Recently active
Drawings with multiple sheets need a Table of Contents (TOC) - just like any other multi-page document. Report repeat region parameters would need to be established for just this purpose. A Table of Contents should be just as easy to implement as a Bill of Materials. A parametric Table of Contents would update any time a sheet is added, or is re-named or moved in sequence.
Creo 4 introduced: 1. 'Shown Items' layer enabling to show an item quickly, not having to search for the layer(s) it is in.2. AND it introduced 'hidden by layer is hidden in model tree as well' At least.. I thought this was the intent of the enhancement... appearantly not... Problem; Some items hidden by some types of layers are hidden in Model Tree, most items hidden by layer are NOT hidden in Model Tree; NO LOGIC there Problem2; As a result you need to go to layer tree and search for a layer with the item after all to RMB show the item (and make it 'shown' independent of layer status) Problem3; Items can be both is the 'shown items' layer and the 'hidden items' layer; BAD OVERVIEW
I opened a case with PTC, however this was closed saying it works according to product specification. Let me explain, what I believe is a bug or at least overlooked by PTC. When using config.pro option; Regen_failure_handling no_resolve_mode. Creo now has the nice option to see in the model tree the errors, these are also listed in the notification center, but this only works in some cases. If you create a simple model of a rectangle with two dimensions in the sketch, let's say Length and Width, then extrude for the Thickness. Assign each dimension to a parameter in a relation; Length, Width, Thickness If you pass a zero value to the Sketch dimensions, close the relation window and regenerate, the model will fail and show the errors in the model tree/notification center. If you pass a zero value to the Extrude (Thickness), close the relation window and regenerate, the model will NOT Fail. You will see in the message log that some relations are no longer satisfied, if you open the rela
We would like to be able to export a step file with annotations but without quilts. Currently when selecting annotations, quilts are automatically selected and greyed out so they cannot be unselected. A PTC support representative already explained there's no way around it using the standard options. Please make it possible to export a step file with annotations but without quilts. Currently when we want to send a step file to our vendors (mold maker for example) it includes confusing quilts which are a potential source for errors.
Hatch Pattern defined and visible under a specific Combined State is visible in a different Combined State after activating and regenerating the model in Creo Parametric 4.0 Case #1 https://www.ptc.com/en/support/article?n=CS294535&source=Case%20Viewer Case #2 https://www.ptc.com/en/support/article?n=CS270753&source=Case%20Viewer SPR 7819192 https://support.ptc.com/appserver/cs/view/spr.jsp?n=7819192
Unfortunately the words for "failure" and "success" in German Creo are of the same length and at the first sigth there is no difference in the result of the verification status in family tables (see attached picture "original"). The suggestion is to color-mark the words for "failure" and "success" in the verification status or to use symbols like a cross and a check-mark.
By entering an upper tolerance value of e.g. 0.05 it is displayed with "+0.05" on the drawing. Entering the lower value with "0.01" flips automatically to "-0.01" which is not the design intent. By entering "+0.01" to the Checkbox the value changes to "0.01" in the entry field when pushing the enter-button. That is confusing and causes mistakes in drawings and manufacuring. Suggestion1: Please always show the "+" or "-" in front of the value. Suggestion2: Please create an option to show the "+" as default in front of the minor value. (for those users to whom this is much more common)
I don't need this additional sub-assembly. So I always open first sub-level as top-assembly in order to get back to the initial number of levels in the model tree. It would be more convenient for Creo to open the STEP format file without the added level.
When having an embedded Mathcad document in the model there is a Icon in the graphic window that can be used for opening the document. Unfortunatley it will also create a new mathcad document that must be manually closed. The Icon only appear in the graphic window when there is an embedded document so the Icon should only open the existing document. (it is not possible to save more that one document in the model)
Hello, I'm using your company Creo Parametric and Creo Simulate at Yaskawa Electric in Korea. We have purchased and are using multiple copies of Creo Parametric Node-Lock licenses and one copy of the Creo Simulate Floating license. However, a very inconvenient thing is that you have to run it separately on your desktop to run Creo Simulate in Creo Parametric Node-Lock. Clicking on the Simulate icon within Creo Parametric will cause an error. Due to this issue, the time loss is very high in large 3D operations. Please solve it as soon as possible.
In Creo 4 there is a Mathcad icon in the Graphics window when a Prime document is embedded. It would be clearer if there was a Icon in the model tree that represent the embedded document and use that to open the embedded document.
Currently there is no way to interrupt a Creepage and Clearance Analysis without completely killing the xtop.exe process from task manager. If you make your mesh size too small, you may be running for hours with no access to Creo.
Assembly "repeat" function requires the part to be selected - most other functions are able to activate by selecting a single geometry from the part, Creo then assumes they mean the whole part in assembly mode. On a default geometry select "repeat" stays greyed out until the user selects the part (from model tree or through the mini toolbar) - this is awkward and not in keeping with other similar Creo functions.
At Progressive Die ExtensionI would like you to add a function for drawing die.· Blank creation function· Molding analysis function
Please allow drafts on warped surfaces. Currently we need to warp a logo since adjusting it in the sketch will deform the splines. However, we also need to draft the logo, which won't work on warp surfaces. Please allow for this. Thanks!
In my current version ( Creo 4 M060) it's not possible to relate a drawing annotation to the symbol of Datum target. It's possible to relate it to dimensions, other GD&T but not to single Datum target. It could be VERY useful. thanks
in a drawing containing several sheets, it would be interesting to be able to exclude some sheets from printing and foliage. Example: flat state, and internal data.
The same way we can mirror an entire sub-assembly inside of a top-level assembly, add the ability to copy a sub-assembly. I don't want to assemble it again, I want different .asm and .prt files with their geometry dependent of the original sub-assembly and its parts.
Hello everyone! You can use the "Combine as similar welds" command in the welding tool to combine single welds together, but you cannot do this for symmetrical welds or for two sided welds. Please add this function to this command. Regards, Konrad Cwierz
Il manque la fonction très utile VUE PAR DEFAUT Et la fonction Régénérer Si on pouvait la configurer à souhait
Gestion des éléments dans une couche. Avoir l’onglet de sélection des éléments directement dans la fenêtre couche plutôt que d’aller chercher un onglet en bas de fenêtre Créo
Trop de sous fenêtre à ouvrir pour l’esquisse ou l'édition d'une fonction. Tout rassembler dans une même fenêtre et lister par défaut les plans existants.
Actual, the length of the Custom CL Command data field in tool Definition is limited to 5 lines. In some cases, more than 5 lines are necessary here. Please increase the maximum number of lines. I Referee to Call 14687018 and PTC help database
Article - CS71125 Hidden line edge display is incorrect in assembly and related drawing mode for some edges while part display is OK in Creo Parametric https://www.ptc.com/en/support/article?n=CS71125We often make the assembly with intentionally interference because of the specifications of products.It is very hard to eliminate all the interference in order to output the drawing.
Currently PTC says this is working as they want it to... However, you can create a DFS in the model and place it on a dimension extension line inline with the dimension, meaning the datum plane is at the center of the feature and is a datum center plane. Now you show the DFS on the drawing, it shows inline with the dimension, however you can simply click on the DFS and drag it so it's not inline with the dimension. Now you have a datum that means something totally different than the model because the model does not update according to what is done to the drawing. PTC says this is how it is suppose to function. I have never come across a situation that you would want the model to have a single datum have different meanings between the drawing and model. PTC should update this functionality to make this parametric.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.