Recently active
I am working to update a workflow to support designs specific to some variable manufacturing processes. To support this workflow accounting for growth/shrinkage of components in the design must be managed. To date I have used the mold design shrinkage feature on a part to change its size. This morphing reference part serves as a parent to other parts in the design. Prior to Creo 7 I have managed this with the shrinkage feature and a notebook (formerly layout) to manage the relations controlling the interface of this reference model to dependent models in the design. It is worth all of the work to set this up to enable automated design updates but as one would imagine it is not trivial and takes quite some time to get it validated. With the introduction of multibody modeling, I could potentially streamline this by getting rid of the notebook if I could scale a body in a part model. Shrinkage features cannot be applied to a body, so this begs the question is the warp transf
Dear friends, I created a new csys which I want to redefine the reference. ProFeatureReferenceEdit needs old & new references in form of array. but I have only one old and new reference. Any possibility to convert one reference to array format? Any suggestions are welcome status = ProFeatureCreate(input_destmdlSel, pro_e_feature_tree, opts, 1, &feature, &errors);status = ProElementFree(&pro_e_feature_tree);status = ProFeatureReferenceEdit((ProSolid)newmdl, &feature, &cSysRef, &cSysRef_2, PRO_REGEN_FORCE_REGEN);
When I open a solidWorks drawing in Creo parametric 10, I change the model using Flexible Modeling and then I save it in solidworks again. When I open the model in SolidWorks, my client tells me that the model has no intelligence. Is this correct and can I edit it again?
Hello, i've been trying to find big file of release notes not 2 page release notes about ptc creo simulate live 10.0.We are now on the edge of changing creo verions and i want to know if there are any significant changes or new interesting featrures in ptc creo simulate 10.0Where can i find it?
1. Define the dimension name of the PART model in uppercase English letters. 2. program execution code [Please refer to the attached file for Excel VBA code.]**********************************************************************************Dim BaseSession As pfcls.IpfcBaseSessionDim Session As IpfcSessionDim model As pfcls.IpfcModelDim Solid As IpfcSolidDim ModelItemOwner As IpfcModelItemOwner'// Current Model InformationSet BaseSession = conn.SessionSet model = BaseSession.CurrentModelSet Solid = modelSet ModelItemOwner = Solid*****'// SET RegenerateDim RegenInstructions As New CCpfcRegenInstructionsDim Instrs As IpfcRegenInstructionsSet Instrs = RegenInstructions.Create(False, False, Nothing)Dim BaseDimension As IpfcBaseDimension Dim j As LongFor j = 0 To rng.Count - 1Set BaseDimension = ModelItemOwner.GetItemByName(EpfcModelItemType.EpfcITEM_DIMENSION, Cells(j + 6, "B"))'// Send entered dimension values to modelBaseDimension.Di
Hi, I'm new to Toolkit development, I'm using Creo Parametric 8I'm developing a feature where to check Solid part with certain name say "X" already in an assembly if not I'm creating new part with API ProAsmcompMdlnameCreateCopy().Problem is whenever there is part of with same name "X"(which is not assembled) in session or Current working directory it throws me an error PRO_TK_GENERAL_ERROR (-1).I explored found API ProSessionMdlList() to get all model in session. This may be partially solves the problem.Using loop I can avoid creating new part.But I don't know how to check in Current working directory or any other specified location.Please help me out.If there is any better way for this problem, I highly appreciate it. Thanks, in advance!
Hi, I am working on an assembly where the order of operations is unknown (i.e. up to the fabricator to decide). Because of this, I have defined my hole features at the top level assembly level and expected to use the "Display level" option in the manual intersect mode to push the holes to the part level of the plate. This should give me the option later to remove it easily from the part level if desired without having to suppress or replace the features at different levels. I expected the hole note to transfer seamlessly, which it does after some troubleshooting on references to make sure the "Show Feature Properties" doesn't fail. The issue now is that the leader is missing at the part level and there doesn't seem to be any option to make it appear. I'm looking for solutions and/or insight on how to use the interesect tab with proper intent. TIA.
In Creo-8 i am trying to make a quilt form with a surface sweep, but unfortunately, in creo-8 sweep always default comes with a solid, am not seeing an option to create a surface sweep. Due to this am not able to select the quilt form.
Can I set priority to loading format files in the same folder as the drawing, instead of loading files in the format folder specified in the configuration file?
I am using Creo Parametric Release 7.0 and Datecode7.0.2.0Auxiliary Applications toolkit file running but not able to see it under tool kitHere are the errors that I facedThere is no error or warning message, the toolkit is running properly in Auxiliary applications window, problem is that tool kit not show up in Creo7.0. it works well with same setting before, now the toolkit icon disappear even it shows running after registered. wondering anything block the path or other issues.
HiI'm using Creo version 10.0.3.0Is there any possibility in aforementioned version of Creo to make multi body part from the assembly. thanks & RegardsDilip
This month’s challenge is based on a modeling problem I’ve seen throughout my decades in aerospace. An isogrid is a repeating rib structure that adds strength with low additional mass. Although it may appear simple, modeling it in CAD can be difficult, especially when you need to place it on a non-planar surface. Public domain image courtesy of NASA and Wikimedia Commons. Your mission, if you choose to accept it, is as follows: Beginner to intermediate: Model an isogrid on a flat surface. Expert: create an isogrid on a cylindrical, conical, or radome surface. The isogrid can have a size / spacing of your choice and can be placed on the interior or exterior surface. (If placing on the interior, I highly recommend creating a cross section to make it visible.) Optional: add fillets to the interior “vertical” edges. For this challenge, you can choose to ignore the center circular post and hole as depicted in the pictures. You can focus on the vertical sides of the i
I am trying to Simulation fluid flow around a rocket body in creo, I am attemptiing to use the simulation live feature but my university computers and personal computer do not have the necessary computing hardware. What and how do I use the simulation cloud, I've tried contacting the PTC tech support but they were no help.
Hi everyone, we wanna develop a function whitch would auto create a dimension to represent the length of specific edge in drawing mode. I found a few descriptions in web.link user guide. "The method pfcEmptyDimensionSense.Create() creates a newdimension sense associated with the type DIMSENSE NONE. The sense field isset to Type In this case no information such as location or direction is needed todescribe the attachment points. For example, if there is a single attachment whichis a straight line, the dimension is the length of the straight line." There comes two question. First, is there supported API to get every edge's length so we could make comparison to find out the longest edge. Second, if we could find the longest one, is there some snipped code could be refereced to really build up the dimesion like below ?
I have an old drawing file and I opened it in Creo Drawing 8.0 and want to create a Raster of that file.Can anyone please help me with how I can create it?
I set the 2d_palette_path in my config.pro to a location on Windchill (also tried desktop) and the path is not changing. The sketcher palette is still only showing the symbols located in the ptc directory\Common Files\text\sketcher_palette this is an example of what i am putting in the config.pro2d_palette_path C:\Users\username\Desktop What am I missing? Why doesn't the path or symbols that are available changing as expected?
Hello, the unbend command in the attached file fails. Can you help?
Hi folks, I am quite new to Creo so please this might be a very silly question. I am using Creo 8.0.How do I change colour of a part in a section view?In the 'model' mode, when I create a section view, the section face of the part is different from the original model colour. Can I change the colour freely or there's a default colour? If this is not possible, can I change the colour in a section view on the drawing? Thanks indeed!
I am trying to use the Creo Simulation Wizard. I am running into a problem with the domains. I am trying to select my singular part as the solid domain for external fluid flow but it will not select it and will not create a bounding box. Any ideas what I am doing wrong?
How to arrive Centre of gravity point in overall vehicle (Tractor/Car) layout.Available data are1. Wheel base/Wheel Track2. Tyre Details3. Over all vehicle layout cad assembly/parts (In virtual only. Not physical)4. Overall weight of the vehicle Front and Rear reactions are not available.I am using CREO-4 parametric. Kindly suggest to find the COG point in virtual layout assembly.
I am using Creo Parametric Release 4.0 and DatecodeM150Pro/Library: is it possible to include more columns using *mnu files in addition of Name, Description? We would like to see more columns bases on existing parameters. See picture files attached.
I am having no luck in applying servomotors to mechanisms. I have done it in the past but either I Am missing some step or creo is not functioning. Using manufacturer supplied assemblies was my first thought for source of failures. so I manually redefined the piston to the cylinder. no luck. Then I made a super rudimentary piston/cylinder assy. nope. I can drag the piston and the limits work as intended in the model. However, in mechanism, I can only get a partial move then it fails with errors. error msg with 2 servos: All position constraints can't be simultaneously satisfied. The following position constraints can't be satisfied:1) Servo motor constraint for servo motor Motor 1 in model 62205K194_NO_THREADS_HYDRAULIC_ can't be satisfied. 2) Servo motor constraint for servo motor Motor 2 in model 62205K194_NO_THREADS_HYDRAULIC_ can't be satisfied. or with a single servo:All position constraints can't be simultaneously satisfied.
hey everyone,i am having issues that i hope someone can help with. when checking an older iteration or revision of an assembly, the items underneath have updated to the latest version, despite the copy not having revision n+1 at the time or a completely different part. i understand this might be because i didn't have the workspace cleared but in essence, how would i open/ check an older iteration without needing to clear the workspace/ new workspace each time?is there also no way to force an exact revision for everything in the structure tree?
Hi there,I'm trying to import all the family table data and customize the table by changing some columns in front and back. is there any way to control or call the table from model to drawing and remove some columns by using any command or mapkey or config or macro anything. please help me out for this.
Dear all, Can anyone describe me the steps to perform dynamic time analysis
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.