Recently active
I’m looking for a solution to build a Configurable Product in Creo that includes a mechanism.Here’s the scenario:I have a rail mechanism with variable length.When a specific variant (length) is selected, I want the linear motion to be limited according to that selected length.What I’ve tried so far:I created a Motion Skeleton inside the Configurable Product.The rail module was connected to the first body of the Motion Skeleton.The cradle module was connected to the second body of the Motion Skeleton.I was able to build variants using Variant Builder, but the problem is:The cradle’s position is driven by the Motion Skeleton.Changing the rail module length does not affect the motion range, so the cradle runs out of short rails.To fix this, I moved the Motion Skeleton into a new module to build different lengths.However, the Assign Choices function doesn’t work (red icon appears, and I can’t check the checkbox for length).Question:Has anyone successfully built a configurable assembly that
Unfortunately, this was never fixed. Now, the Activation Key server is down (URL). Is Creo Elements Direct Modeling Express still a usable product? If so, what's the fix?
I am using Creo Parametric Release 11.0 and Datecode11.0.0.0 Modelcheck is not running properly. i have the files setup. (config_init.mc... and others). i have also enabled modelcheck in the config edit as well that the Modelcheck_dir. I have also enable show_reports. (see attached pic). When I run Modelcheck interactive, it completes the process but does not display the modelcheck screen. I
I am using Creo Parametric Release 5.0 and Datecode5.0.6.0工程图里面的表格和尺寸线线的颜色,能通过配置修改吗?电话15992617285 邓工
Do you have to produce design data (2D Drawing, MBD packages, etc.) that supports a mix of suppliers where some want ISO/DIN standard GD&T and others want ASME/ANSI standard GD&T? This question came up from a team at our European division that is working between Creo Parametric and Windchill and NX and Teamcenter.I had always thought the standard was up to the company creating the content, with some understanding given to the typical standard for the majority of the suppliers being used. Any suppliers for whom this isn't their norm would still have to follow the called out standard.We would be curious to hear if anyone is providing content that covers both standards as part of normal process, and how (overview) you do it.
I have creo 9.0.5. I'm trying to export a .dxf file so that i can import it into my plasma table software (torchmate V9). The problem is when I go to import it into torchmate, nothing shows up. A long time ago Creo support helped me change some export settings and we got it to work but I've forgotten since then. Any ideas?
Creo Parametric 4-12. Mold design/Casting application of shrink by scale for anisotropic shrink. When applying a shrink by scale feature a reference csys is used to apply the shrink. Can anyone offer some insight into how/why the selection of this csys is important? What are the criteria that should be used to determine the "best" csys for use with anisotropic shrink applied to a design part (reference model). Can anyone offer best practices based on theory or practical experience? I am focused on injection molded polymers in this context if that matters. I would default to the use of a csys located by determining the centroid of the reference part being shrunk, but this is an educated guess.
I am using Creo Parametric Release 12.4 and Datecode12.4.2.0Hello,We are encountering a problem when creating the .bom file. The .bom file is created, but it is limited to 2-3 characters, whereas we need more characters in this .bom file. We would like to avoid having to modify it manually each time, but rather have it allow more basic characters. Is there a configuration that allows us to do this?Thank you in advance,Best regards,
We have been seeing a new icon in the upper right corner of Creo 10.0.7.0 at different times. Never seen it before. Nothing in session this time.
12.4.2.0, there is only an online version (or at least, in my experience) Does anyone know where I can find off-line version of pro/toolkit help? TIA
I recently has some symbols in drawings change. Some are missing. Then I noticed that the Dimension Text Symbol Pallet has changed. Did I accidently delete something or redirect something to make this change? I checked this post and a couple of others without finding a solution: https://community.ptc.com/t5/3D-Part-Assembly-Design/Symbols-missing-from-dimension-text-pallet/m-p/967490#M136117
It seems a little thing but the ability to complete sketch entitiies and return to the select tool, to complete features, to activate the OK button on most pop up windows, etc. all using the middle mouse button is a massive advantage in efficient workflow and productivity - use Solidworks for a bit and you notice the increased mouse travel. Completing a sketch though is a significant ommision from the list - you still have to directly pick the pick the green tick. If the middle mouse button also completed a sketch this would complete the set beautifully!
1. Describe the ProblemDefault_dec_places is not working as expected in a specific case - see video attached.Default_dec_places works correctly, when dimension is defined by an equation in the feature creator.When driving dimension is modified by the same equation - resulting value has more decimal places.Result dimension should have the same number of decimal places as specified in default_dec_places, or user should be clearly informed (maybe with a pop-up message) that displayed and actual dimensions are different. Summary: Feature definition : dimension specified as 360/7, dimension - 51.429. Displayed dimension rounded to 51.429. Geometry length – 51.429 – CorrectDriving dimension modification: dimension specified as 360/7. Dimension - 51.42857142857. Displayed dimension rounded to 51.429, Geometry length - 51.42857142857 - Incorrect2. Are you using a workaround?No workaround available. default_dec_places value is not respected, when driving dimension is
1. Describe the ProblemI would like to be able to create a datum feature symbol (DFS) attached to a leader line directed to a surface in Creo, according to ISO standard 5459:2011. This DFS would not be related or attached to a dimension and would be terminating in a filled circle (see figure c in attached image) or in an open circle when the surface involved is hidden (see figure d in attached image). This issue has been identified in the article CS332341.2. Are you using a workaround?We are currently using the traditional DFS feature attaching it to the surface but it does not allow us to clearly show the area we want to refer to. Therefore, we are placing the DFS visually around the area that is defined.3. What is the use case for your organization?We would like to use this way of defining DFS to be able to define one on a specific area on a huge surface that can't be defined by only one DFS. That way, we are defining cosmetic sketches of the area we want to ref
I frequently disconnect and reconnect to our network when i bring my laptop into conference rooms for meetings. Creo often gets stuck with popups on top of popups (unsaved data warning, license lost, and Windchill server unavailable). I am forced to restart because I cannot select the "retry" option on the license lost dialog as its covered by another popup that can't be moved. Is there a way to get around this?
We are actively moving to SharePoint data storage. Can assembly be organized with Parts in multiple folders / Multiple access users working on different parts of an ASSEMBLY. Assembly Regenerate should update the assembly with latest in SharePoint folders.
Hi, I will want download the sw Element direct modeling with 30 days freeHow many licenses are possible for this period?How do they work? Locally or on the company network?Thank you
I went from Creo Elements 20.4 with Workgroup manager 12 to Creo Elements 20.6.2 with workgroup manager 13.0.2.1In the drawing browser, the name of the drawing used to be the Windchill file name, and now it is the Windchill name.Is it possible to change it to the windchill number or file name?I used to use it in a lisp, for example:display (oli::sd-am-inq-drawing-no)But now I get a different value then I used to.Also I can't find how to get the windchill attributes (like PTC_WM_NUMBER) of the drawing in lisp.I tried lot's of things but I can't find it.
hello all, i am using the simple repeat region method to create a family table in my assembly drawing.because of this i am using filters such as "&fam.inst.param.name == xxxxx" however, in my assembly, i have the same part file copy pasted 4 times (they make a square within my assy) and each instance of the assy has different instances of that part file. ex:assy-1 has part-A, part-B, part-A, part-Bassy-2 has part-C, part-D, part-C, part-Dassy-3 has part-E, part-F, part-E, part-Fassy-4 has part-G, part-H, part-G, part-H so if you notice, they have basically a top/bottom and side/side of the square for each assy instance.when i use the 2-d family table it comes out correct, looking like the example but in table form, but i want to use the simple table because i want to change the top row names. when i apply the filter like always, because the part file is named the same for all instances possible, i end up getting ALL 16 of the part instances for each compone
My mirror features in my sheet metal is not updating when I move my cutout in the sketcher. I noticed that there are plenty of threads mentioning mirrors not working, but what is the solution? is there a config file line that I am missing?
I have installed Creo 12 successfully on 2 machines but on one of the machines I get the errors below and the browser fails to work. Presumably the errors below is because the browser is not working. Things I have tried already: Removed all config / UI files (Vanilla install) Reinstalled using an install script that worked on the same hardware Deleted the Creo Agent and Platform folders and replaced with folders from a known working install Performed a Windows Control Panel > Apps >PTC Creo 12 Platform Services > Modify > Repair I have Creo 9.0.9.0, Creo 12.4.0.0 and Creo 12.4.2.0 installed. Creo 12.4.2 works fine as far as I can tell other than the internal browser not working, but I do need it to be working. Any other suggestions? This happened one other time and I had to reimage which I am really trying to avoid.
Hello, how can I make the flexible parts used in snapshots appear in the drawings, for example, the different states of a spring depending on the positions of a mechanism? Thank you
I am using Creo SimulateNot able to retrieve Creo simulate files. Facing error. How can I resolve that ?
how can i run utility system window basically command prompt in creo 12 with mapkey its not happening with this latest version
Hi, I am trying to select multiple references (2 a surface and an edge of a part) when creating a datum plane. For some reason holding CTRL while selecting them doesn't work. I can select one or the either and it turns green but when I hold ctrl the surface turns orange for a sec but doesn't select. Could this be because I am using VMware Fusion on my Mac laptop. Is there a work around that I can do? I need to have two references to add a rotational offset for this plane. please help. Thanks
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.