
Provide the ability to create shortcuts or hot links directly to other items in the model tree, and then allow these to be placed at the top of the model tree for easy access. Functionality should be similar to the existing "add to footer" capability, but at the top of the model tree instead ("add to header"), and only contain links or shortcuts. (The actual features should not move.) Right clicking on the link should provide the same menus and options as clicking on the feature itself and allow changes to be made to the model without having to locate the parent feature in the model tree. This would greatly improve the ability to quickly make changes to a model without having to understand the entire design intent first. The original designer would be able to make the key controlling features in the model super visible and accessible.This idea is based on the discussion here: shortcuts in the Model Tree for quicker editing
We use coloured shaded views on drawings to indicate where different surface finishes and polishing requirements are applied. As of Creo 2.0 M170 and Creo 3.0 M050, it is now possible to enable drawing views to inherit the current render scene applied on the underlying 3D model. This is great for us because by utilising this new functionality and creating a special Creo scene in the underlying 3D model that only has an ambient light, we are able to create a cartoon style shaded drawing view with no highlights or shadows. Perfect for removing all ambiguity on the drawing.But the problem is that unless we save off the 3D model with the scene applied, every time we re-open the drawing the views revert back to standard shading. We don't really want all of our 3D models opening with the cartoon style shading applied.So my product idea is to include the applied render scene as an additional item when creating a COMBINED VIEW for a part or assembly. This would allow us to choose whether to ap
I would like to have some king of Model manager funcionality. It could work in following way:1) It would be common interface for Parent Child Relation ship, Global reference view, realtions, Geometry check and so forth2) It would all to manage geometry of model in more accurate way. User would be able to create seperate areas in model tree and create extra rules among features inside.3) User would have global control over referencing of features between separate areas of model, to locking or not such capability4) user would have possibilty to created templates with approproate rules inside the model so other users would be pushed to follow them5) user would have possibility to set global links between indicated dimension and features, to set same value among all of them without creating complex and heavy realtionsbelow some ideas how it could work
We have over 320 "details" that can be added to a drawing for further reference of something contained in that drawing. Many of these "details" contain notes with leaders and dimensions. The only way that has been available to make these "details" are to create them as draft groups, place them on their own drawings and add them to the drawing via the "insert, copy from other drawing" command. Also, quite a few of these draft groups have notes in them that need to have text changed to make them drawing specific. Many of the users forget to do that and the variable text functionality of the symbol would alleviate that problem. We would also like to automatically place many these via a drawing template where a specific file location and name of the "detail" can be entered into the template as would be available through the use of a symbol.We would really like to change all these draft groups to symbols, but user defined symbols do not allow the use of dimensions or note leaders in them. I
Provide a global notifier that will fire whenever any kind of direct update is initiated on any model.
Publish list of all ProCmd commands available. Example in trail file: !Command ProCmdEnvShaded was pushed from the software. !%CI Shaded model will be displayed < 0 0.938667 1467 0 0 792 1920 0 0 1080 13 ~ Command `ProCmdDwgNewSheets` !%CISheet number 2 has been added to the drawing. < 0 0.935111 1467 0 0 789 1920 0 0 1080 13 ~ Activate `main_dlg_cur` `main_dlg_cur` ~ Command `ProCmdDwgNewSheets` !%CISheet number 3 has been added to the drawing. ~ Command `ProCmdDrwModels` ~ Command `ProCmdFileInsert` ~ Command `ProCmdModelSave`
We can get only view names but model view name cannot be obtained currently through toolkit apis.
Dear all,Those "Home point" and "From point" are for turret rotate safety area. So that, those points are very important. if users forgot to set up those points, then when tool change may cause turret collision the part or chuck. If that have a limit mechanism to remind users to set up it that can avoid collision event. (like yellow color of parameter dialog window)Have a nice day!!Mark Rao
Dear all, I have set up "Home point" and "From point" at “Operation” dialog window, but those points can’t automatically copy to each sequence for start and end position. For the reason, users need to select the start point and the end point every time when they create sequence. If PTC can resolve it then users can save some steps from doing the same thing, because the setting of start and end points is very important in lathing function.Have a nice day!!Mark Rao
When the command GROUP is used to group dimensions and texts, it creates leader lines which are invisible.The leader line can be seen with the command SHOW_INV_GEO. By doing this, Drafting adds the info INVISIBLE to the leader lines of the groups.The problem is when you want to clean a drawing of the invisible elements coming from other file format such as DWG: if the tip given in the Help > Program Ref. Guide > SHOW_INV_GEO:SHOW_INV_GEO GLOBAL CONFIRMDELETE SELECT GLOBAL INFOS 'INVISIBLE' CONFIRM ENDis used, it deletes silently all the groups as well.The Help should at least give a warning. The best would be to re-arrange something on Drafting to avoid this problem.
My company has thousands of parts that were not established with "material" specifications. When sectioning an assembly, the crosshatching always chooses what's on top of the listing for material, which is aluminum. 98% of out parts are steel, so the crosshatching always have to be changed. Add an option to allow a material to be the default crosshatch style.
It should be possible to operate the license server on a virtual server! For security reasons, we operate our license server on a virtual machine. This is not supported by PTC! The passwords can not be resolved to a network address of a virtual area. Nevertheless, there is a solution: - Manually configure a network card and of old PC, which is scrapped assign a MAC-ID - Retrieve license to this MAC-ID There should be a supportete solution!
If I have 3D dimensions and 3D GD&T, those should be included in the STEP file (AP214). I would also like to see Model Manager data (Model Number and Version) as well.
Hello, Product Idea: To split single disjointed face into separate individual faces in ProMechModel. I have a Creo model which contains one disjointed face. I get ProMechModel object using ProMechmodelGet() API. Can you provide additional argument to ProMechmodelGet() API for ProMechModel to get multiple faces from single disjointed face of Creo model? This was supported before WF-3.0 as per my knowledge. For more information I have written a code to show the current behavior i.e. getting disjointed face. I have attached "12654003.zip" file which contains following data: 1. "toolkit.c" which contains source code. 2. "log.txt" is a log file written by code. 3. "make_install" is a make file using which we build the code. 4. "CAD_model" is a cad model directory in which I have used "disjointed.prt.5" model. 5. "text" folder 6. "protk.dat file to run the application. 7. "expected_behaviour.jpg" is an image for more explanation. Steps to build project: 1. b
I put in a request several years ago to be able to perform buckling analysis for pressurized structures since that capability is THE critical analysis type for rocket structures. This new "product idea" is just a smarter explanation of that year's old request. I now understand that the way that NASTRAN (and presumeably other codes) accomplish this kind of analysis is by using a Pre-stress analysis. Fundamentally, a user inputs all of the pressure loads and runs a pre-stress analysis that "determines the effective stiffness matrix" for the structure when it is stiffened using pressure. Then, subsequent to that, the user runs a standard buckling analysis that uses the stiffeness matrix from that pre-stress analysis. Currently Creo only offers Prestress static and prestress modal. My industry badly needs prestress buckling.
In Creo Parametric sheetmetal, there is a really good feature that allows the user to identify bends and give a sequence number, that then gets created as Model Dimensions for the drawing. Unfortunately capability is not available in Creo Elements/Direct Modeling Sheet Metal, but it would be a very good addition to the module.
I would like to be able to have more control over how the tables show. Currently the size cannot be changed and it is difficult to read the tables.
Die neue Option "Besitzer transformieren" (V19 M020) sollte nicht nur eine Option beim Positionieren sein. Generell beim Auswählen wäre diese Funktion eine große Hilfe!!Als Beispiel: Beim Erstellen einer Teilegruppe fehlt diese Option. Teilegruppen könnten dadurch viel effizienter erstellt werden, des Weiteren kann man auch den Inhalt der Teilegruppe viel präziser "Selektiv eigenständig" machen...
The size of a new window that is opened from the Creo internal browser should be remembered or made somehow configurable.The current new window (here Creo 3.0 M020) is much too small.Everytime a user opens such a new window the window have to been re-sized.
When you move the gadgets in dashboard, they return in the old position every time data are refreshed (F5 button).
A row added to a table should adopt the text style and justification of each cell of the above row - enough said?
Tried to use the sweep blend command to make attached part. Trajectort at both end is straight. All sections are round and last three sections are with same diameter,But when clicking of dimensions and when checking dimension at the end it doesn't show diameter. Instead it shows arc length. PTC should need update for the issue.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.