Recently active
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders. Mechanical engineer in consumer electronics manufacturer.2. What version of Creo Parametric are you currently running? Creo 73. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. It would be great if the recent files list in the file tab would be context sensitive to the current workspace. So that when you change workspaces, the list changes to the most recent files you worked on WITHIN that workspace. Then, when you're jumping around between projects, you can just open the first file in the list. Helpful when you've opened so many files in a workspace(s) that the most recent from the current (desired) workspace is no longer in the list.4. What is the use case for your organization? We have many concurrent, active projects, and shifting between them could be easier if the application remember
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Hello I am Kamlesh Kailas Joshi from GMMSPL (one of the value added reseller of PTC)2. What version of Creo Parametric are you currently running?I ma currently using the Creo 8.0.3.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. Is there any scope in the Creo where model orientation like (front back top bottom left-right) need not be created separately, it should automatically create by using the csys available in any file like step iges parasolid?and addition to that I am seeking for the solution where I can activate the csys so that my model orientation should behave as per the activated csys. (I have seen this behavior in Cimatron software which is tooling software.4. What is the use case for your organization?It will help the designer to visualise the model more freely as per the cs
Working with Creo and Windchill, you could have an assembly with a family table instance not verified:I would like to have a column in the Model Tree with the values of 'Verification Stataus' in order to know that I am working with 'unverified instance'.Config option verify_on_save_by_default yes helps you to verify before save, but I want access to the parameter 'Verification Statatus' from Creo, because it could be that this component is not new, was created by other user and now has 'released' Status in Windchill...Thank you very much
.UI files are mode specific for the model tree settings.We'd like to have more control over what is stored in the .ui file and have it overlap f.e. part/sheetmetal Mode.See the printscreen below for an example idea. Reffering to Article - CS364444 - Import setting files .ui works for specific mode only even when setting Import for all modes in Import Tree Settings File window with Creo Parametric (ptc.com) Alternatively,perhaps it could be more specifically mentioned in this menu: 1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Not industry specific2. What version of Creo Parametric are you currently running?Since Creo 6 up to 7/8/93. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.The amount of .UI files to accommodate custom modeltree columns is doubled/tripled since the move from .cfg.4. What is the use case
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Mechanical Designer in metering technology. 2. What version of Creo Parametric are you currently running?Creo 7.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. Adding section arrows to a view that has a break in it seems impossible or disallowed. It would be greatly beneficial to utilize broken views to display section arrows of another sectioned view. Workarounds for this feature have included sketching the arrows over the broken view. Or placing partial views with the arrows over the top of your broken view and then blanking all components in partial view. However none of these solutions are desirable as they will either not regen if the section/scale is changed or, they will not update position placement on broken view.4. What is the use case for your organization?To create better
Hello All, We are using ECAD-MCAD collaboration at our company where we use Creo 3.0 for MCAD and and Mentor for ECAD. Copper information on vias, copper pads, planes and traces are supported on the Mentor side, however it is not supported on PTC within IDX. This is very much needed feature to bring holes in MCAD so that it can be used for editing or creating new features in Creo and also to make them visible on drawings. Request you all to review this Idea and vote accordingly. Thanks in advance.. Regards, Ravindra Mane Honeywell.
When placing a fitting on a pipeline, the prescribed method of fitting placement is more than suitable to locate and configure a fitting on its respective pipe line. When redefining a fitting, it gives you the option to redefine a point and change the orientation, which only allows you to "flip" the fitting along the pipe axis around a center point and or rotate the fitting around the aforementioned pipe axis but not adjust the distance from the plane (or change the reference) that was the initial datum for originally locating that fitting. For instance, if you have placed a "Tee" fitting in a particular location using a surface as a reference, and due to a design change, the designer is required to place a check valve before the "Tee" fitting, currently in Creo 4.0 you would have to delete the "Tee Fitting" and replace it at the required distance. This creates major problems due to the fact that prior to
It would be useful to have an config.pro option to registrar the Windchill server and activate it.WINDCHILL_ACTIVE_SERVER_URL https:\\*** In "How-to-register-a-Windchill-server-for-launching-Creo-4-0 , ysinitsyn suggested to use the web_browser_homepage option to show the Windchill environment. This option doesn’t activate the server and, in our case, it is already used for our homemade homepage.
Allow Cosmetic Sketch to be Wrapped. Currently NOT available in Creo 4.0 M030.
Error messages are written to std.out for assistance in determining problems, which is not possible to determine when we do not know when the error was written to the file. If there were a timestamp provided with the error, we could correlate that time with a user's performance problem or network performance issue. These errors need a timestamp to be truly useful: Connection restored with License Server(s) Warning Licensing error: Excessive reconnection with License server(s), detected.
When you want to save the status of the model tree you have to toggle to the layer tree, save the status, and then toggle back. We should be able to right click in the model tree to a drop down menu and save the status there.
Please re-implement exporting models as STEP through Creo Distributed Batch using a selected Csys in Creo 4.0. This functionality available in ptcdbatch.bat from Creo 3.0. See https://www.ptc.com/appserver/cs/view/case.jsp?n=13917824 (C13917824.pdf attachment). Martin Hanak
With the config option "web_browser_in_separate_window" set to "yes", if you minimize the browser window, then toggle it off, then toggle it back on, it reappears minimized. I propose that it reappear restored, instead, because toggling it on implies an intent to view it.
When a note is added in an Annotation Set, this note should be displayed only in this AnnotationSet, not in all the viewables, as it happens now. The attached -pdf explains the problem. Best regards, Nekane Peña
For machining allowances, a definition of the values for each section of the turning profile is possible. This is currently not possible for the feeds. However, the current procedure with CL commands has several disadvantages. In the definition relative to the tool movement, the position of the feed changes with each change of the rotary profile. The definition relative to geometics is very tricy for single profiles. In addition, it is difficult to catch edges. It should not be too complicated to implement this feature, the logic is similar to the dimensions.
Reduce the time required to hold the right mouse button down for the menu to pop up. Currently you have to hold the right mouse button down for a certain time for the menu to appear, while the new quick menu pops up with a quick click. Make the right mouse click work like the quick menu, where a simple click (hot click and hold) will pop up the right-click menu.
Creo Parametric 4.0 is able to open native Solidworks files. Sometimes Creo fails and Displays the message "Error Model name '....SLDPRT' contains unsupported characters. ... cannot be retrieved". See also CS233522. The implementation should be improved. Any character that is valid in SolidWorks should be supported.
We have found two cases where performing certain actions from Creo doesn't respect OIR's, Lifecycles, or Preferences set in Windchill 1) Baselines created on checkin do not use OIR's for baselines, and seem to be hardcoded in with no way to change this or turn off. 2) Sharing to a project on the fly doesn't respect the "Share to Project" collector. I am sure other users can come up with many more instances.
Currently, the mass properties file is unusable in a spreadsheet. The format is limited to a width which does not allow enough space for all of the columns. This causes the columns to wrap and the data in the rows is then wrapped making the content impossible to parse. Unfortunately, the Mass Properties file is the only place that reports the placement of components IN ASSEMBLY COORDINATES. Reading this file is a crucial step in getting the component position information into downstream systems such as Windchill. Here are some other features it would helpful to have as well: Ability to select the csys from which all of the COGs are calculated. Ability to choose the units. Include all models. (Currently 0 mass models are excluded as well as others) PTC, please allow the configuration of the mass properties file and a .csv export option, so that it can be used in spreadsheet programs and so that your own product, Windchill, can read it.
I'm working as a technical editor / marketing guy and I happended to stumble uppon one big hurdle when I started working with creo Illustrate. I can't export vector formats for print. SVG is meant to be used for Web/display and therefore doesn't work for print. Shure it can be converted but that really messes up one's workflow. Can we have .eps oder .pdf (but containing vector information) export in a future release? This would be a great step forward - the results look great so the only thing holding me from using them directly in my publishing software is that ther is no file format that allows me to directly import them and keep the vector files.
Recently, we are trying to encourage product engineer and tooling engineer using Creo View to communicate with each other by saving Markups in PDMLink. In the past, they did these work by using PPT through email. We find maybe Creo View can replace that old method, because markups and measurements can be saved and opened in PDMLink directly but not impacting the original 3D data. 3D model in Creo View is more readable. We can also review the communication history clearly in PDMLink. But, it seems the markup is not very friendly to use in Creo View. For example, tooling engineer add one Shape like circle or Freehand line on the surface. When he rotate the model, the circle and that line always keep its shape in front of screen not attaching on the surface. This may make these markup lose their meanings in 3D environment. IS that possible to make an improvement for creating markups on specific surface? &n
Simplify library customization like Symbols (2D & 3D) and Stamps. Now It is very hard to do it. Furthermore will be usefull: the possibiliy to centralize these libraries like in Creo Parametric the possibility to use different format for 3D Symbols like *.prt, *.step. *.iges. Not only *.ol that is quite unknown!!
Add the possibility to edit text in mesure so users can delete or edit prefix (Diameter, Distance, Ecc. Ecc.) or add suffix.
Would be usefull the possibilty to show Item List in the figure like a table or similar.
Installing Creo View will replace any current application for the Creo View file extensions. Need a way to not overtake certain file extensions (like .tif) by an option screen.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.