Windchill
Recently active
Product Structure Export to ExcelI might have added to a thread about this, but when not sure, try again.Even this one has ptc support & R&D stumped, although you would think it be easy & OOTB.From a wtpart detail/info page, you can select actions/export & when app opens, you can enter a xls file to export to.But the excel/xls has OOTB attributes columns. You would think there would be a policy, rule, config properties, rbInfo or something file that specifies what the OOTB attribute columns are to be.You would think you could then edit that file to allow you to generate an excel/xls with your own chosen attribute columns. Somewhere the system knows what attributes to report on.But not only doesn't ptc support or R&B know how to do such a thing, they don't know even know which file controls what attributes are reported for OOTB.From the Structure Tab & Multi-Level BOM report, you can change/customize the View & chose which attribute columns will show. But you
Hello, Has anyone tried to figure out the way to be able to only download secondary content from WTDocument and prohibit download of primary content at the same time? Assuming we have this table "Primary Content" and "Attachments" - I would like to be setup ACLs in a way to be able to download Attachments, but not Primary Content. Obviously I setup already the ACLs in a way that "download" is prohibited for this type of WTDocument. But the goal is to be able to do it without changing Java code of related data utility. Any ideas? Best regards,Mateusz Walendziuk
Our notes were originally created as CAD parts, type: other.These notes show up in my \Creo-Standards\Notes folder.However, I am not able to edit the notes.I created new updated notes however they import as text files and are not visible or selectable to add to my drawings. How do I either:1) edit my existing CAD part note file?2) Create a new CAD part with Type: other as a note file in my default directory?3) Convert my .txt files to a file that is selectable for a drawing note? I'm using CREO 7 and Windchill 11.1
I want to rename the status value 'Potential' to 'Pending'In Type & Attribute Management, the status of a WorkItem looks like a modeled attribute, and immutable. Is there a way to change these values?
Has anyone been able to successfully include a custom JDNI adpater in rehost? There's a comment in the rehost.properties file:############################## Adapter Changes############################# "administrative" is the default suffix for the AdministrativeLdap adapter# "enterprise" is the default suffix for the EnterpriseLdap adapter# Additional domains for other adapters can be added by specifying the adapter# name as a suffix. Connection information for those adapters is specified by# adding a set of LDAP connection properties with the same suffix.Then it uses the default "administrative" and "enterprise" in the properties:target.ldap.renameAdapter.enterprise=com.<company>.EnterpriseLdaptarget.ldap.renameAdapter.administrative=com.<company>.LdapSo that leaves me to believe that that if I had a suffix for the JDNI adapter I could specify:target.ldap.renameAdapte
I need to edit the conflict message for business rule ,where to find the "View business rule conflict" report
Hi All,I am wondering if anyone who is using Plant Data and the view hierarchy which includes Design, Manufacturing, and <Plant> views understands how the new plant based filtering capabilities work? In the structure filter, users are now able to use the Assigned Plant configuration specification and the Plant Filter. I have poured over the WHC topic but I'm still not confident in how each one works and the use cases that are solved. Does anyone have some insight? Thanks,Patrick Williams
Users should be able to create a ECN only if ECR is completed, i.e., when ECR is 'Open' state, I don't want users to be able to create an ECN. Is that possibility?
HiI am trying to configure a 10.2 identical node type cluster with two nodes obviously one of which will be the active master.As per the Advanced Config Guide (http://support.ptc.com/WCMS/files/156979/en/WCAdvDeployGuide.pdf), the 2 properties that need to be set are:wt.rmi.server.hostname=Awt.cache.master.slaveHosts=B, C, DBoth these properties are set. But when I start Windchill, the MethodServer will start only on that node which is started first. For Ex. if I start Windchill on Node # 1 first, the Server Manager and the MethodServer both come up on it. But on node # 2 which is started after node # 1, only the Server Manager starts and never goes beyond the following line:INFO : wt.manager.CacheMasterNegotiator - Master stub retrieved: ServerManagerImpl$MasterServerManagerImpl_Stub[UnicastRef [liveRef: [endpoint:[xxxxxxx.xxxx.xxx:5002](remote),objID:[-2dd23186:148e7679245:-7ffd, -7282938796370177322]]]]No MethodServer on node # 2. If I go back to node # 1 and kill the Server Manager
I am using Windchill PDMLink Release 11.2 and Datecode with CPS 11.2.1.17For collecting AML/AVL of specific sourcing status in a package, I want to update the Sourcing Status List while creating a work package in set collection rules.
Hi all, I am building a custom rest service which takes 2 string parameters and returns some output. However, one of the string parameters is an encrypted string which contains special characters and has unknown length. I keep getting an error : (Key ' ' is invalid), parsing error. Now I'm wondering if there is a limitation with the approach I'm taking. If so, is there another way to accept encrypted strings?
I am using Windchill PDMLink Release 12.0 and Datecode with CPS 12.0.0.2Getting Error while creating WTPart or WTDoc using defaut template "Caused by: wt.vc.VersionControlException: (wt.part.partResource/19) wt.fc.InvalidAttributeException: The name attribute must have a value. "Here are the errors that I facedCaused by: wt.vc.VersionControlException: (wt.part.partResource/19) wt.fc.InvalidAttributeException: The name attribute must have a value
I cannot see why not but let me know if anyone has used the WVS Scheduler Administrator for other administrative tasks other than publishing and WVS. I have a sync task were I need to connect to an outside database and compare data to objects in Windchill. Seems to be the perfect vehicle to create the jobs, schedule it and monitor its execution. Assuming other scheduler tasks are defined in a similar manner, is there a more recommended method of hooking them in or kicking them off?
Hello PTC Community, I hope you're all doing well. I am currently working on an assignment related to Windchill, specifically focusing on studying and documenting ACL (Access Control List) configurations for WT Parts and CAD Documents. However, I'm having difficulty locating and accessing the ACL configuration settings within Windchill. I would greatly appreciate any guidance or insights from experienced Windchill users in this community. Here are the specific details I'm looking for:1. How do I access the ACL configuration settings for WT Parts and CAD Documents in Windchill?2. Are there any technical steps I should follow to access these settings?3. Once I'm in the ACL configuration, what information should I document about each ACL, including ACEs (Access Control Entries)?If anyone can provide step-by-step instructions or screenshots of the process, it would be incredibly helpful. Your expertise and guidance will contribute significantly to the successful completion of my
Hello,I would like to add a new restriction to the attribute "NAME" of my CAD Document in term of string length.I was wondering if it will be applied to the existing data.Will the existing CAD document with a name longer than the limit will be truncated?Thanks for your help, Windchill 12.0.2.1
Hello, I have a simple issue. Assume I have a geometry in my part that uses a parameter from windchill, coming from WTPart to the CAD object. The Idea is to input this attribute during the actions configure (ie. Option filter is done as well as the parameter input in the second step using parameter at top level and child resolution given to the required child). The issue is that, the child receiving this parameter, since it needs the parameter in order to propagate from WTPart to the CAD object, that respective child needs to be configurable. However, if that node is configurable, then we cannot define Locators. Is there a way to maintain the Parameter appearing because of configurable module yes and have the locators for that node appear as well. Cheers.
When number of files pending for sync increases we usually do SiteForceSync using jconsole. What is alternative for jconsole to do siteForceSync? We want to explore any other method to achieve what siteForceSync does to system.
Hello ,My user have role " role001" in 3 differents ProductContext .How can i get programmatically this 3 productContext when i login with my user .Thank You
Hi PTC Community,I'm 6 months old to Windchill and wanted to work on Windchill Info*Engine Adapters. I have PTC Windchill doc for how to configure my WC info*engine adapter. But I don't have proper doc for JMS Core properties. I wanted to connect my WC Adapter to 3rd party application to retrieve the desired data (Example: Part Number, Status, Doc linked to part number etc.) from WC Database. I would be glad if anyone can guide me on how to configure WC adapter and connect to 3rd party. Thanks in Advance.
Consider two scenarios,1. A wtpart with number 0001, A.1 is used in 7 different product structures.By revising that wtpart to B.1 , will the new revision B.1 get updated in 7 different product structures as well?How to achieve this? 2. A 2D drawing with A.1 revision is referenced(associated) by 15 wtparts. by revising drawing to B.1, will this latest revision updated on its associated wtparts also?How to achieve this. Thanks in advance.
My aim is to create a view, which does not display CAD Part Generic in the table.At the top of the table, the attribute name appears to be "Object Type Indicator".However, when I try to define a filter in Edit View, I can't find such an attribute as "Object Type Indicator" in the 'Criteria' list.In Windchill this kind off Filter in the Edit View is available or not?
We have a custom scheduler running with Job - ABBWorkflowProcessJobMonitor. The scheduler is running every two minutes, but every time the job log shows - "Query returned null". Is there any way we can understand what kind of jobs are to be triggered by this particular scheduler..
I am using Windchill PDMLink Release 11.2 and Datecode with CPS 11.2.1.17After update of release to 11.2.1.17 wcadmin (Administrator) is no longer active. All other users are working right but wcadmin no. I can't publish cad document in this way
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.