Recently active
I submitted a Product Idea to allow changing the text height without having to restart Creo.
This certainly works, but you have to restart Creo for it to take affect. I will notify CS (case #12323564) that Creo 3.0 does have the capability, as shown below. Thanks for sharing.Figure 1: Height 70Figure 2: Height 50
Good info and I will have to try it in Creo 3, because CS stated it couldn't be done.
It is not possible to configure the font size when editing parts. It is fixed relative to the screen resolution.
Can you upload the model?
There are a lot of free training videos from PTC in the attached link:http://learningexchange.ptc.com/
Lamit is great. I still have mine from Pro|Engineer 2000i, even though I'm on Creo Parametric 3.0.The problem I've had with Toogood is that there is no index, but I like his work.
Wouldn't Copy>Paste be just about the same?
Are you looking to perform a contact analysis with friction (Creo Simulate) or are you trying to simulate contact with Creo Mechanisms?
What version are you using?
In Wildfire, you need ISDX to insert an image. With Creo, you don't need ISDX, and this was an improvement for those who didn't have ISDX.
Yes it is. Sikorsky and Boeing practice this for their airframes, and it sure makes my job much easier.
If Style is grayed out, then you probably don't have the license for ISDX.
Interesting. I will have to try this, because it's new to me. We've always had ISDX, and I've never attempted inserting an image in drawing mode.
To change the units, see my response in the below thread. You will need to go to the Units Manager to change it.http://communities.ptc.com/message/266568#266568
Can you post an image of the warning with the sketch?
All the major components should be modeled on the same csys, so when it comes to assembly, you just connect them based upon the csys (but that's my opinion and the way I practice). I learned this from Sikorsky Aircraft.
riverside34,If you think Solidworks is the standard, please read the attached post:http://communities.ptc.com/thread/56172
Asd,I receive a lot of CATIA V4 files (.model extension), and the company that provides them will not send them in neutral formats, such as .stp, or .igs. Unite Technology allows me to import their files with ease, and I can quickly turn these files over to manufacturing. So this technology is well worth having for specific needs.
So far, I haven't had any problems with it.
What version of Wildfire? I have WF4 and WF5, and I had to place many images in these versions, but it's a little bit different process. I can show you how to do this, because all the WF versions are basically the same for this process.
I know this is in Creo Parametric 2.0 and 3.0. I uninstalled Creo 1.0, because of instabilities. I don't see this in WF5 or WF4. My screenshot is from Creo 3.0.
I think this web site will enlightened your understanding, as it explains what the file is used for.http://www.file-extensions.org/3dxml-file-extensionThese files can be saved as .stp or .igs, and then you could import them into Creo, but I think they're just 3D images, no modeling history.
Manish, For now, I'm going to assume you have an assembly in Pro|Engineer or Creo Parametric where the components have different units of measure. I would recommend changing the entire assembly to the same units, and this will include all subcomponents, as shown below. You can check "Include Submodels", and this will change all the submodels in the model tree.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.