Recently active
I noticed several post in the community that I made several years ago, and they are showing up only 7 days ago.
You can place points on a rectangular surface by ratio or by length.
Mark,I was able to resolve this on my own, but I'll give you credit for helping out. I worked on this for an hour yesterday, and I always got the same error. So I went home and started over again after deleting all the offset lines. I made all the fasteners and nuts on the same axis, and made offset lines that are inline with the fasteners, but this sort of defeats the purpose of "offset".
When I make offset lines going from the bolt to the hole in the skin, it works fine. But when I try to make the final offset line from the nut to the hole in the skin, the line always winds up in the middle of the other line as noted below. Does anyone know how to fix this? Thanks in advance.
There must be something wrong with dating of posts. I know I posted that a couple of years ago.
Thanks Erik. That was a really old post that I had resolved and forgot to update it.
I submitted a Product Idea for this, and you may vote on it in the below link:https://www.ptcusercommunity.com/ideas/6205
I'm using Creo Simulate 3.0 M050, and the below image is how the results window looks for displacement. The title is no longer at the bottom of the window, as with older releases such as WF5.
David,I filed a PTC support case for this problem (Case # C12667146), and technical support replied that the fonts in the results window for stress resize with the height of the window. There is not a config option to change the size of these types of fonts. The only fonts that can be changed in results windows are for the graphs. With that said, I'm going to submit a product idea.
Hi Jonathan,Can you upload an image of what you're trying to create? Welcome to the forum.
Creo Simulate release:http://www.amazon.com/Creo-Simulate-Tutorial-Releases-1-0/dp/1585037583/ref=la_B00J1WQQC4_1_2/175-7986978-0398902?s=books&ie=UTF8&qid=1440543404&sr=1-2
That's a very good question. I know you can change it for graphs, but I never really thought about the other. I will look into this.
Exactly.
Good...then you should be able to make the surfaces and work with them.
Lawrence,Yes. It's very fast and easy. Just select the curves and sometimes you will have to hold the shift key, since your model was an import of composite curves, but that's about it. Very simple.
Add the capability to select which Community you want the Product Idea to be placed. Currently, the seven Communities under Creo are grayed out (shown below), and the end user is not allowed to select the right Community to collect the most votes. The Product Idea appears in the Creo Group Overview. Allow the Product Idea to appear in the Creo Group Overview and the Sub-Community.
Hi Lawrence,The Style tool is part of the Interactive Surface Design Extension (ISDX) module, and yes, it has to be added to your license. When you have it, the ribbon looks like the below image.
There is no need to fill in the notch then recut.
It sounds like the curves are not continous.
Hi Brett,Can you upload an image of the composite curve after you select it with your LMB? Or can you upload the model?
Lawrence,I've attached the model, except this time I used the Style tool and filled in the curves with one surface, since it's 3D. See image below.
You might want to try and post this under the System Administration forum. I know that Wildfire 2 is not supported on Windows 7.
Jonathan,You stated that your school switched to Creo. Are you using a Student Version? Creo Surfacing and Freeform Surfacing, Interactive Surface Design (ISDX), can make this very easily. Do you have ISDX with your school edition?
Here is a post that has the IDD manual attached. https://community.ptc.com/t5/archive2/IDD-for-Creo/td-p/108334
Lawrence,You can create a surface in using the Fill function in the attached model. Create a datum plane through the imported curve and sketch a Fill surface. See below image.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.