Recently active
You can create a COG CSYS as shown below, and then add the COG symbol in drawing mode. This post is just to give you some ideas, however, someone may have a better idea. So this is a starting point. Hope this helps. welcome to the forum.
Bertil,To start, make sure you have the images (with dimensions) in the working directory, then follow the steps (images) below:Go to the View Tab>Model Display>ImagesSelect ImportSelect a Datum PlaneSelect the desired images from the working directory.After the image has been attached to a datum plane, it will need to be fitted to scale. Examine all the tools under the Images tab.
3DXML is a proprietary 3D file format developed by Dassault Systemes under its 3DVIA Brand. It uses an XML container whose specifications were published. It should not be confused with X3D, the ISO standard XML-based file format for representing 3D computer graphics. Up to this date the 3DXML format is only supported by Dassault Systemes product line. The 3D XML Player is a standalone application that allows you to view 3D XML files on Windows. The 3DVIA Player, a free player available on both the Mac OS X and Windows platform, allows to view 3D XML files in a web browser, offline or online.
A commercial version cannot open a student version, refering to .prt files. You might be able to save it as a STEP (neutral file) and import it in a commercial version (but I haven't tried it).
Michael,You're creating a part that needs to be mirrored after shelling, if I understood your post. Try this first:Make a simple extrusion and shell itSave it as a mirror partTo help facilitate visualization, look at the below images: The new part has been mirrored about the FRONT plane and along the Z axis.Welcome to the forum.
What was it modeled for?
Dave,Did my post provide the answer?
Perhaps I should have said, "double-click" on the image.
Neal,I couldn't replicate the problem in Creo 2.0, as the datum tags printed in pdf (shown below).
That's certainly what I was looking for. I don't know why they removed it from Creo 3.0 Help Center. Thanks.
The below image shows where to obtain all the config options for Creo 2.0 in pdf format. Does anybody know where it is for Creo 3.0 (same format, pdf)? I was not able to find it in the new Creo 3.0 Help Center.
Go to File>Properties>Units and select Info, as shown in the below example. This will give you all the units of measure (click to enlarge).
Just follow the Creo 2.0 instructions below (click to enlarge):
If you check "Account for Stiffness", and enter the desired preload, the computed preload values will be in the Run Summary file.
Anoop,The model has no properties, and it's just a collection of closed quilts. I trimmed the model so you can see inside (below image). It's hollow inside, not a solid, and it doesn't even have a thickness.
If the Creo Simulate 2.0 is a commercial version, and the Creo Simulate 2.0 Lite is a student version, then the files will not be compatiable.
Based upon my own research and PTC's comments, I would have to say that the software does not support the type of analysis you're seeking.
Perhaps the Motion is under the below Applications tab (Creo Parametric 3.0):
Yes....that one I have seen before. Thanks.
Can you share the model?
Enlarge (double-click) and read PTC's comments on impact with two moving bodies.
Since you're using SPA, there are only two passes. What edge order shows on the final pass? For example, let's say it's 6. Then you could just run a MPA p6 to p6, and this will make one pass and you should get the same or nearly the same solution.
Lucky,Are you refering to The Law of Conservation of Momentum? You would apply this law for two colliding bodies, or two moving bodies.
Nice presentation, but I didn't see anything in here that pertains to a drop-test analysis.
If you have multiple surfaces that are connected and form a closed volume, you have to merge the surfaces then solidify into a solid body.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.