Recently active
Checkin comments for Illustrate c3di files need to added afterwards with a checkin in the browser. It would be convenient to have an option to add a checkin comment from Creo Illustrate.
Hi everyone, For the moment it's not possible to use this feature "invert selected parts" when defining animations or sequences. I think it will be very usefull to add this feature. Thanks, Regards
From Creo View version 5.1, when trying to display the lower hierarchy of the model tree, if the number of model trees to be displayed is too large to display, the model tree will scroll without permission. That didn't happen before Creo View version 4.2. Since it is not easy to use, I would like you to improve such a function so that it can be switched ON and OFF as an option.
The ribbon is minimizing constantly in Creo View 7.1 after restart. If none of the system tabs (e.g. Home, Markup, Tools) is displayed in Ribbons, but only the Common tab, Creo View automatically hides the entire panel, assuming it is empty. So far, the only approach that would address the panel hiding is to leave the Home tabs displayed (by context), and move the required icons there. Creo View doesn't save the state of the ribbon display, it's always maximized; but if there's no other panel except the Common tab, the whole ribbon is hidden. It would be good if there was a configuration option where the user can choose whether to make the Ribbon visible or hidden after restart.
I am very excited from new publishing options in latest versions of Creo Illustrate. Now we can for Pvz publishing attach custom RCP files, so I tried to use Creo Illustrate for building PVZ files with very low size to use it in Vuforia Studio or web sites. It works very good - I can reduce model size except 3D Symbols from Creo Illustrate.These symbols occupy most of the file size although these symbols are useless in Vuforia Studio/View. It would be nice to add publish option which enable to remove symbols (Creo Illustrate 3D and 2D symbols) for easy publishing.
CreoView should have an option to export 2D DXF. This would allow non-CAD users to create the required 2D exports to DXF. Currently this requires opening files in CAD and exporting- consuming time of an Engineer, while anyone who has access to CreoView should be able to export a DXF.
Hi everyone, for the moment we have only shortcuts available in Illustrate. It will be very usefull to be able to create and define mapkeys in Illustrate. Thanks, Regards
It would be interesting to find an easy way to translate in Creo IllustrateNowadays we need to export and import .xlf manually...In Localizing table we can double clic on the "translate text" cell but we can not change the text...
There should be some way to configure the Common Folders shortcuts that are available in the Open/Save/Import/... dialogs as new places for managing data are added. For instance, we have moved to OneDrive and SharePoint (with folders linked into OneDrive) and those folders are today accessible through the Folder Tree submenu. An improvement would be to 1) be able to add links to Common Folders in the Creo Illustrate setup/configuration 2) for users to add/remove shortcuts to Common Folders
Hello everyone The explode lines always protrude too far over the items, so that both explode lines seem to be in front of the item (see screenshot "before").I spend a significant amount of time to manually pull each end of the explode lines to a reasonable position in the 2D drawing (see screenshot "after"). I assume the reason is the white shadow, as without it the explode line would end exactly in the outline of the item. Is there any setting that can improve this situation ?I'm using Creo Illustrate 11.0 Thank you a lot in advance
Hi all,am I the only one who keeps losing 3D page sizes and line settings for callouts?I mean, I define a 3D page size and then create the 2D image. Everything is fine. But after saving, closing and reopening, this page size is missing. This doesn't always happen, but againe and againe. Sometimes more often, sometimes less often.In the same way, CI sometimes loses the line setting of callouts (white shaddow, line thickness).It is annoying. What could be so difficult about storing the settings securely in a database? Is there someone else havin the same problems? Best regardsRamon(Siemens Energy)
Good morning, I'm having a similar issue, the thread note that you are seeing is a note of a cosmetic thread, In the holes made with standard hole i can apply the note that i would from the .hol file but in the hole made with cosmetic thread i'm not able to understand from where it's taken and i can't edit.Even if in the cosmetic hole thread i'm selecting the same library of the standard hole with the "right " note i'm not able to obtain the result this i want. any suggestion? Thanks! Reference topic: https://community.ptc.com/t5/3D-Part-Assembly-Design/Cosmetic-Thread-Class-Issue-Creo-5-0/m-p/612900#M65730
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 10.1 ff2. What is the problem?When configure "Use tree columns" it is not possible to set labels for the inserted attributes, the attribut name is used as column label.3. Are you using a workaround? If yes, please describe it.No4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Using labels for the attribute columns would be much more user friendly as the attribute name is often not meanfull, e.g. "epmdoc_modifyTimestamp" can have the label "last modified"5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)The attribute names are very long, which also makes the column very wideThe attribute name does not have sufficient information content
I used to enter &model_name:d into the title block. We just upgraded to CREO 10. I tried adding the parameter to the drawing even.
My team has been working at solving this problem for ages and we can't seem to find a suitable solution. Our fab shop uses formed part drawings instead of flat patterns for forming sheetmetal; they require dimensions for bends to reference the apex of a bend. This is normally fine, but when it comes to joggles, we're not able to come up with a method that works for engineering drawings and our press operators. I've attached a simple part showing the desired dimension and the dimensions that I'm able to achieve in a .dwg. Has anyone managed to find a dimensioning method that produces the dimension in the attached "Model Example"?
I am working on a new illustration. When I open the illustration and drag/drop my items from the sBOM to the Item List, it automatically brings the items in by CAD location (First Image). This oparticular illustration has 67 items. Our company does out parts manuals in numerical part number order, so I have to resort the list by Item tag order (Second Image). Doing so, requires me to renumber the ITM list manually as I have found no way to do it automatically. None of the options in the Item List tab / Numbering group help. I must manually change the number down to ITM #1 manually, which in this case will take over 63 clicks of the mouse. The next item will take over 42 clicks of the mouse. I will have to click thousands of time to renumber just this one illustration. Does anyone have any info on how to get the system to do a renumber by Item Tag order? It would be a life saver. I put a ticket in on this a few months ago and it was ac
1. Describe the ProblemParameters in the Model Tree Columns dialogue are not sorted alphabetically: Article - CS434304 - Not possible to sort entries in Model Tree Columns User Interface accessed from Model Tree in Creo ParametricWe sometimes have models with more than 100 parameters.We already make use of multiple mapkeys to load model tree configurations, but sometimes those are not suited to a certain task, and you want to quickly change the parameters displayed in the model tree.Currently, it feels like you have to start a project to achieve what should be a non-effort.2. Are you using a workaround?If you know the exact name of the parameter, you can enter it in the Name field. If you don't know the exact parameter name/spelling, there is no workaround.3. What is the use case for your organization?Fast(er) information overview. Performance is bad with many parameters displayed in the model tree, so fast reconfiguration of displayed columns would be helpful.4. What impact does this
Hi, I am trying to implement a repetitive tasks that opens a listed drawing in a new window and exports it in a different format. and that it can be stopped during repetitive tasks. Work scenario) The repetitive tasks is implemented with a "for" loop, and the task of opening and exporting the drawing is temporarily implemented with the "EmptyWindowCreateAndDelete" function. use a window procedure to respond to the user to stop during the task. When the window procedure window is closed, the loop stops. This function is effective in loops. The TEST2 function works only with the loop without EmptyWindowCreateAndDelete, and when the user closes the window, the loop seems to stop in the middle. (view in My Videos) However, when used with a function that creates a new window like EmptyWindowCreateAndDelete, the window procedure does not respond to the user's click. (view in My Videos) Is there a better way to stop during the looping task, or is there a way to make the w
I am using Creo Parametric Release 5.0 and Datecode5.0.6.0 Does Creo support downloading models from two different Windchill systems in one workspace to simulate assembly and check for interference? Translated by the moderation using Google Translate ----------------------------------------------------------------------------------------------- Creo是否支持一个工作区从两个不同的Windchill系统中下载模型,进行模拟装配和检查干涉?
I am using Creo Parametric Release 6.0 and Datecode6.0.0.0 人脸3D网格模型绘制,网格边长大小一致且可调,网格的平面形状为四边形 需求:使用creo parametric 绘制人脸3D网格模型,网格边长大小一致且可调,网格的平面形状为四边形或六边形,厚度为40um Translated by the community team using Microsoft Translator The face 3D mesh model is drawn, the edge length of the grid is consistent and adjustable, and the plane shape of the grid is quadrilateral Requirements: Use Creo parametric to draw a 3D mesh model of the face, the edge length of the grid is consistent and adjustable, the plane shape of the grid is quadrilateral or hexagonal, and the thickness is 40um
As soon as I add "DEFAULT_CALLOUT_FORMAT_DATA" to the ISO.hol file, Creo 5.0.6 does not open that file and is not visible in hole dialog. I do not add anything else. Anyone knows why this is happening?
hole center mark not display after pvz export (MBD)
In MBD, for dimensioning Axis selection is not possible in TOP view combined state but possible in FRONT combined statefor TOP combine stateHole edge Selection (Not able to select axis as reference)for FRONT combined stateAxis selection ( As reference) See attached images
In this special episode of Third Angle, we’re looking back at some of the innovative tech, toys and gadgets we have featured on the podcast. From model kits that contain life-like details of fighter jets, to ear buds with 360-degree spatialized sound, to top-of-the-range electronic keyboards, to interactive robotic toys, we are celebrating the future of gifting.
Is there a way to include the combination states of multiple subassemblies in the a PVZ export of the parent assembly in Creo 9?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.