Recently active
Right. After you select the Offset Coordinate System Tool, you select a csys and the select Import to bring in the points, as shown below.You can make a .pts file in Notepad with a .txt extension. You have to make three columns for X Y and Z. After you enter all of the data in Notepad, change the file extension to .pts, then you can import it.
Hi Daniel,If you're trying to import the bunnyData.pts file, I don't think this will work because there are too many points in the file. There are more than 30117 points in the file, exceeding the amount you can import. Look at the below image for clarification.
This may not be what you're looking for, but I just closed with a revolving surface.
You're saying that the opening is a true diameter, not an ellipse?
Robbie,Just change the accuracy to absolute as shown below. I was able to edit the base to 1266. That should fix it. You may have to add enable_absolute_accuracy to config options.
When you reply, select "Use advanced editor", and you can attach files.
YouTube has a lot of free videos. I think you will find that this is the area where PTC is behind in the competition when it comes to training. After taking two PTC courses, I was allowed access to the eLearning libraries for one year, but you don't get any material to keep as a reference. We also use ANSYS, and I was able to download every workshop and lecture manual in pdf color format from the ANSYS portal, to keep. Now how's that for customer support. I tried to get PTC to do something similar years ago, but they wouldn't budge. Try the free trial for eLarning and see if you like them.
Hi Robbie, You stated that the first image is fine, but when you create the second model with a base length of 1266 instead of 748, the "flange" doesn't work? Does this mean it's supposed to be 85° instead of 90°? Do you have two flanges in the model? Which flange are you talking about? I couldn’t replicate the problem as shown below. What units are assigned the model? Can you upload your model?
Hi Michal,Do you have to have all those edges in transition? If not, here is another way of making something similar. You can make this duct in sheetmetal using a parallel blend, then flatten it. It's not exactly the same, but it's just an idea. See the images below.
You could submit this as a Product Idea for the developers.
Creo Simulate can only output the .ans (Ansys) and .nas (Nastran) file formats.
Here's an indepth demo of Creo 2.0, about 58 minutes. It's worth watching if you're new to Creo.http://www.ptc.com/product/creo/upgrade-resource-center/video/ptc-creo-2-0-demonstration.htm
Joseph,Here's a discussion and resolution when I had a problem trying to wrap a curve. The problem I had is that I didn't put a csys in the sketch, but Antonius helped me out on this one.http://communities.ptc.com/thread/44519
Did you create the csys in sketcher mode?
Excellent. Thanks Matt.
Hi Dan,Are you asking how do you get formats .cbd/.rst or .dat/.f12 from Creo Simulate and not .ans or .nas?
These Save icons as shown below:
Dalton,As long as your equations form a closed loop, you can extrude by selecting Project under the Sketch tab, as shown below:Welcome to the forum.
Regularly saving your own file is the surest way to preseve the work that you have done. Just get into a habit of pushing the save icon often. I save everytime I make a feature in a model. And deleting old versions will keep your directory clean.
Did you make this, or is this just an image you found?
Someone correct me if I'm wrong, but PTC does not certify or support GeForce graphic cards.
Try looking at the Dell Precision Laptops M4800 or M6800 www.youtube.com/watch?v=Jl65c-J0MgA
Just make the holes after the pattern.
If it's like the example you provided, make the 25-mm x 300-mm u-shaped extrusion with the 6-mm thick base. Make one fin and pattern it. Done. Welcome to the forum.
Never had that problem with M090.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.