Recently active
For whatever reason, Creo does not offer the ability to set a default clearance distance per machine. I do not always remember all the travels on our machines and would like to set default clearance values to solve that issue.I basically want to set a relation that states:IF work cell = "insert machine name"clearance = XX.XXHowever to do this, I need to know the parameter names to pull for the work center and the clearance, and I do not know them. Does anyone know what those parameters are, or know a better way to do this?
1. Describe the ProblemWhen stacking drawing tables side by side or on top of each other, the readability will be improved if it was possible to have the outer border of each table represented with a thicker line as compared to the inner lines of the table. In Creo Parametric 10, it is possible to change the line thickness of the entire table using "Format > Line Style > Modify Lines" and then select a random line in the table, but this will affect innner lines as well as outer border of the tabel. At this point it should be possible to select either an internal line or border line and have the format change work only on the lines of that category.2. Are you using a workaround?Some users are placing tables with a small distance in between, but visually that looks ugly.3. What is the use case for your organization?The idea would increase the quality and readability of output from drawings, e.g. PDF output4. What impact does this problem currently have on your organization?Easier f
Hello.We've recently switched from Creo4 to Creo9, and in Creo9 I'm facing a challenge I never had in 4:In part and assembly design, when I hover over geometry, some of the surfaces appear to be highlighted in "broken" or xxx-patterned highlight, like below: while other are fully shaded, as if masked with transparent layer : for both, selection "repaints" them just fine with selection color. Went trough all reasonable config options I could think of, all regarding highlight, transparency, selection, with no visible changes. I'm looking for a method to achieve consistency in the highlight, preferably with all being the second option, without xxx pattern.Thanks 🙂
Hi,the tool path of volume roughing sometimes works from the outside to inside (correct) and other time as opposed to.I attached file manufacturing with a video for try the problem.The support dosn't help me because for they are correct this Works to product specification for Creo Parametric 😡 😡 😡 😡 😡.How can do it the sequence in other way? Thanks
1. Describe the Problem Reference: Case - 17509073 SPR - 15725772 Article - 428088 Often, when importing an EMN file in to an existing assembly, one of the components gets replaced. During that process, it removes component level parameter that was on the original component. For example, we use the component level parameter LINENUMBER. This parameter is critical as it is used for Windchill line numbers BOM. Often, we have an ECNs where there was an in-line BOM change from one resistor to another. When trying to update the CAD, and using IDF collaboration, the line number parameter gets deleted and we have to manually add it back each time. Please do not have component level parameters deleted on a collaboration replace. 2. Are you using a workaround?Manually readding the parameters each time.3. What is the use case for your organization?See above in the description.4. What impact does this problem currently have on your organization?It slows down ECN CAD wo
When I want to delete a part from a sub-BOM in an assembly in Creo, the part is not deleted from the BOM. What could be the reasons for this? Can you help me with this? Translated by the moderation using Google Translate -----------------------------------------------------------------------------------------------Creo'daki bir montajda alt ürün reçetesindeki bir parçayı silmek istediğimde, parça ürün reçetesinde silinmez. Bunun sebepleri neler olabilir? Bu konuda yardımcı olabilir misiniz?
1. Describe the ProblemWhen following a master modeling technique in Creo, creating a drawing of an assembly composed of parts from different bodies does not support automatic dimension retrieval. This forces users to manually add dimensions to the drawing, which contradicts the efficiency expected in a model-based design process.Proposed Enhancement:I request the ability to show dimensions for imported geometry in assembly and part drawings. This feature would enable users to automatically display the associated dimensions from the model geometry, similar to the “show dimensions” feature for standard models. This enhancement would significantly improve the integration and usefulness of the master modeling technique, eliminating the need for manual dimensioning and streamlining the design workflow.2. Are you using a workaround?No. Currently, users must manually create dimensions for assemblies and parts derived from body geometries, which is time-consuming and prone to errors. Incorpor
Hi there... I have a logo designed which I need to extrude onto the surface of a part. I have copied the font into the Creo 11.0.0.0\Common Files\text\fonts folder, and the font shows up in the Font list Sketching > Text dialogue box. I can write out the logo onto the surface, but it doesn't seem extrude. I cannot spot any node gaps either. The font is a really common Windows font: Berlin Sans FB. Is anyone able to see if you can extrude any words using this font? Unfortunately, this site doesn't allow me to attach a copy of the font but it should be in your Windows folder if you use. I'm really puzzled
I recently upgraded to Creo 9.0.1.0, and was working on a drawing when I started using the new Surface Finish workflow. I've asked a few other users around the office and no one can seem to figure out where the "placement" options went that allows you to to decide whether you want a leader, normal to entity, on entity, or free placement of surface finish. Does anyone know the answer to this? Screenshots below of what I'm talking about. Creo 8 and before Surface finish Creo 9 surface finish options. Can't find the placement options anywhere. My company doesn't normally use leaders for surface finish. We put them on the dimension lines or on the edges themselves. Thanks, Doug
1. Describe the Problem Reference: Case - 17494178 SPR - 15684520 Article - 426936 There are many situations, while working in Design Exploration, where items in a checkpoint are flagged as 'modified' accidentally and added to the Design Exploration Session. When working with Windchill and/or Family Tables, this could end up causing a lot of future problem managing that checkpoint and pushing out the design to a regular Windchill connected session. Logically, it would make sense, that if an object is deleted from a checkpoint, that it would also be removed from the Design Exploration Session. Then, we could add it back into the checkpoint, unmodified, and continue working in the checkpoint. However, that is not what happens. DEX still tracks the changes to these models, even if they are no longer in the Creo session. There are now no workarounds to clean up a checkpoint that has modification issues besides rebuilding the checkpoint from scratch. If the whole point of
I have a requirement to auto-populate the Creo Parametric revision history table on drawings from the Windchill information (Revision, Modified By, Modified On, and Revision Description (IBA)). The Revision Description will also be a Creo parameter. The requirement is there needs to be intelligence so that when the drawing is revised from revision 0 to revision 1, the revision history information for revision 1 is automatically applied to the next row of the revision history table from Windchill, and the revision 0 information is maintained on the drawing. The same will be true for all new revisions after that. Once the drawing is revised to revision 7, revision 0 is dropped from the revision history table, all other revision history information is shifted down one row, and then the revision 7 information is added to the last row; and so on for all revisions after that. Does anyone have any thoughts or ideas on how to accomplish this?
Hi, I have a sheet metal geometry as shown. I am trying to count the number of bends using the toolkit.Here's how we thought of it:1. Collect flat, flange, and bend features from the model tree2. Get vector values of reference planes of collected features3. Increase the number of horizontal/vertical bends using vector values However, the following problems were expected: Five flat features are visible in the feature tree in the illustration. When looking at the unfolded shape, the number of bends is 1 horizontally and 2 times vertically. Any good way to count the number of bends?Any ideas would be appreciated. Warm Regards, SeonHo Cha.
Dear community,I'm facing frequent crashes in Creo, particularly when using Render Studio on large assemblies. Thankfully, PTC has implemented a feature to recover files after a crash. However, I've encountered an issue where the "Open" button is always grayed out, preventing me from accessing the recovered files.Has anyone else experienced this problem? thanksusing Creo 9
I am using Creo Parametric Release 5.0 and Datecode5.0.4.0 This is customer issue. Any Editing in part results in software crash.
I have installed the Creo Elements Direct Manager Server. All functions are working properly. However, despite having a license, the web interface is giving an error. I believe it's using a Jetty server. There might be something missing or incorrect. I would appreciate any help on this matter.
Hello all, I have a assembly which is checked in. When I try to modify it I end up having a conflict box asking me to check out or continue. I want to avoid this conflict box avoiding and set default value as continue. I used dm_checkout_on_the_fly and set it to continue but noticed it just the continue is set just in conflict box as default but did not get applied I have to select okay eveytime. Is there any option by which I can apply value as continue instead of setting default value in conflict box. TIA
Hi,I am trying to create a motion skeleton that will move a part based on a cam type profile.I need help defining the connection circled so it stays on the curve when the "cam" moves side to side.I do not want to model solids, I just want it to be based off a sketch.Thanks for any guidance or help.
New function in the Integration Kit to inquiry if a part is corrupted or not in Creo E/D Modeling
Hi guys, to add notes in drawing i am copying text from excel, then pasting it using unattached note. i want to save my custom notes in different names under Insert filed option. to optimize the process. Is it possible to add custom note under insert filed option. kindly help me on this, if there are any other better option please guide me.
Hi all, I would like to know if it is possible to pilot the options list in the variant builder from Option model. In the variant builder, there is an option list: Each value pilot the view or the hidden af a sub-assembly, or a set of components. Where each choices is stored in CREO? In the pro program, in parameters? Is someone know if it is possible to pilot them (with toolkit or SmartAssembly)Regards
1. Describe the ProblemUsers can't scaling model with different factor on 3 axis with Scale model Feature included in Creo Parametric. 2. Are you using a workaround?the wrap feature can be used to do this, but it seem much easy to include this option in the Scale Model Feature.3. What is the use case for your organization?customer demand4. What impact does this problem currently have on your organization?customer demand
Hello @PARTHIBAN_K,A very nice in-depth explanation indeed. I am facing some issues with creating 2D shell pairs for my assembly due to surfaces and / or some components within the assembly overlapping each other. Because of thus, I can not use "review geometry" feature too as it gives errors. Could you please help me out and guide me with solving these errors? Do I need the model to be remade where the components of its surfaces do not overlap each other? Or can I use some other way to mesh like "thin solid"? Please guide. Thanks in advance 🙂 Reference topic: https://community.ptc.com/t5/Analysis/Shell-Idealization-Over-the-Solid-Model-in-Geometric-Element/m-p/446841#M1377
I am using Smart BOM, my company requires that if there is an ALTERNATE (or SUBSTUTUTE) part, the new "ALTN" part need to have the same FIND NO with the main part . For example: Main part is "ABCD" and FIND is currently 6, above FN6 is FN7 with part # "AFGK"I need to add new part "xyzk" as ALTN to FN6, it will have the same FN 6 as the main part and sit in between FN6 and FN7. In the next message, I will tell about how I make it but it still NOT working as we want. JUst tell the community what I already tried to make it. We are using Creo 7But if newer Creo can make it, we can change to new version. Thank You
YCOM, a leader in motorsports and lightweight composites, has pioneered the world's first fleet of racing e-scooters for the Electric Scooter Championship (ESC). Listen in to learn about their unique approach to product development, which involves rapid prototyping and collaboration with former MotoGP riders.
Hello! I am working on a project where a piping system is being modeled in Creo (v 8.0.3.0) and is desired to be analyzed (pipe stress analysis) in AutoPIPE (v 23.00.00.230). So far it looks like the best (if not only) way to take the working Creo model's piping geometry and plug it into AutoPIPE is via a Piping Configuration File (PCF), where (1) Creo is able to generate a PCF and (2) AutoPIPE is able to import that PCF . So far I have been mainly been focusing on step (2) to make sure I know what information in the PCF can be interpreted/implemented in AutoPIPE, and have been able to identify a couple of additional inputs that I would like to have added to the PCF (as shown numbered in red below).I'm now going back to step (1) (Creo -> PCF), and I'm trying to figure out how I can incorporate these inputs into the piping that exists in the Creo model (if at all possible). I've tried looking through PTC documentation on how to change/edit information in the Piping Sp
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.