Recently active
Trying to post more.... I teach a wide variety of Creo classes and usually tell participants in class to try to run a mostly stock config.pro file as PTC does a good job with the defaults. With that said our/your Creo administrators like to modify those configuration settings and get us accustomed to sometimes old ways often slower ways of doing things. For example, It's simply slower to feel compelled to look straight on in a sketch 100 percent of the time. Looking for a config.pro option to close dialog boxes. In Creo 9.0 the development team felt it necessary to make the dialog boxes automatically open for the user to fill in prompts. After all an open UI seems helpful. In my effort to be open-minded, I've tried my best to use Creo with this new default. I however find the dialog boxes open right where my model is + I use effective speed tips in Creo (that I teach - maybe a topic for a lunch-and-learn). The dialog boxes open is A b
Hi, I am still using Creo 4.0 M050. When making 2D drawings of a part, I usually specify a dimension tolerance as 'Plus-Minus' or as a 'Letter-Number' combination (like H6, G7, E8 ...).Sometimes I feel it is more appropriate to specify both. The nuisance is that Creo puts the Letter-Number combination (E8 in this case) always behind the Plus-Minus numbers.So, like this:But I would prefer that the E8 comes immediately behind the nominal dimension, and in front of the Plus-Minus. Like Diam 3E8 +0.05/+0.10.I couldn't find a way. Is this possible in Creo 4.0 ?
I am using Creo Parametric Release 10.0 and Datecode10.0.5.0in Creo 10.0.5.0 when saving an assy as an iges (save-as), the iges does not shoe datums and points.Here are the errors that I facedn/a
Is there a way to use the Search tool to find all edges with a length greater than x?Example: I want to round a bunch of edges in my model, they are quite a few and tricky to select. If I could do a search and select all edges longer than 15. That would cover most if not all edges I want.Is this a thing in Creo Parametric?We are using Creo 7 here.
Hi, does anyone know if there is a list of configurations for Parametric's?I know the PTC help page, but I'm looking for something else.
Hello, Today i have a question about global structure and interractions between parts, assembly, bill of materials etc. Here is a view of my architecture :For creating new products, i design parts. These are assembled in assembly and for the master assembly i edit a bill of material with a repeat region in a table. Export in .csv, sort in Excel for buying standart parts, supply raw material, manufacture parts, send to subcontractor for some etc. For parts which i manufacture, i create a manufacturing assembly with a raw part. I create the machining program and a drawing for our machine shop. Now the questions :To manage the supplies i use my master bill of material (parts and components are sorted with parameters in the repeat region). but for the part i machine, i don't need the part itself but the raw part corresponding to this part. My problem, there is no link between these two. Currently I make the link manually but it's tedious when you have around thirty part
I created an assembly using skeleton and I want to create a mirrored copy. I tried to save as a copy but I think that due to the complexity, the result presents errors. I just want to save it as a mirror, but it could be as an IGES part. I'm saving an iges and opening the iges and mirroring it, but in Windchill this process is slow. Is there any more direct way to do this?
1. Describe the ProblemThis is an improvement proposal for GD&T Analysis .To improve user experience, All dimensions in the Stackup Details Table are appended with balloons in the drawing area to make interpretation easier,Afterwards , When the tolerance analysis is completedall Stackup Details Table should be exported to EXCEL table (.xlsx)2. Are you using a workaround?No workaround available.3. What is the use case for your organization?Standard designer's work, modifying and validating dimensions using GD&T Analysis.4. What impact does this problem currently have on your organization?When the model is complex or has a large number of components, selecting too many dimensions will make identification difficult when using tolerance analysis. Exporting the results table to xlsx format will also make the result information more convenient for field personnel to use.
Hello, I am exploring the piping option to use in our assemblies. Because we are working with a PLM system (Windchill), I need to embed the pipe pieces created with the piping option. Otherwise each little piece of pipe will get an article number in Windchill. What I would like to get is for the assembly that contains the embedded parts, to get a parameter: materialcode & length for each type of pipe used.Any other ideas are welcome as well. The moral of the story is: The pipes are embedded but I want to be able to extract the materialcode and length of each type used, regardless of the amount of pipe pieces.Are there possibilities here? All I can find is a little menu that can tell me the length of certain pipes and store it, but it's not extractable nor does it update.
Hi all, After an upgrade in a drawing template, where i updated/deleted some symbols, annotations and change fonts.But, it seems that an old fonts is still present, because i have the message "***.ttf.ndx is not loaded.But for me, the annotations/ symbol which used this one are deleted.How can i purge the drawing template for all the fonts unused?I tried the options upadte_drawing all, the delete unused symbols options but without success.How can i clean my drawings template for unused fonts?
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running? Creo Parametric 9.0.6.0 connected to Windchill 12.2. What is the problem?With Extremely Large Assemblies, the expand all button in the ribbon must not be used as it induces a download of the entire structure into the workspace with a resulting very large cache (+100GB). We would like to find a way to hide this icon in user interface. It would be nice to enable all the icons in this area of the Creo interface to be customizable for the user to hide/turn on. 3. Are you using a workaround? If yes, please describe it.There is no workaround except hope the user does not select this when working with a large assembly that depends on simplified reps4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Not having this icon viewable would prevent the user from making
Hello all, I have a application which loads model into creo using ProMdlFiletypeLoad() and then I use a Macro using ProMacroLoad and ProMacroExecute. I have noticed that if my model is active in current window the ProMacroLoad does not work. It works only when there is no active model. What could be the reason and How can I solve this?
Hi Guys,Can we add the "IP Address" in .ini format, which we used for the Creo View Watermark? Regards,Aj
Hello Team, I have around 50+ points defined on a surface in the assembly using Coordinate system. Now I want to pull them in the drawing directly in a table. and this table should be parametric. Do we have such an option? I have already tried Hole table options, but with this the points will not get automatically updated in the drawing once they are moved in the assembly. Please provide an alternate way to fix my problem. Right now to make the table parametric I manually add the dimensions for the point in the drawing, copy its symbolic name and paste it inside the cell with a prefix "&", but i have to do this for all the 50+ and for both X & Y dimensions.
in Creo Parametric 7.0.3.0,Is there a function that allows me to make ALL hidden parts visible when I'm in an assembly?Obviously, I can go through and select them individually, but this is a large assembly and it's not worth the time of day to do all that. So is there a button that does them all at once?
Is there a way to project all edges from a surface into a sketch without having to select them all individually?I am running Creo 3 - M010Thanks in advance!
Hello all, I'm trying to measure an angle between a edge of my object and the line that makes up the envelope. Does anyone know how to do that?
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 9.1.0.02. What is the problem?The default Primitive color is black, but the default color in Creo Parametric is Grey. The colors should be be more closely matched to improve product compatibility. This is a known issue, the Article CS26247 states the tool is working to spec so there is no plan to change it. But the spec should be updated, and the product updated.3. Are you using a workaround? If yes, please describe it.The user can make the change locally, or admins can push a global change.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Users opening for models in Creo View5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Our full user base is effecte
I am using Creo Parametric Release 6.0 and Datecode6.0.2.0Piping and Drafting features are not working for 1 user, whereas we already have licenses for Creo Enterprise SE with Pro/INTRALINK in which these features are included. Attached is the error screenshot from user's computer
1. Describe the ProblemHi there, currently Creo Parametric provides a bunch of export formats like STEP, IGS, PVZ, STL, etc.What is missing, is a web friendly format like GLB, GLTF, USD and so on. 2. Are you using a workaround?no3. What is the use case for your organization?The file formats listed above could be used to generate a more immersive user experience with 3D web content for our customers compared to still images.4. What impact does this problem currently have on your organization?hard to tell
I am using Creo Parametric Release 3.0 and DatecodeF000We need to uninstall a node-locked license from a user - and install it on a new computer.Need help
hello 🙂 I have a trouble. some dimensions I can't change orientation or move to another plane. like, I want to move Φ12 to the top view, it will tell me " you can not move the specified dimension to the selected view" What is the specified? I can't perform this action in the Annotate function too! thank you for your help
Hi Community I'm using Creo 11.0.1.0 When I import a STEP File that was created with Siemens NX 11, there are a lot of surfaces that fail.By optimizing the import settings, the load time was improved, but the surfaces still aren't ideal. Can anyone share a STEP Import Profile configuration?Thanks for your help! This is the STEP file header:ISO-10303-21;HEADER;/* Generated by software containing ST-Developer* from STEP Tools, Inc. (www.steptools.com)*//* OPTION: using custom schema-name function */FILE_DESCRIPTION(/* description */ (''),/* implementation_level */ '2;1');FILE_NAME(/* name */ 'FileName.stp',/* time_stamp */ '2017-09-15T09:42:51+02:00',/* author */ (''),/* organization */ (''),/* preprocessor_version */ 'ST-DEVELOPER v16',/* originating_system */ 'SIEMENS PLM Software NX 11.0',/* authorisation */ '');FILE_SCHEMA (('AUTOMOTIVE_DESIGN { 1 0 10303 214 3 1 1 1 }'));ENDSEC; Best wishes Alex
1. What product and version are you running?Creo 9.0.5.0 Windchill 12.1.2.12. What is the problem?We are currently unable to clean up the MBD Dimensions the way we could in 2D drawings3. Are you using a workaround? If yes, please describe it.No4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Please find the below (Image)details regarding the current situation with the MBD models:The combined states contain a large number of MBD 3D annotations (dimensions) scattered across the 3D model. These dimensions are not organized properly, making it difficult to manage.There are multiple combined states within a particular MBD model, each containing numerous annotations.Currently, users are spending a significant amount of time manually cleaning up the MBD annotations, which is proving to be a challenge and impacting productivity. We need an automated solution to streamline this process and make the dimensi
Using Creo 8.0.11.0 and having some trouble getting an assembly to come together the right way. Major part of my problem is how parts refuse to move to satisfy the constraints on them like how I'm used to the SolidWorks mates work. Is there a config/setting I can change to make it function more like SolidWorks in that way? The rollback on the assembly while using edit definition is a whole other challenge adding onto this.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.