Windchill
Recently active
If any of you have running systems with NX (we're on 2007) in Windchill (WC12.0.2.8 and WGM 12.1.1.0), have you run into this error on the CAD worker? What it seems to result in is disconnecting NX from the WGM and then subsequent jobs fail with the same signature when in fact there is no error. The first failure that occurs is genuine (something off with the drawing). Right after that, there's an entry in the NX .syslog file saying something like "unloading .ugadaptor dll for WGM". And then the worker for NX is down until the application if removed from Application Management and re-added. Are there some wgmclient.ini options for ignoring regen or attribute errors like there are for Creo? Is there a graceful exist to this error that doesn't take the whole worker instance down for all the subsequent jobs?
Hey everyone, We are in the final stages of our SSO configuration for Windchill. We get prompted with the Microsoft sign-in, but it ends up searching for the user's email attribute in Windchill rather than their first.last (our current setup for user accounts in Windchill).We have tried mapping the attributes to no avail. We are also required to delete everything in the address bar after */Windchill in order to get it to load. I end up with a "URL not found" error.
I need to restrict the attributes on my edit page to different users. For example, while I cannot see some attributes for user X, I want user Y to see all of them. How can I make this distinction?
I converted my users from WindchillDS to MS AD over the weekend. There were three users that seem to have issues reported in Windu. Their current domain does not match their Default domain. When I try to do the fix per the instuctions, it does not keep. There are no log errors. I am on Windchill 11.1 m020 cps 28. User <username> is not in default domain Current domain: [/]/User/Unaffiliated Default domain: [/wt.inf.container.OrgContainer=<org>]/<org>Because user belongs to organization: <org> ************** FIX INSTRUCTIONS ****************************************************************************************First check if all the Organizations are in the correct domain. If not, update them and re-run the WinDUGo to Site -> Utilities -> Participant Administration Search and add the User listed with incorrect domain using the Participant Picker (Add Participant)Edit the User and update the domain of the User to
Hello, As Administrator, i was asked some KPI about the usage of Windchill Licenses and there are two of them i have difficulties to get for each type of license and during the 3 or 6 past months: 1) The percentage of licenses which are entitled but not used at all.2) The percentage of licenses which are entitled but not used a lot. I miss the entitlement date in order to have a reliable percentage. The different License reports, even the Windchill Performance Advisor don't provide this date. The objective is to optimize the licenses we allocate What do you think about ? Best regards,Pascal
While upgrading to Windchill 12.1 today, we required a reboot of the server. Windchill was running fine prior to the upgrade, but we could not access Windchill after. Windchill returned the following error "HTTP STATUS 404 Not Found": The requested URL was not found on this server. A search revealed PTC article CS374085 which stated the cause of the error to be missing files 30-app-Windchill.conf and 20-mod_jk.conf in <HTTP_Server>/conf/conf.d Restoring those two files fixed the issue; I am just wondering what caused the files to go missing in the first place. Anyone have any experiance with this?
We are currently on Windchill PDMLInk Release: 11.2.1.17. We were supposed to upgrade first quarter 2023 but it was moved to 2024 by management. In earlier versions of Windchill a user could do a search for a objectname* & get all revisions, prt/asm/drw. From there it was a clunky but doable process to restore a previous revision when needed (a extremely rare situation). However, today I attempted to show it was done & as a user my search only showed the current revision(s). Logging in as organization admin (in a seperate browser) I was able to successfully see ALL of the revisions of that same object name. It's been a long time since I attempted this, certainly a few versions ago. Is there a permission lever that our users would need to be able to search for & access previous revisions? Thanks,Joe S.
When converting Excel file into XML file, Instead of constraints related information there is some 14 digit number in constraints value for example - CONSTRAINT= 93716108618800 is in XML file. What is this value refers to?
HelloI want to use it to report date data on our activities. Percent Change, Updated value, Last Value exc. Thanks
When converting excel file into XML file, under layout definition there are row and column coordinates information in converted XML file which is not in excel. what is row and column coordinates in XML file?
Hi,As per the prerequisites of Thingworx Navigate, Thingworx Flow need to be installed. So, Can Thingworx Flow be installed on a Linux Server? I went through the docs and found no installer for the Linux OS.Thanks,
Hi all, it's possible create two differents SBOm starting by one EBOM? The idea is to use for one of them the options "New Downstream Part" and fort he other one "New Downstream View".Thanks
Hi All,I want to list out all Soft types of WTDocumnet by using Windchill API's.I have created few soft types from type and attribute manager, now my requirement is to show all the soft types of WTDocumnet in a list by using API.My soft types from type and attribute manager as shown here,Kindly let me know the related API for this.Thanks,Vivek
I am in the process of testing revaulting in Windchill 11.1 m020 cps28. I started on cps08 and there was no Cancel button. So I upgraded my different Windchill servers to cps28. The first one I tested the revaulting with, the Cancel button showed up. With the second one, the Cancel button is still missing. I have tried clearing my browser cache and different browsers but no fortune. Anybody have any ideas? I opened a tech support case but it is out of date. Thanks, Brian
ACL has been created with modify identity access for WTParts in all lifecycle states. But user is not able to rename at Eng hold state/reviewed/underreview states.
I am using Windchill PDMLink Release 11.1 and Datecode with CPS M010Frequently server getting down.Getting error(Tomcat is down or refused connection)Here are the errors that I facedTomcat is down or refused connection.No response has been sent to the client
Hi all,I have te requirement to get the status (no/sucess/failure) of a specific distribution target by calling a odata service. There can be more then one. Does anyone know, how to get the highlighted values above by using odata? Thanks,Jürgen
Hello, can anyone help me on how to loop inside this infotable where i can display the output as json for each AttributeName having multiple AttributeValueText as separate objects with same AttributeName. For example an object having AttributeName1-AttributrValueText1 and AttributeName1-AttributeValueText2 Thanks.
Hello I am trying to get the total number of members of a WTGroup in Windchill via code, so the sum of all users in a group and all its subgroups. Actually I need to check if the group size is bigger than a specified limit. I tried to use .members() but it always fails with a PrincipalRepairFailedException error (Cannot process user because a related disconnected participant exists in the database). I have tried using OrganizationServicesHelper.members() or group.members() but it all leads to the same error. Does anyone know how to solve this issue. I do not need to know the user names and attributes, I just need to find the total amount or if the member amount of a group is greater than a specified limit. Best regards
I would like to replicate the OOTB Save As feature. The purpose is to get the custom attributes value from Users for populating new name/number/filename through custom wizard.Using EnterpriseHelper.service.saveCopy(oldepm,newepm) helps me achieve half of the requirement. The problem here is while opening the newly created 2D Drawing in Authoring Application, it throws pop-up message like this new 2D still referring the old 3D Model. In OOTB save as, it does that from Windchill itself.
Hello, working in PTC Creo with Windchil the most often error while checking in is parts/assemblies that hasn't had modelcheck status True while checking in. How to perform modelcheck on this parts? Yes, I can do it manually by finding and opening each part one by one, but how to collet all this items and perform modelcheck on all of them at once? There is one big assembly that I want to check in. When i perform modelchek on whole assembly I do it this way for interactive modelcheck:It collects all the model which is active in this particular assembly. But sometimes there are suppressed models/assemblies that modelcheck doesn't collect and at the end result it can't check anythin in. Thank you in advance.
Hi all, During our test of SFTPExtension extension, we noted that it is possible to call the extension from a javascript service regardless the time we spend in the extension. We never got a script timeout. Can someone explain why and how it works ? Thanks for your help. Cyril.
I am using Windchill PDMLink Release 12.1 and Datecode with CPS 12.1.0.0When trying to create a Vendor Part, i get the error message " organization ... is not a Vendor organization". I am unable to select an organization when creating a part. I created Vendor organizations.Here are the errors that I facedorganization ... is not a Vendor organization
I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.2.9Are there any restrictions for Architecture Editor?? Why after filtering visualization of structure is wrong?https://3dprocompl-my.sharepoint.com/:v:/g/personal/kurbaniak_3dpro_com_pl/EQyMnRWmeiJOrBkse-mvg_8BohoYiv7fuX83VsF2zbsKaA?e=P1rNBf
Today we celebrate International Women's Day! I thought there could be no better way to celebrate than to go find some smart women around PTC. We have so many but I targeted our ThingWorx Navigate product organization as the latest ThingWorx Navigate release is just around the corner! It was a pleasure to sit down with Emily Hartman, Director of Product Management for our ThingWorx Navigate Product. Please listen in our our discussion together. Jaime Lee: Thank you for taking time to meet with me today! It is so nice for the PTC Community members to get to know the faces behind our customer's favorite PTC products. Please tell me a little about yourself. How long have you worked for PTC? Emily: I have been with PTC almost four years. Jaime Lee: Yes, I actually remember our first conversation together. I believe we were setting up a ThingWorx Navigate working group t
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.