Recently active
Good morning, I'm having a similar issue, the thread note that you are seeing is a note of a cosmetic thread, In the holes made with standard hole i can apply the note that i would from the .hol file but in the hole made with cosmetic thread i'm not able to understand from where it's taken and i can't edit. Even if in the cosmetic hole thread i'm selecting the same library of the standard hole with the "right " note i'm not able to obtain the result this i want. any suggestion? Thanks! Reference topic: https://community.ptc.com/t5/3D-Part-Assembly-Design/Cosmetic-Thread-Class-Issue-Creo-5-0/m-p/612900#M65730
As part of our migration to Creo 8 / Windchill 12, we came up w/ smart formats fed by parameters in our new start parts. When we have a new part on a new format life is ezpz. However, if we have an existing part w/o the required parameters things get complicated. I came up w/ a mapkey to add the needed parameters to the existing part that works well when we want to put this part on a new format. Problem lies in a relation we have in our new start parts. It's the one below that sets the value of the MATERIAL parameter equal to the value of PTC_MATERIAL_DESCRIPTION. Each material has a defined description in it. /*This relation sets the material parameter equal to the material description thru a yes/no parameter IF (USE_MATL_DEF_DESC)==YES MATERIAL=material_param("PTC_MATERIAL_DESCRIPTION") ENDIF /*This information needs to be pasted int
Has anyone taken the Creo Certification courses, and if so, was it worth it? Do you maintain your certification once you've earned it? I primarily work with "complete machining" extension. I've been using Creo since 2012, currently on Creo 10. I did a lot more modeling back when I started, but now we receive models from the engineering group and I use them to program the manufacturing. I did go about reaching out to Sales about the associated costs. My fear is that the courses are sort of entry level and will be a waste of my time. It appears that it may be an opportunity to see some of the work with the High Speed Milling extensions without having to purchase those licenses. Anyhow, I'd appreciate any input on how other's experiences have been with these certification courses. Thank you,Matt
I am using Creo Parametric Release 11.0 and Datecode11.0.0.0Unable to add transitions or multiple radius values when using the D1 x D2 conic option.
When exporting a cad model as a PDF U3D I select to export annotations and parameters in the content tab however when i open Adobe Acrobat reader, I cannot find the parameters. There is a side section that has property and value columns but no which part I select those columns do not populate. Where are the parameters?
1. Describe the ProblemToday, the plybook creation creates (very quickly by the way, kudos to the developpers for that) one page per ply showing different information about each individual ply. In particular, there is a "placement" view which help locathe the ply in the overall component. Some customers use to create "chapters" in their plybooks to give an overview of the next phase of the draping. Those implies to be able to create an additional drawing page for which they will select multiple plies/cores to be displayed in a single view so the worker has a global understanding of what's coming next. The suggestion here is to be able to selected multiples plies/cores in the view definition.2. Are you using a workaround?Today, there is no way to do it properly. The only workaround is to create multiple views (one per ply/core) and superimpose them. 3. What is the use case for your organization?Enhance the quality of the shopfloor deliverable by giving them a better
1. Describe the ProblemWe are creating a master template for both CAD and CAM in the Creo. The idea is to change the master model parameters to get the different designs within a part family.Actually the tagging system works well for CAD models derived from the same master template in the interchange assembly, as they share the same IDs. However, it does not work well when it comes to the manufacturing inheritances. Even though all initial CADs share the same IDs, but their associated manufacturing inheritance surface IDs changed during the creation. This cause the failure of the tag creation in interchange assembly for those inheritances. As their surface IDs are no longer the same like their reference models.2. Are you using a workaround?We have reached out to PTC SME for help. He agreed with this observation. The current workaround we have is to manually create those tags. But this is a very tedious work and lean to errors.3. What is the use case for your organization?We are creatin
Hi,This message can also be found in the product ideas. Inseparables are used to show/save an assembly as part.Currently, while scanning the BOM an inseparable is handled as an assembly instead of a part.This leads to errors in the BOM list.- main assembly - part 1 - part 2 - inseparable 1 - part 3 - part 4 - sub assembly 1 - part 5 - inseparable 2 - part 6 - part 7 Setting "Scan Inseparable" = "OFF" (Anything located below an inseparable is used as BOM entry)=> OFF = The inseparable will be calculated=> ON = The inseparable will be ignored, parts will be calculated separate Current outcome SCAN ALL LEVELS:- part 1- part 2- part 5Expected outcome SCAN
I am having sketching problems when it comes to uniting even simple segments.Maybe my config.pro settings are off, but CREO 10 / Win10 is butchering even the simplest connections between an arc and a segment, or even between two angled segments.Is there a way to fix those red dots? Like uniting them together or something...No matter how much I magnify to see what the problem is, CREO still shows them on the same line, but in the end makes them red anyway!Drives me completely nuts!!!Maybe my settings are wrong, or not set up to snap correctly, but I do not know where to look.
I want to start to use the multibody in the sheet metal. But I need first to implement this feature in my drawing. On my drawing all my drawing, I have a table with the Radius, thickness, K-factor, and a relation that calculate the Outside Bend allowance of my part. All this information is useful for the production. I have try with a test with 2 body, I have insert the body specific information &SMT_DFLT_BEND_RADIUS and &SMT_THICKNESS in the creation of my table, But it only take the base body information. I have also try to add this &SMT_BEND_ALLOWANCE_FACTOR, but the table does not accept this info. And if their a way to have a formula that change with each body to calculate the OBD for 90º of the part. My old way to give the information still work, but only for a single body, or for a multibody part that are all Body linked.
I wanted to enable same numbering logic as Windchill OIR on File Name attribute in Creo while creating new object in Creo. With current configuration CAD Objects are creates e.g. PRT002.PRT as shown below : I already can create CAD object as per my define OIR as below : Please help me to get Windchill OIR configure to Creo to create CAD objects with same numbering scheme.
I am using Creo Parametric Release 7.0 and Datecode7.0.7.0I want to understand how to use the Find tool. If I look for Curve Features and leave an asterisk in the Value field in the Criteria section, the list shows a lot curves found in the model, presumably all of them. It looks like all or most of the curves start with F, like F103(BASE_CIRCLES). But if I type F* in the Value field, zero results appear.I want to understand how this makes sense. Because I want to understand how to use the Find tool effectively. I knew I was trying to find F103, but I didn't know the full name was F103(BASE_CIRCLES). How am I suppose to use the Find tool to find it if the asterisk doesn't work how it normally does? Am I suppose to read through the list of all curves until I find the one I'm looking for? Surely that isn't the case.
I created a local section view on a model back view and I can't get the spline that demarcates the edges of the section view to show up. The spline only appears when I have the dialogue box open for editing the view. As soon as I close out the box, the spline disappears but the section remains. I would like the spline to remain on the view. How can I do this?
How can I write a nastran input deck from my creo simulation study
Hello all,is it normal for the line style (e.g. centerline) to change when you place an Inset? Can this be changed or switched off? I have placed a bolt with screw and centre line on a DIN A4 page size.When I insert an Inset B, the centrerline style changes. In addition, the line style in the Inset (zoom) is completely different. It is far too small in this case, although it should not actually change despite positive or negative zoom. And if it does, the distances should at least become larger (and not smaller) with a positive zoom. The line style: Placing a bolt and a srew on a DIN A4 page size: Insert a Inset B with zoom < 1: Making the zoom >1: Can this behavior be changed? Best regardsRamon(Siemens Energy)
Hello, I'm an intermediate Java developer and I'm curious about how to use extrusion and other commands with the Toolkit class. I've gone through the documentation but couldn't find a clear solution. If anyone has experience with this, I would greatly appreciate your guidance.
1. What product and version are you running?We are using PTC Creo View 10.1.0.0 (MCAD and ECAD license) 2. What is the problem? Currently, PTC Creo View lacks the functionality to duplicate parts and bodies directly within the tool. This limitation requires parts or bodies to be added to the viewable from Windchill, or directly added to the session from a windows location, before any duplication can occur. This process is time-consuming and inefficient, especially when working with very large models or when needing to make quick modifications and concept developments. 3. Are you using a workaround? If yes, please describe it. Yes, the current workaround involves using PTC Creo Parametric for duplicating parts or bodies. Users have to export the models from Creo View, perform the duplication in Creo Parametric, and then re-import the duplicated models back into Creo View. This process is cumbersome and disrupts the workflow, leading to significant delays. 4. Wh
Hi everyone, I stop using Creo after 22 years and want like to share all my training videos (with practice parts) to Creo community. You can watch it for free on Youtube. I created the playlist as below - Creo 3.0 Essential - Creo 3.0 Advance Drawing - Creo 3.0 Mold Design - Creo 4.0 3X Mill - Creo 6.0 Essential (90% same with Creo 3.0 Essential) - Creo 6.0 Product Design - Creo UDF & Family Table - Creo Tip & Trick (Part 1) - Creo Tip & Trick (Part 2) - Creo Tip & Trick (Part 3) All video is in Vietnamese but you can find the summary of content for each clip in the clip's description. Sorry for this inconvenience Hoang Khuong
HI all, I got a bunch of quite complex sketches, that serve as gasket centerline in the part. to better see them in the skeleton model assembly, I changed properties of those sketches to a random, different than default appearance. then, as I wanted to go back to their previous style , I've drawn a new sketch and in properties of the sketch copied the style from existing and selected that new entity.result is far from expected, as now I have a line, that is visible the same in 3d, but in different color inside the sketcher compared to fresh sketch. Any tips in resetting the line style of entities that were changed to default style without the need to re-draw all of them again ?
Hello,I have been trying to debug this for a while and cannot figure it out. Was hoping someone here could help me.Creo parametric version: 10.0.4Creo Distributed batch version: 10.0.4 What I am trying to do: I have many part files with different names that are 2D curves. I want to export those part files to dxf without opening the files one by one and saving them. What I have done so far:I could not get the proper export of the part files to dxf without opening the part as a drawing first. I created a mapkey that opens the current part as a drawing template with the correct view and scale, then saves that drawing as a dxf. The mapkey works when run manually and does save me time.However, I wanted to speed up the process further by using Creo distributed batch to run that mapkey on all the parts. I have found a way to do this in theory using the mapkey.TTD option in Creo distributed batch. I opened the TTD as text and modified it accordingly so it would run my mapkey (-d
Dimensioning Creo 9 2D. Attach geometric tolerance to dimension. How does that work in Creo 9. Previously had Creo 7 Translated by the moderation using Google Translate ----------------------------------------------------------------------------------------------- Bemaßung Creo 9 2D. Geometrische Toleranz an Maß hängen . Wie geht das in Creo 9. Hatten vorher Creo 7
I have users that are having trouble getting start files. When creating new parts they only get the PTC supplied defaults. They also do not see the Pro/Library option when opening files. They are able to navigate to the Windchill templates manually and open so access isn't an issue. The config pro and sup being used are the same as every other user as they use a start up script. Windchill server is setup the same. We have tried clearing the windchill workspace cache and reinitializing the server connection. Any ideas?
As-is, the dimension sometimes pops up behind the measure dialogue box, it would be better if it didn't so you wouldn't have to move the dialogue box to find the measurement. Also, not having to hold the Ctrl key to select two items would be helpful. Another enhancement would be to be able to escape the measure tool using the middle mouse button.
Hello,I am looking for a way to calculate the number of unique component types (excluding duplicates) in an assembly and automatically display this value in a drawing using parameters in Creo Parametric.The goal is to achieve something like the red box in the attached image, where the number of unique components (e.g., ) is calculated and shown. If a part is used multiple times (e.g., the same part number), it should still be counted as one unique type.3Questions:How can I create a parameter that calculates the number of unique component types in an assembly?What steps are needed to insert this parameter into a drawing?Are there any additional Relation settings or tips required to make this work? Example Image Description:The red box in the image shows where I want the number of unique component types (e.g., 3) to appear in the drawing.I would greatly appreciate detailed steps or examples to help implement this. Thank you in advance!
Looking for documentation for the me10.ini file.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.