Recently active
I want to quickly see location (on the hard drive) of the part I am working with. I work with big assemblies in different folders. Sometimes parts are the same. With Creo it's not clear. I looked for the answers. Suggestion is to edit config file. Is that really that complicated? And how to actually edit it? Looked at this http://support.ptc.com/help/creo/creo_optm/usascii/index.html#page/optm/options_modeler/fund_five_sub/Setting_config_pro_Options.html They say go to Tools > Environment. But I don't have that menu option. Your help is highly appreciated!
Sometimes you need to clean up CAD data before sharing it with a third party or you would like to update Start parts templates and remove old PDM parameters. You need to Set config.pro options: dm_emulate_ilink_sys_parameters=yes allow_create_pdm_param=yes
I want to convert part/assembly file into pvz file with custom proepview.pvr file, and i don't have a permission to change anything in "C" drive so i was planning on setting it up in a other drive but i cant find any specific setting/config... so is there any option available to set configuration for your custom recipe file??
When I create a new hole in a creo model, is there a way that I can default to "Type - Standard" and also have the "Size - Thread type:" already looking at the correct .hol file? Right now it defaults to "Type - Simple' and "Size - Thread type: ISO" Thanks for your help!
Discover how Skarper’s ultracompact clip-on disc drive turns any bike electric, combining sustainable design with Formula One-inspired engineering for urban riders.
Possibility to set “Shade” or “Shade With Edges” for drawing views section.General or detail views, parts with their color. see idea 1313.Possible with SW and Inventor.
Hi everyone!I need to copy multi Holes as in picture. I'm using Creo Elements/Direct Modeling 20.7But, I didn't find out the Pattern or Multi-Copy function.Could you Instruct me the step or Document to take?Thank you
Hello, I need to download Creo Launchpad Free Trial. I entered the launchpad form on Thursday and it has been 2 business days since I have done so, so I need that downloaded ASAP. Thanks
It seems like the stock table does not consider AFX created plates, only beams. Is this correct behavior?Another thing I wonder is if there is any possibilities to export the stock length info from the model itself to a text format, so I don't need to go through a drawing to get this information?Thanks!Regards Yngve(Creo Parametric 11.0.4.0)
Goal: One drawing format which will populate specific data and not matter if the drawing model is a single part or an assembly. Using a repeat region I am trying to pass model material along with a few other items into a title block. I can successfully make this happen byUsing 2 different formats so the repeat region calls outmbr/ptc_material/ptc_material_nameasm/mbr/ptc_material/ptc_material_nameUsing 1 format, but making all drawing models assemblies so that the item 2 always is present.Is there a way to use repeat region relations in order to have a single format with a repeat region which works if the drawing model is a part or an assembly? I'm not sure if it is even possible, or if I simply am having an issue with syntax and formatting.
Hello Community, We have many parts that were created in an old version of Creo when there was no multi-body function yet.All of these parts have the color assigned to the part level.If I now change the material, the new material color is assigned to the body level.However, the old part color remains in the model.When I export a STEP file, the old color of the part is used and the new color of the body is ignored. Yes, I can manually delete the color from the part level, but that takes a lot of effort for each part.Is there a way to automatically remove the part appearance color from all parts?Or is there a way to apply the color to both the body and the part when assigning the material? Thank you!
To support a template based product development it would be very useful to copy creo elements direct modelling EPMDocuments with the save As functionality.
I've got to step 4. Once I paste the product code I see the success message but within the license source it shows an error symbol and says invalid format or file and doesn't let me click next. creo 12.0
I would like to know best way to create .nwf file from excel file for creating cabling through logical data.
1. Describe the ProblemCreo Parametric provides an analysis feature "Measure: Area" to measure the area of a projected surface to an assembly. With the help of PTC support it was confirmed that this calculation deviates far more than the expected value of 0.15% as published here. We require a more accurate estimation of projected areas to meet our engineering needs.The deviation is evident when using the Shadow Analysis feature, as demonstrated with a sequence of spheres: even at the highest accuracy settings, the projected area is not calculated precisely.This inaccuracy stems from the calculation method (documented here). To calculate the Projected area of an entire part, a 1000 by 1000 grid is used for the calculation. In contrast, a numerically precise result can only be obtained for single Creo areas. Proposed Solution: If the current grid calculation scheme is retained, allow users to select between a “standard grid size” and a “manual grid size” for projected area calc
After a month of experimenting and testing stability for PTC Creo, I would like to share my solution that will allow you to freely run PTC Creo on your Mac 😊Tested Requirements:These are the requirements that I have personally tested, any other version/device may not work similarly.Tested VMware Fusion Version: 13.6.4Tested 64-bit ARM Windows 11 build: 26100.4349Tested Mac Devices: Mac Mini M4 (24GB RAM), MacBook PRO M1 Pro, MacBook Pro M4 Pro, MacBook Air M3.Tested Creo Releases: Creo 10, Creo 12Tested MacOS Operating System: Tahoe 26.0.1Installation Steps:Download the latest 64-bit ARM Windows 11 build, or better, the one I listed. I sincerely recommend CrystalFetch app (it's free) for getting the ISO file. Create a new Virtual Machine on VMWare Fusion with the previous ISO.Install your Windows operating system, update it, configure it to your liking, etc...Make sure that in your VMWare settings you have enabled the following:1) Settings -> Display -> Accelerate 3D G
I have been trying to follow some previous discussions on creating a tube profile, but haven't had any luck: https://community.ptc.com/t5/3D-Part-Assembly-Design/Creo-4-0-Framework-custom-tube-profiles/m-p/675536 https://support.ptc.com/help/creo/creo_pma/r7.0/usascii/#page/advanced_framework/About_Saving_Advanced_Framework_Customizations_Outside_Installation_Directory.html# Following the instructions, I have copied the customization folder to a network drive, however I noticed that the customization folder did not contain the three sub directories (*see attached) as mentioned in the instructions--they were separate. I tried dropping them into the Custom folder on my local copy.After making a copy I tried two things: 1.)making a new folder directory and then copying and editing an existing profile2.) adding a size to an existing profile neither has worked. I have mapped the customization folder in the afx options with no luck. I have also tried
Current version: Windchill 12.1 with Creo Elements/Direct Modeling 20.7 When using CED Modeling in combination with Windchill, it is possible to show Windchill attributes in the structure browser through structure browser views. It would be great to have these attributes also shown in the tooltip when hovering over a component (instead of showing the structure browser path of the selected component) in order to have more clarity/information when navigating the viewport.
Hello, is there any possibility to read files from network drives? try { print(readFileAsString("\\\\10.170.84.24\\Standard\\ProE_standard\\Relace\\Relace PRT.txt")); } catch (e) { print("FAILED: " + e); } I need to read fresh relations so all models actual relations. The only one place in our company provides relations is network drive.
Hi, Can someone help me to create a relation in a bom to change a parameter to another number for cage_code? I have something at the bottom of the relation in the bom table that is obviously incorrect. I have attached a simple drawing in creo 8. If you can perform the task and return to me then I will understand how it is done. Should only take a guru less than 5 minutes. Wayne
问题反馈:Creo tf_a4.frm 模板工程图 start 定位注释消失致 SVG 导出 BOM 偏移问题现象:使用 tf_a4.frm 最新模板制作带爆炸视图的工程图,为满足 SVG 导出需求添加「start」定位注释符号;执行【工程图保存 + 关闭 + 拭除未显示】操作后重新打开图纸,会触发系统弹窗警告,无论选择「继续」或「审阅」,添加的「start」定位注释均直接消失;最终导致该工程图导出的 SVG 文件中,右侧 BOM 清单位置出现偏移,无法正常对齐
Bonjour,Je suis un ancien employé de PTC et j'utilise CREO dans un but purement distrayante sans aucune intention commercial ou industriel . J'utilisais la méthode "Request activation key". Cependant cette méthode génère maintenant un code error 520 et je n'ai plus accès á CREO. Merci de votre aide Victor Lopes
I am using Creo Parametric Release 8.0 and Datecode8.0.3.0I used CREO Distributed Batch to run DXF export mapkey task but keep failing, I've confirmed there is no any Creo launch initialization dialog box pop-up when running CREO client and I tried both default export task type and my mapkey they all failed. I don't see any log file generated. I ran my mapkey manually and it did work successfully
When zoomed into my model, I am noticing significant lag when panning, rotating, and trying to sketch. I did not see this issue previously when using 11. I updated to 12 due to an update of my graphics card but I am still editing a file created in 11. I haven't used Creo in a while, but I don't remember it being like this.The image shows how far away my sketch cursor is from my mouse. After a bit the sketch cursor catches up. Is this behavior normal?
1. Describe the ProblemI would like the ability to get the xyz location of a surface/plane and a directional vector or axis. I currently use ProSolidRayIntersectionCompute to find an intersection between a surface and ProRay. This works fine where the ray passes through material but if the ray happens to pass through a hole, an intersection cant be found. I would like a function where you pass in something like a ProVector and surface and get the xyz location of the intersection between these.2. Are you using a workaround?My current workaround is: * Create a point using a surface and an axis as references. * Get the location of this point * Delete the point This only works if I happen to have an axis. I don't have a workaround if no axis exists.3. What is the use case for your organization?I use ProSolidRayIntersectionCompute to find locations to create holes. if I want to update the location of these holes based on a set of new rays ProSolidRayIntersectionCompute can not reliably
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.