Recently active
The suggested CSYS will stay in the corner of the screen, separate from the spin center, yet will rotate as the model is rotated.
Creo Parametric 3.0 does not have a robust global CSYS that remains in the corner of the GUI to provide an orientation context for the model. Many CAD systems already have this, such as CATIA, NX, Inventor, AutoCAD, StressCheck, ANSYS, SolidWorks, SolidEdge, PAM-STAMP, etc. PTC is planning on providing a new CSYS at the part level for Creo 4, which consist of three little brown arrows with XYZ identifiers. PTC needs to catch up with the competition and provide this, as this should be an easy addition to code in the software. Creo Simulate already has it, but not Creo Parametric. Most CAD systems have the red/green/blue CSYS with arrowheads, as some examples are shown below.StressCheckANSYSNXInventorAutoCADCATIACreo Simulate Results WindowCreo SimulateSolid EdgeSolidWorksPAM-STAMP
Dean,Are you sitting there broken hearted because of Creo 3 or Creo 4?
Creo 4 with ISDX has G3 acceleration.
If the material properties definition has the correct density, and if a 1g load is applied and the reactions are checked before processing, then yes, the weight of the component may be viewed in the run summary.
What Date Code is your Creo 2? I don't remember that when Creo 2 F000 was released. So I deleted a couple of my posts.
Unite Technology in this link: Re: Creo 3.0 Unite Technology Import Capability - PTC Community
Results can be viewed as shown below.
Brian,I have attached a document from Intel that gives a good comparison between Xeon and i7.
Thanks for the input. I just got off the phone with one of our IT folks, and I was surprised how much he already knew about the subject. To make a long story short, McAfee was updated, and it's blocking the installation to the temp folder. The IT rep will email me some instructions tomorrow to work around this. They are having the same problem with people trying to install AutoCAD, pending prerequisites. He actually told me that I was having a "pending prerequisite" problem right after I told him about the error code. So the IT folks already are on this subject and writing fixes for different software. I will let you know how it goes.
Tom,There are a lot of log files for platform services, as shown below. I attached a couple of screen shots and uploaded the most recent log file. Some of the errors reported in the log file are:Failed to load UX DLLFailed to load UXFailed while runningFailed to run per-user mode
William,Here's what PTC has certified for MSI.
You're welcome.
Nice presentation.
Hi Jessica,You can make a datum plane 45° from the top plane. But in order to do this, you need make a datum axis through the right and top planes. With the axis highlighted, create another datum plane with the top plane as the reference to made the 45°, or 135°. Once you have that made, you can sketch on that plane and use extrude up to surface to make the arch. Then you can use the hole tool to create the hole. I provided three images below to assist you. Welcome to the forum.
Jessica,I have added two more views to assist you. You make the sketch on the datum plane as shown below. Then extrude up to the surface.
Finished product using display style.
There are several ways you can do this, and all of them would be correct. You can make the sketch as shown below, but I used the datum plane and datum axis as references. You don't have to sketch the way I did, but I drew a circle first, then boxed in the lower part and trimmed part of the circle. You can also draw a rectangle, then draw an arch for the top portion, then trim part of the rectangle. Once you have this, just extrude up-to-surface.
It is a best practice to make features from datums rather than from other features.
Community,I'm studying on how to add a new fastener type in the Help Center (image attached), and I want to add a NAS-624-28 (12-pt head) which I downloaded. The Help Center starts off with "open the fastener instance catalog file", so I'm already at a loss. We installed AFX today so we could use our own fasteners. Is there a tutorial/video on how to do this (add a new fastener type)? Thanks in advance.
Oliver,When is the next release?
Oliver,Now to add more instances, for example, NAS624-30, I just add the necessary data to the nas624.dat file? Correct?
Oliver,Is L-Grip the grip length L-T or just T from the NAS standard? You have it listed as T, which is 0.485. L-T would be 2.235 - 0.485 = 1.75. I just wanted to make sure I understand the variables in the .dat file.
I'll check that tomorrow.
I only tried as admin. I have not tried it from cmd.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.