Recently active
As of right now, a shown dimension shows "DRV_DIM_D1" in the model tree when it is "shown". I think it would be much more helpful to see the actual name of the dimension (Edit -> Right Click on the Dimension -> Properties), instead of adding a second name to something that already exists. If I have named my dimension for some reason, I will need to update that name in two places. In other words, I can name the dimension DIM_A, and can name it DIM_A in the model tree, but then if I need to change one of them to DIM_B, it must be changed in both places.
Including metadata and extended data would help in programming parts from DXFs. Batch toolers and CAM software such as Cincinnati Bend Simulation can read the data to automatically pick up material thickness, bend lines, bend angles, and radii.
Generally for extension springs, spring force = initial tension+k*(current length-original length)And for compression springs, spring force = k*(current length-original length)Adding initial tension option is not there in Pro-E & I've found that the difference between theoretical & Pro-E spring force is because of this component missing in Pro-E.Note : Initial tension is the force which is holding the extension spring in the coiled position. and it can be calculated automatically using a simple formula
In Annotation the welding Symbol "aufgeweitete HY-Naht" in symbol template browser is missing.The symbol should be refererenced to DIN DIN EN ISO 2553. Please enhance the Annotation symbol template browser about these symbol. Please find attached more details about the symbol.
There is no option to control Flatten forms as ON or OFF as default of Flatten Pattern in Sheetmetal and would like to have the preference as config option.
It would be useful if the the 'View Normal' function was available under the right hand mouse button. Either by default or as a customisation.
You can change your sheet in the left hand corner in Print mode ; before you press Preview, you don't have to exit Print altogether, but I would like to be able to change my sheet in Preview Mode.
There should be options available to change the background of the ribbon in Creo 3.0. Since there are options to tailor just about anything in the software, why not include something to adjust the ribbon interface?
Specify a tolerance or "within ## units" for a bonded definition. alternatively, easier method for working with merge tolerance for gaps in a default bonded interface.See attached detail about this case.
Currently, there is only a config.pro option to change decimal places of value and display by defaulte_dec_places and default_ang_dec_places. Unfortunately, both config option changes also decimal places of tolerance. I 'm looking for a config option, who I can change decimal places separately. config option one for value/display, and config option two for tolerance.
Current state:Features added to assembly component are not visible in the assembly until it is regenerated.According PTC: Dynamic Edit is available only if auto regeneration is enabled.Set config.pro option ENABLE_AUTO_REGEN YESDynamic Edit is available in part mode onlyRequest:Enable Dynamic Edit in asembly mode., so that modification perfomed on the component are visible in the assembly (without regenerating).
Current state: In the drawing view, if the view display is set as shading, then the offset lines are not removed from display, if the line passes through the model. Request:Offset lines should be removed from dispaly for shading view as it currently works for display set as hidden.
Currently there is no way to know what simplified reps, explode states, etc. are used in a drawing.The user has to pick each view individually and look at the properties to see which states are used.Please add a function to list models and states used in a drawing.
A checksum or hash sum is a small-size datum from a block of digital data for the purpose of detecting errors which may have been introduced during its transmission or storage.
Some 5 axis roughining strategies should be introduced in the manufacturing suit. At the movent there are no direct and simple way of configuring 5 axis roughing tool paths. Other CAM software are getting their grip on such strategies. I think this gap should be addressed ASAP.
While creating Revolved Cut or Extrusion using sketched section. Feature is "full" when it cuts or extrudes 360°. This 360 ° dimension is rarely used in the drawing.or annotated 3D-model. However it has an general tolerance.Problem occurs when wanted to "display" 3D-model with Least Material Condition (LMC) by using #DIM BOUND functionality. When LMC (Lower) values of features are applied the revolved feature is no longer "full" but it leavesan small wall/gap, defined by general tolerance. Gap / wall then potentially causes following feature(s) to fail. My proposal is: If we could have an Revolved Cut or Extrusion with an Tick box specifying: if the feature is Full. No tolerance applied to full / 360°. 360° dimension could be blanked (removed) as well, as it is not really needed.Instead of Tick Box, config.pro option could be used for providing same functionality. There are alternative ways of 3D modeling but I do not see them as workaround f
Currently you can create a new simp rep using selections in a master rep. Would like similar ability but from an existing simp rep.his can be a considerable time savings when needing multiple representations.
When you do a cross section of an exploded view it takes the cross-section first, then performs the exploded state. Normally you might not need this, but if you have mechanism items shown in multiple positions you can use snapshots to help create drawing views in each position. It works in the model as expected, but in the drawing it will hide any components cut by the cross section before moving them into place.In short, the drawing should match the model. The model should match the drawing. Exists as an enhancement SPR 2105078
Creo Elements/Direct Modeling and ModelManager DB-STATUS is that it shows whether or not the edited after reading from DB, hard to understand from the title and value. I want to change the representation of the title and value.
Please add the ability to select multiple features in the drawing model tree and then show their dimensions for a view you then select.This currently does not exist in Creo 2 or Creo 3 Parametric.
Functions likeTR_CHANGE_WIDTHTR_CHANGE_CASE_CONVTR_CHANGE_LINESTR_CHANGE_WORD_WRAPTR_CHANGE_PRECISIONare currently unavailable through the Annotation interface. If you want to update your drawing frame, you need to save the frame to .mi, load the frame in Drafting, make your updates, save to .mi, load frame back into Annotator, and check the new frame in.
The system should show a warning if user updates drawing in Annotation and the corresponding model in Modeling is loaded not full from ModelManager(e.g only structure has been loaded)
Please add back the ability to double click edit a dimension or it's tolerance while in drawing model using Creo Parametric 3.Currently in Creo 2 you can double click on a dimension (parametrically driven) and edit the value of the dimension.Using Creo Parameteric 2 you have to use 4 mouse clicks to edit the tolerance value.Using Creo 3 you have to use 4 mouse picks to edit the dimension value or the dimension tolerance value.Please change it so when you double click on the dimension main value or the tolerance value you can enter a new value for the value you double clicked on.Creo Parametric 2 ( 2 clicks )Creo Parametric 3 ( 4 clicks )Note: this ideas has been marked as duplicate, please see Edit the tolerance of a dimension in drawing by using double click
Untill version 17 you could take the projected center of a circle, line,... on a workplane without going back to the workplane again.In version 18 you could solve this with the classic commands, but in version 19 that is also gone.Now you can get the "blue" projection lines with shift, but then you need to select the center on the workplane itself.It was much easier to do that with the old versions.Can this come back and why is this not possible anymore?thanks
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.