Recently active
It would be good if we are able to visualize different combine states in single window, which will help to understand the different dimensions of single feature as well as gives better understanding of component. That would be ideal when we are using 3d drawing. Other wise we have to go again with 2d drawings, which give all the views and dimensions in single sheet. Same will be applicable for taking print outs of the combine states. If we are not able to take printout in single sheet then we have to waste bunch of papers even a small components.
At the moment it´s possible to edit a rounding of an edgefold (f.e. 90degrees) in sheetmetal with flexible modeling. With this option you can realise a clinch situation. Please make this feature accessible for 180degree edgefolds in sheetmetal
I have used this function in other CAD software and found it very useful. It allows you to work and orientate your model in perspective but once you select a view 'normal to a face' or select a front/side/bottom/etc view, then the graphics automatically switches to orthogonal rather than perspective. As soon as you rotate/spin the model the graphics automatically changes back to perspective view.
Hi everyone, I think all we Creo users would appreciate a config option like unexpected_system_crash_behavior with possible values always/sometimes/after eight/never to drive Creo crashes the way we prefer them... 😉
Currently if you add a user defined column in the .hol files the only way to get the parameter to show up in the hole note is to find out what the feature ID is and manually for every single hole note update it with something like &HELICOIL:FID_629 where 629 is the feature ID. I want to be able to add a column called Helicoil (or any other parameter) in the .hol file and then to be able to call out &Helicoil in the note format without requiring that the user update every single note with :FID_
I would like turn on/off some X/Y axis of coordinates associated with the mouse pointer. This capacity already exists in AutoCAD and other 3D software. Allow you to quickly check vertical or horitzontal alignment between two entities: parts, circles, views or whatever. It could be useful in any context: drawing, part, assembly and sketch... see the attached picture. Thank you
Hello I wanted to tell about the experiences with the new Render Studio update from Creo 4.0 onwards. While realtime rendering is a nice thing, sometimes it is just much more practicable to stay in normal graphics mode to work more fluently and then render only a portion of the display to see certain shadow or lighting changes on that one special edge, that is important. With the old render functionality that was possible. Now to really see the end result of what will be my rendered image I have to Render the whole image in the desired settings, which costs me at least 20 minutes or more every time I just want to specifically see the changes I made with the Light set up. Please reintroduce the possibility to Render only a desired portion of the screen. every User of render applications will thank you. Best Regards Daniel
description: the file format of the variant specification definition (.vsp) is binary. picture: variant specification & binary data content solution: make the .vsp data public or ASCII. Maybe with implementation in Thing Worx
Enhance the Toolkit API to allow additional status icons in the Creo model tree, or be able to change the appearance of the Creo native icons to show custom status or other data conditions.
Enhance the Exterior Components search to search for only models that are x% exterior. Some components may have only a small face shown/visible to the exterior side. Being able to search for components that have 10% or 20% (editable %) minimal exterior geometry would enable usage of this search category to create Simplified Reps, where you really need to reduce the assembly to high level exterior components.
Currently if you want to create datum features based on copied geometry in the skeleton to help in creating your model files it would be nice to keep those datum features in the skeleton and not clutter your main model tree. The only problem is that when you try to use them in the main model to help create or place components CREO will allow you to do it without complaining. It's only when you realize your having model performance issues due to that you ending up creating circular references within your assembly because skeleton and model files are apparently treated separately even though the references are contained in the same model..It would be a nice to have that feature. Or at least a warning letting the user know that you just created a circular reference.
Hi, The "extrude cut" function (in top assembly) can remove the solid material from all the components at assembly level. - --some solid component will be fully cut, some will be partially cut depending on the cutting sketch size. I want the similar function "extrude cut" on quilt (surface) for all the components in the assembly level also. ---Some quilt in the component can be fully cut, some can be partially cut.
In Creo Parametric, Datum Target Annotation may choose Target Area Type from "Point", "Circle", "Rectangle", or "None". I contacted support, but such API is not available. Please implement ProDatumTagetAreaTypeGet() API.
Allow choosing which sheets to save when using Save As in drawing. Right now we have to make a copy of drawing and then remove sheets that are not needed. Currently: Save As makes copy of entire drawing Enhancement: Give Save As options to choose which sheets to save and which to drop. Example:
MBD does not allow you to have a formed part and a flat part within the same model using simplified reps without giving errors for annotations. Also Creo does not support this to be exported out to a PVZ file for the Mfg floor to with all states of the part. Creo has designed simplified reps to be allowed in assemblies for exporting. We are a very large company that was sold on MBD for Sheet metal, but it does not fully work if we cannot use simplified reps in the parts and export both the formed and flat states out to a viewable PVZ file. We would like to have an enhancement created to allow a formed state and a flat state in the same model to be exported out to PVZ.
In Creo session linked to Windchill, when changing the Workspace, it would be very useful to display the content of this Workspace. Currently, after the activation command followed by confirmation of the activation, the activated workspace content is not displayed. The previous inactive Workspace is displayed. You must click on the Workspace a second time to display the active content.
It would be beneficial to have a button to add a family table instance to drawing. At the moment there is "Add Model" button in the menu manager but this requires user to browse first the generic part and then Creo lets user to choose the instance to be added to the drawing. This would be particularly useful with sheet metal parts if a flat instance is needed to the drawing as an informational view.
The model DTL file has a setting called "default_tolerance_mode". This setting controls the tolerance mode for both created annotation dimensions and the feature dimensions (the sketch dims, driving dims). For MBD it would be helpful to be able to control the tolerance mode independently for feature dimensions and annotation dimensions. Maybe a new DTL option called "default_annotation_tolerance_mode" that would apply to created annotations while the existing setting "default_tolerance_mode" would then apply to just feature dimensions. The reason behind this is that for MBD created annotations are used almost exclusively and it would be desirable to have the created annotations have a tolerance by default while the feature dimension would not have a tolerance.
It would be desirable - to interrupt axis- to shorten/extend axis by dragging the ends in the same way you use it with extension lines.
I mean the possibility to reorder the analises within the model tree. Now the order is chronological but often you make analyses that are similar, with only few changes, in different instants and so happens they aren't one after another. But, for a better mental order, it's convenient reorder them to have "a kind of group of similar analyses". ThanksBye
Hello, In a transient thermal analysis, for a boundary convection condition, give the possibilty to users to combine temperature dependent convection coefficient and bulk temperature dependent to time. Actually, when we try to define in Creo Simulate a such boundary condition, "Creo Simulate" give us the following message (see please the JPG file) Thank you in advance Sidi
3D Thickness control analysis for complex models can take hours, sometimes even days. It would be nice if this time could be reduced and of course the parallel calculation could help (even if the best way would be to reduce the complexity of the algorithm that performs this function ...)
It will be great having access to replace unrelated component funcionality using OTK/PROTK Nowadays do that programmatically will require a lot of work, specially if the component you want to replace is a missing component, while do that using replace UI is a really simple and straightforward process
I mean the possibility to put special items on the geometry that can start actions like forces, motors, ect....It would be a more simple way in relation to the current ways. ThanksBye
When import the attached model after exporting it in the STEP format, the surface of the model is divided without permission. The customer wants to improve so that the information of the exported model is not converted arbitrarily.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.