Recently active
Hi, in the what's new for Creo View Adapter 10.1, it is stated that:SolidWorks – Support Assembly Feature, Flexible Feature & Virtual (Embedded) Components for Windchill Structure Visualizationhowever, in our current testing, Assembly/flexible features seem to work well, but for virtual embedded components this does not seem to be changed or any better than previous versions. It says that there is no extra config needed, so I'm wondering if there is a certain Windchill version that is also needed? currently running 12.0.2.21 and Creo View adaptors 10.1 - maybe 13.0.1 is needed?
hi,i am trying to add &todays_date in drawing sheet but the date is not showing instead of it shows only &todays_date
Someone today asked me if you can find out what specific hatch pattern that a component is using? I am at a loss. I'm on Creo 8. Just as an example on one of my drawings, I have whatever the standard hatch is, just iron. I personally don't care for my drawings, but I'm just trying to help someone out. On an existing drawing, can you interogate the hatch pattern and determine which one each component is using?
I retrieve model with ProMdlnameretrieve but I am not able to display it using toolkit. I used ProMdlDisplay but still it does not work it stays in active session but do not get displayed in window. What should I do?
1. Describe the ProblemWhen importing an EMN file into an already existing PCB assembly, modified components are deleted and reinserted later in the model tree. This happens even to modified components that have their changes declined. Any features that reference these components will fail due to the new order of the model tree as these components are now listed after the features.2. Are you using a workaround?Remove collaboration information from components that need to be externally referenced.3. What is the use case for your organization?Wires that reference a component on a board will fail because the components will be reordered to be after the wires.4. What impact does this problem currently have on your organization?We are trying to leverage EMN/EMP files to collaborate with ECAD/MCAD data but this holds us back from working quicker in our designs.
Many clients use 3DExperience for their new aeronautics program. It would be interesting to be able to open the 3DXML in Creo View. Best regard.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 8 and Creo 92. What is the problem?The "References" menu needs additional control options to enable efficient workflows. "Remove" and "Remove All" do not provide enough capability for large "reference sets"3. Are you using a workaround? If yes, please describe it.The only workaround is to do lots and lots of clicking.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.One example is if an annotation has references which get altered. Especially in an environment where semantic references are defined. Then is no way to only remove the failed references. The user can only remove ALL the references, or go through the list one by one. This issue applies within many contexts of Creo Parametric. Another example is if a large
i working with an assembly in that assembly i activate one part to put a hole. in that process while active command on, i did hid some of the parts of assembly. after exiting the activate command the hidden commands are not showing whats wrong with that please help me i attached the image i cant unhide the parts
Is there a best way to import STL or OBJ files (mainly used for 3D printing) in CREO Parametric?I was not able to get parts with a smooth finish by using the OPEN function, those little triangles do not translate well to a nice finished surface, they look really ugly and blocky after I export/save them using the Shrinkwrap option. Even on level 10 for Shrinkwrap they still look awful in the end! Wish they had level 100 in there...Is there a better way to obtain a CREO part starting with an STL or OBJ file?Thank you!(I really hope I chose the correct location for this message)
Hello, Looking for some help modeling an open pulley system using mechanisms. We have a door that is opened and closed via an linear actuator and a pully system. We want to model the pulley system accurately as it goes around the pullies to better understand chain length and actuator location. Big question is can you do this type of constraining in creo? No sure how to have the chain route around the pullies as the contact location will change as the door opens and closes. Any help would be great! Using creo 8.0
I am using Creo Parametric Release 6.0 and Datecode6.0.4.0 ProFeatureInsertmodeWithoptionsActivate Regarding how to insert an array, I keep getting BAD_INPUT when inserting an array feature.----------------------------------------------------Translated the content from Simplified Chinese to English using google translateBody - ProFeatureInsertmodeWithoptionsActivate 对于阵列如何插入,我插入阵列特征的时候一直提示BAD_INPUT- By Community Moderation Team.----------------------------------------------------
I am using Creo Parametric Release 8.0 and Datecode8.0.9.0How to get the length of a sweep feature through Object Toolkit C++?
Does anyone transfer Step files created using AP242 to a CMM? Having issues with getting the dimensions to transfer. GD&T will transfer as long as they are not attached to a dimension. We are using Creo 9.0.8.0. Dimensions have had Annotation Referenced added. Transfer is to a Mitutoyo MiCat software. We have transferred both Step and native Creo file with the same outcome. Not sure if it is a Creo or MiCat software issue.
It would be useful and efficient if you could: Load sub-assembly author states (combined views, simplified representation) when Open in New View from main assembly in Creo View. Current workflow: - Close the main assembly - Open explicitly the sub-assembly needed - Select specific author state = Combined view Regards, Domen
Article: https://www.ptc.com/en/support/article/CS266648 If we set the view display settings for drawings to be in "Monochrome", the MCAD Compare results are shown in only black. The compare results should be in the color selected, it has nothing to do with the drawing itself. Please help make this change. Thanks!
Old versions of Creo Illustrate allowed to use Callout template with label referencing attribute, for example Windchill Attributes, but the labels were editable. In new versions there is the mutual exclusion, or editable or referenced by attributes. It's a regression.
When using Creo View you want it to be as easy and intuitive as possible aassuming the average user doesn't have much 3D experience. So I think about measuring distance between planes you would expect the system to measure exactly that... Planes. So I think we should at least be able to set that option by default.
Issue: User's are confused with Measurements, Cross-Sections and Orientations in Creo View when the GNOMON orientation does not match a companies Start Part orientation which can be defined differently from the Creo Parametric default coordinate system. Vote for this idea to include a preference or setting to re-orient the GNONOM coordinate system in Creo View to be capable of matching the Creo parametric start part. Reference this topic which discusses the Creo Parametric Start part definition of Coordinate systems. https://community.ptc.com/t5/Additional-Creo-Questions/Reorientation-of-the-coordinate-point-xyz-planes/m-p/252517#M21932
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use modelcheck to Check that there are No Assembly Cuts with automatic update intersection. The automatic update intersection capability can drastically reduce performance and regeneration time.
Change the dimension to be entered to be the full height of the beam section as usually given in shape/section data tables. The entry of web height only (inside flange to inside flange), and the on the fly math is irritating. Better still, enable the selection of sections from the AFX data as an option as well.
Frankly I didn't think I had to post such a trivial idea but I do: Please make undo-redo possible within piping environment. Maybe too easy...
It would be very useful and save a lot of time to have the ability to use the Fill tool within the IDD environment as is the case with the Boundary Blend. Currently (Creo Parametric 7) to create a planar surface you need to create it after the Import Feature and then use the Collapse tool to insert it into the Import Feature.
If the imported part is symmetrical and the import error occurs on one side only, using the mirror can save a lot of time by deleting the wrong side and mirroring the correct one. Currently it is not possible to mirror surfaces inside the Import Data Doctor.To mirror a surface, you need to create a Mirror feature after the Import Feature and then use the Collapse tool to insert the new surfaces into the Import Feature. It would be better to perform this operation inside the IDD, without going in and out of the Import Feature.
If you are the true Creo User then you may like to have keyboard shortcut for rotate and panning. It will help those designer whose mouse of their laptop are not working and need to present some thing urgently.
A large assembly drawing can result in an equally significant file size for both the Creo .drw file and the generated PDF. We have already used simplified representations to do their part of the job in reducing the file sizes, loading times etc., but we are also looking into the Edge display quality setting. We are modeling 12 meter long plates, thickness around 7 mm, bent with a radius of 20 meters.In the model we experienced the need for the Edge display quality set to "High", sometimes "Very High" to have a correct display of attached parts. Low display quality settings make the parts appear to be intersecting, while in reality they are not. The effect on graphical performance of this setting seems not really significant. The 2D drawings of the assemblies and parts are by default set to have a HLR edge display quality set to Follow Environment. There seems to be no effect of setting this manually to a lower setting, even "Low" results in the same lines on both the drw and PDF. The f
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.