Windchill
Recently active
Hi, Asking for references how have you operated in the following situation. Version I use is 12.0.2 In BOM-transformer, MPMlink: If parts is created by mistake to manufacturing view that should be in design. (Accidentally click duplicate with propagating, when I should just allocate the design as design to manufacturing side) What is the back up plan? Is it possible to just remove the manufacturing views of those parts if you detect it immediately? Will the connection link between design - manufacturing view even allow it (admin rights). This is important because if manufacturing view have been created, it will always use it instead of design, and this is not what I want by accidentally created components. Thanks in Advance.
we write this xml in info engine.<%@page language="java"%><%@taglib uri="http://www.ptc.com/infoengine/taglib/core" prefix="ie"%><ie:webject name="Query-Objects" type="OBJ"><ie:param name="INSTANCE" data="$(@FORM[]supporting-adapter[*])" delim="!" valueSeparator="!" default="<%=com.infoengine.au.NamingService.getVMName()%>"/><ie:param name="ATTRIBUTE" data="Customer1"/><ie:param name="ATTRIBUTE" data="Emmision"/><ie:param name="ATTRIBUTE" data="Engine"/><ie:param name="ATTRIBUTE" data="healthStatus"/><ie:param name="TYPE" data="wt.projmgmt.admin.Project2"/><ie:param name="WHERE" data="()"/></ie:webject> we write jsp as <%@page language="java"%><%@taglib uri="http://www.ptc.com/infoengine/taglib/core" prefix="ie"%><html><body><ie:task uri="ext/NEWEXAMPLE.xml" processor="com.windchill.wcdev.Windchill"/><ie:webject name="Display-Table" type="DSP"><ie:param n
Hello, in all the years of Windchill projects there is one problem-area that's always coming up:The (Creo) workspace and it's (annoying) limitations. Quite often there is a triple set of related objects: CAD Model, CAD drawing and a related item. (yes, that's somewhat simplified 😉 )Model, drawing and item have usually a different number - which results in the "problem" that in a table view it's hard to group those triple sets or pairs in the table view.A solution we sometimes use is to define an IBA on the EPM documents named "partno" as well as on the WTParts. that attribute always contains the value of WTPart.number.result: in the workspace it's possible to sort by column "partno" and the objects are grouped together. my customers like that. But... while this is "ok" for smaller installations it's creating a lot of "duplicate" data in the database and especially in the StringValue table which is quite often already huge even without that attribute. Problems
Hi, I'm trying to think solution to retrieve all design views that have manufacturing view, which have equivalent part but the link is out out of date. (Example: Manufacturing view A.1 is done from Design (A.1). Those part have valid equivalent link. Design view gets revised and is now B.1 --> equivalent link exists between part numbers but is not pointing to the latest. I think this article can be utilized: https://www.ptc.com/en/support/article/CS72503 This query retrieves latest version of views when searching by part number.First step where I need help. I would like to add check if per part number exists both design view and manufacturing view, then and then only it would return them. By this I could find all latest manufacturing views that have been made from design view. After that I was wondering the following; I could add to the tables and joins either manufacturing equivalence link or wt.vc.Iterated to get the actual RoleA - RoleB i
I'm playing around with auto-numbering in my dev environment.For most things in production we'll do a File/New in CAD and then auto-associate/create new WTPart on checkin. That works just fine. For some cases, we'll create the WTPart first (or have a manufacturing view). In auto-numbering with the part-centric approach, if I create a new WTPart and check the "Create CAD" box both end up having the same Number value based on my sequence and naming. So that works fine. Keeping the same rules in place, File/New (in NX) creates the correct next in sequence number to replace the file name on save (from Help Center). On upload or check-in though, the auto-associate to create a new WTPart generates the new in sequence value for the Number. The name is fine (same as CAD). This appears to be OOTB expected behavior (Help Center ) Is there a way to turn off auto-numbering for WTParts when the CAD is creating it via auto-associate (CAD centric approach) an
hello. I want to modify EPMDocument OIR. However, an error occurs when creating or editing something.INFO: wt.system.err wcadmin - MPInputStream object body top boundary mismatchINFO: wt.system.err wcadmin - expecting ------WebKitFormBoundaryE1m4lu5jFp1z5kHWINFO: wt.system.err wcadmin - foundERROR: com.ptc.jca.mvc.controllers.ActionController wcadmin - java.lang.reflect.InvocationTargetException java.lang.reflect.InvocationTargetExceptionat java.base/jdk.internal.reflect.NativeMethodAccessorImpl.invoke0(Native Method)---- Omitted below ----Is there a solution??
Hi Guys, We can upload a Solidworks part & assembly into Windchill with the associate at WT Part. Right.However, there is a Weldment tool in Solidworks that allows us to divide multiple bodies from a single component and saved them as assemblies, which we can then upload to Windchill with automatic association without any issue. Regards,Aj
I am using Windchill PDMLink Release 11.1 and Datecode with CPS M020-CPS20Creating a part, drawing or assembly, it is coming automatic ten number,Are you change this issues,Like,Right now - 0000011512 ( 10 number)Change it - 001011512 ( 9 number)001, 002 and 003 for projectHere are the errors that I facedCreating a part, drawing or assembly, it is coming automatic ten number,Are you change this issues,Like,Right now - 0000011512 ( 10 number)Change it - 001011512 ( 9 number)001, 002 and 003 for project
Hi experts, We are developing an add-on using some REST APIs(such as NewDownstreamBranch) to automate some UI operations of the BOM Transformer with workflow robot processing. Currently, when calling the REST API, we need to authenticate the workflow initiator, but we face the challenge of not having a way to obtain the user's password information. Is there a good way to obtain the password and pass it to the REST API? Would there be a way to obtain the password if it's an unsupported API? Alternatively, is there another authentication method that does not involve directly passing the password to REST API? If there is no viable method, we are considering requiring users to enter their password for this process.
Dear all, We are trying to install the WGM on 60 laptops using Microsoft Intune. But after install the users are unable to connect to their Solidworks 2019 executable under Application Management. I have a feeling the problem could be rights related because if we run on a computer were the user has admin rights the WGM functions perfect and SW2019 pops up automatically at first startup. Does anyone had the same experience and can share some info with us to resolve? Best regards,Dennis Varkevisser
We are performing use case testing as part of our upgrade to Windchill 12. We have a group of PC hardware and software engineers who need to perform the following activities. We have a WTpart BOM structured like the following;BLD-PROG-123 Qty 1 ea, 232-281-2-16000 FLASH DRIVE Qty 2 ea, 128-1393-2 FLASH DRIVE LABEL Qty 1, ea, 218-229-2 PROGRAM KEY, RED Qty 1, ea, 112-181-2 SNAP RING This structure represents the parts to 'use' to program the flash drives. Under each part there are programming and other 'work instructions' that are performed in the context of the upper level assembly build. What the shop sees in the end is; BLD-PROG-123 Qty 1 ea, 232-281-2-16000 FLASH DRIVE PROGRAM FLASH DRIVE WITH 123XYZ FIRMWARE Qty 2 ea, 128-1393-2 FLASH DRIV
Team I am configuring Security Labels. For the download confirmation popup ("You are downloading sensitive XYZZY information, please confirm'), I have been asked to make some of the words red. Can you use Rich Text in the message, similar to description fields elsewhere? I have tried using a Spring Boot color code "${AnsiColor.RED}" but it does not work. Perhaps a "<span>" tag with some css? Thanks
I'm using Windchill 11.1 M020 CPS 30.Any Suggestions / Solution for below Issue Case:CS54402 (2nd Point) One or more transactions execute a large volume of SQL retrieving small numbers of rows each time, but cumulatively results in a large amount of Method Server memory being usedA log file will show a series, usually dozens of 'StatementCache' lines like the one below for the SocketThread12 thread.The thread name will vary but will usually be named SocketThread##, RMI TCP Connection(###) or SimpleTaskDispatcher###. 'hits' in the line below is a rough estimate of the number of SQL statements sent to the database for processing'RMI TCP Connection': generally a user UI actionSimpleTaskDispatcher: often an EPM related operationSocketThread: usually an InfoEngine taskExample of output: [SocketThread12] wt.pom.statementCache - StatementCache: wt.util.Cache%618734817 [size=50, count=48, hits=239727, misses=84, aged=0]If there an OutOfMemoryError generated
I am using Windchill PDMLink Release 12.1 and Datecode with CPS 12.1.2.2I have created additional IBA for Options purpose.How to use LoadFromFile utility to load "Options" with this additional IBA ??
hi,how do we find wcadmin password from backend.
I've been updating some attributes with WTParts and got this error message in Event manager: Build CAD from Part failed: The associated Cad document (CAD Part - 94805a115.prt, -.2) is authored using an unsupported authoring application. I can confirm that the model is a Creo model and shows authoring application as Creo from 2014. Is this something that fails if models were uploaded using an older version of Creo and never touched since? What version does this work after?
if i create a new epm document, automatically the system creates a new wtpart. i have three types of wt-parts and i want to chance the type. where can i change the link?
Hello all, Im having a hard time figuring out why pdfs generated by the CAD worker on Windchill Server has a different behaviour from the drawings manually printed to pdf from Creo Parametric. From Windchill server, new representation PDF the ptc system parameters doesn't changed with their value, the parameter name remains- &PTC_WM_MODIFIED:BY - &PTC_WM_MODIFIED:ON-&PTC_WM_VERSION:D See the example: But if i do it manually in Creo Parametric, thoses parameters are filled with theirs correct values.Anyone has this issue? How to fix it? Thanks in advanced
I'm trying to create a new view and give it a name which is has more than 32 characters. But it's not letting me type more than 32 characters(including spaces). Is there a way to increase the character limit on the Name?
Decommissioning a Replica server. Got to the spot where you delete the cache folder and get the following: "Can not remove Replica folder, it contains Cached items.". Force sync has been run, Utilities show zero files in cache, and the SQL command in article CS53215 produces no rows. The SQL command in article CS56569 looks promising (delete from masteredonreplicaitem where ida3a4 = <IDA2A2_OF_FOLDER>). How would I get the IDA2A2 value for the folder? This is Windchill PDMLink 11.1.
My files are checked in, and I need to update the revision but they file has a line through it
It's possible to use an AWS S3 bucket as storage for Windchill vaults : Configuring Windchill File Vaults to Use Amazon S3 (ptc.com)But there are no property to change the default URL of the S3 bucket (https://[bucket_name].s3.amazonaws.com) to use a S3 compatible storage available with other cloud providers like OVHCloud or Scaleway.Additionally, it would be great to use a software like MinIO to use S3 object storage in a private cloud or on-premises environment.
I was able to find directions to fix said issue for internet explorer but not Chrome. Please advise.
I have a new application server and DB server, which will soon be the production server, replacing the current production server. This new version of PDMLink is 12.1.2.7 Our current production server, soon to be old and retired server, is at PDMLink 12.0.2.4. We want the transition between using these two servers somewhat seamless. One day, the users will just log into the new server, and all the file vaults will be there. So for this new production server, I manually copied over all the file vaults from the old server. I then go through Windchill to Site > Utilities > File Server Administration > Vault configuration. Unsurprisingly, I don't see the file vaults set up in the vault configuration. No worries, I look to the rehost utility guide for Windchill to see how to remount the vaults I manually copied over. I get lots of failed attempts so I eventually open a case with PTC. They are telling me since I am on a newer versio
We've been using Windchill Projectlink since Windchill 9.0, currently on Windchill 12.1. In previous versions of Windchill, never had any issues with Projectlink. We've noticed the following issues in 12.1-incorrect time stamps for when an activity is completed-completion of an activity does not always trigger the following activity to start using autoexecution-in certain cases an activity completed after the daily working hours, is showing the actual time rather the end of the day timestamp. Our project plans are very straightforward, roughly just 10 activities in a linear order. No objects shared to projects or deliverables. We currently have an open case with PTC tech support which has been open for several months, so far no resolution. Just wondering if any other Projectlink 12.1 users have seen similar issues.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.