Recently active
Hey Community, So I have this service and it has four parameters and one of them is intervalCount, which i have given here 150 but now i want to give an additional interval which would be 50 so i want to run this service twice with 150 and 50 but on success both will give me results. I am confused a bit. what can be the best approach here should i change the service architecture on the thingworx side? to accept as an array or should i do something on experience side to make it run. any ideas are welcome. this service runs everytime i start the expereince and what this service is doing that it takes interval count and divide by total entries to give me modus and if its 0 then i know its 150 product so that i do something on exp side thanks $scope.every50thEntryCounter = function () { twx.app.fn.triggerDataService("QControl.Data.Helper", "intervalCountForProductCategory", { // Hand over variables to the service lineName: $scope.app.params['lineName'], Location: $scope.ap
Hello Community, So i start my experience and fetch the model from thingworx and then jump to new view and there i have this below code to show the sequences in the list but unfortunately it works perfectly fine in browser but not in view app. The view app is unable to show the list of sequences to select.. Can someone please see that what is a problem in the below code? or how can i resolve this issue. As you guys can see binding also in the below from model to show the sequences. The modelLoaded function is not getting executed and that is an issue.@RolandRaytchev may be you have an idea...? angular.element(document).ready(function () { $timeout(function () { $scope.setWidgetProp('model-1','src',$scope.app.params.modelPVZFile); $scope.$applyAsync(); $rootScope.$on('modelLoaded', function() { $scope.view.wdg["spinner-1"].visible = false; console.log("Model and Sequence both are loaded!"); }); }, 100); })
Hello Community, I can say that it seems possible to get the videos saved which are saved in thingworx repository and show in vuforia studio on the video widget. There are 10 videos which i change with the click of a button. What do you think is a best solution that should i get the video on click everytime or first fetch all the videos together and then show it one by one with the button click. i mean store them as an array. Any suggestions in this regard... Problem let videos = [ { id: 'video-2', src: 'app/resources/Uploaded/Illustration-1.mp4' },//1 { id: 'video-2', src: 'app/resources/Uploaded/Illustration-2.mp4' },//2 { id: 'video-2', src: 'app/resources/Uploaded/Illustration-3.mp4' },//3 { id: 'video-2', src: 'app/resources/Uploaded/Illustration-5.mp4' },//4 { id: 'video-2', src: 'app/resources/Uploaded/Illustration-6.mp4' },//5 { id: 'video-2', src: 'app/resources/Uploaded/Illustration-7.mp4' },//6 { id: 'video-2', src: 'app/resou
Hello Everyone,Good Afternoon, I want to send Start Time & End Time of experience from Vuforia Studio into ThingWorx.Can anyone guide me how can I achieve it? Thanks in advance. Regards,Aditya Gupta
hey @GianVal if you have already done with this connectivity would you please give some feedback or write a procedure in steps to achieve this task... from your valuable time. 🙂 My usecase is that i have different PVZ (ilu ) files in windchill and what i want is that to dynamically assign my model in vuforia studio this pvz file so that customer can see animation by playing it. I dont want to upload every time the pvz file in vuforia studio. I want this process to work dynamically. I have been working on thingworx ( NOT THINGWORX NAVIGATE ) and vuforia studio since 1.5 years. Would you please let me know about it that how can i achieve this task so that our customer can get the pvz files in experience from windchill. I have read a quite few docs but its not very clear.
Display your Thingworx mashups confidently in Vuforia Studio (popups, panels, etc.). Translated by the moderation using Google Translate ----------------------------------------------------------------------------------------------- Vuforia Studio에서(팝업, 패널 등)에서 Thingworx 매시업을 표시하고 자신있습니다.
Dear Community, I have one model and i want to walk around it after placing it. This is possible in the Area target which i have tried. But i am unable to walk around the model in Spatial target. Any one has an idea about it? Please let me know... With the camera when i detect the twin its always ahead of me and i cannot walk around it or through it.. Thank you! There is an option called track and i dont know that either i have to bind it with something... please let me know if anyone has an idea about it.
I want to link the file on Thingworx repository to the 3D Video widget of the Hololens project. What should I do?
Hi Everyone,Good Morning, I want the pinger on 2D layout can anyone help me out. Thanks in advance. Regards,Aditya Gupta
I'm using vuforia and unity(2022.3.16) together to do my final year project. when in play mode, the application works however, after i've built the app, installed it on an android phone and given camera access, the screen is black. I can see on the top right corner there's a button I added to the canvas so I'm pretty sure the issue is with the camera. Please help as I do not understand where I went wrong.
I am creating a Unity project with Vuforia for my final year and encountered an issue when the app is installed on my mobile device. The project works in Play Mode, but after building and running it on my mobile device, the screen appears black. However, the texts are still visible.Issue
Dear Community, I have a strange issue that my view app works well for sometime and then afterwards it just get freezes/hanged. Does anyone has an idea why is such a behaviour is coming because in the past it has never happened. Reason may be that experience service has a lot of experiences published? or what could be the reason please give me some suggestions?
Hello Community members, Im a new in this community.Im wrote from Italy and I have a question for your.Can I converted a file .pkg to .iges, .stp, .pk2, .prt or .assembly ?? Thank you for support.
Dear all I think it would be amazing if we have ability to download published projects' project files (for Vuforia Studio) from Experience Service. Occasionally, we need to delete(unpublish) projects from Experience Service to conserve disk space.(And we re-publish them when they're in need again)Before deleting, we need to export and save project files(.zip) from Vuforia Studio to publish again. However, sometimes (like when the project is too old) the project file is not saved as zip file and only exists on ES server.On such occasions, as of now, we need to recover project file from ES server by following steps below.https://www.ptc.com/en/support/article/CS326325Those steps are complicated and difficult to complete, so these "published but deleted from Vuforia Studio" kind of projects are effectively lost and not able to back-up or edit. So I think it would be amazing if we can recover them more easily, by being able to download project files back from ES server.
Hello community,I have just seen this article online: Microsoft abandons Hololens 2 This could have a HUGE impact on Vuforia Studio applications with Hololens 2. PTC, could you please give us more information about it?There will be new devices compatible with Vuforia Studio? Many thanks for considering my request.
Hi Everyone,Good Morning, I want to send data from Vuforia Studio into Thingworx but unless & untill I don't assign es-public-access to thingworx service the data is not getting transferred. So is this correct or what if I don't want to give public access to thingworx service & still transfer data from Vuforia Studio to Thingworx is this possible? Thanks in advance. Regards,Aditya Gupta
Greetings,I’m experiencing performance issues when using a 4K video feed (3840x2160) in Unity with Vuforia. Despite optimizing settings in Unity, the frame rate remains at around 20-25 FPS, even when using high-end hardware. Below are the details:Mac Mini M1 (Apple Silicon, Metal API enabled) and Windows 11 with RTX 4090 and Intel 13th Gen CPU.Unity version: 2022.3.50f1 (Apple Silicon support on Mac, DX12 on Windows).4K feed stutters in Unity, but works fine in OBS.I've tried disabling VSync, optimizing the scene, and adjusting other Unity settings like multithreaded rendering, but the performance issue persists.Is there any specific configuration or optimization in Vuforia that would help improve 4K AR performance across these platforms? Your advice would be greatly appreciated.Thank you!
Hello Community, I have installed the extension CreoViewRWExtension in thingworx platform and it does show a lot of information about pvz file in thingworx but i am unable to get the stepsname and stepsdescription. It does shows a sequence names though and a lot of other stuff. here is the extension link:EXTENSIONhttps://github.com/mvonhasselbach/CreoViewRWExtension/tree/master I have already raised an issue in the community the link is as below for further clearance:- THINGWORX QUERYhttps://community.ptc.com/t5/ThingWorx-Developers/Thingworx-extension-to-compress-videos/m-p/972096# Please let me know how can i achieve that.
hi everyone,I have created the structure as you can see with parentId and id. But i am unable to see the button to expand the rows to see his childs instead its showing me everything in plain entries. Any idea? Tree advanced widget binginds
Dear Community Member,Direct import of 3D file formats such as .obj and .fbx is currently supported by Vuforia Studio, but not the .glb file format. We have a large number of .glb models created for other purposes within the company, which we want to import into Vuforia Studio for AR inspection purposes. Converting these models to either .fbx or .obj, or any other 3D format supported by Vuforia Studio, is possible but very time-consuming due to the large number of models. We strongly request the implementation of a feature to support the direct import of .glb models in Vuforia Studio. If a similar request has already been made within the community, it will be helpful if someone share about the progress. Thank youSandy
Dear All,As of now, we are unable to display PMI (Product and Manufacturing Information) in Vuforia Studio or Vuforia View when exporting from third-party CAD software (e.g., NX) as a neutral file format (STEP 242, JT, etc.). Recently, manufacturers have begun to utilize 3D models with embedded PMI for various design investigations and production operations to enhance clarity and ease of understanding.During the design and production phases, our company has also started to adopt AR applications. Additionally, other AR software can import and display PMI information.For investigation purposes, I have attached a sample part file with PMI instructions. The creation of PMI data is based on the ISO 16792 standard for technical product documentation and digital product definition data practices.I am not sure if PTC has considered implementing this feature or if a similar enhancement request has already been submitted and is known to the PTC R&D team. If anyone has information on this mat
Dear Community My goal is to streamline the process of creating AR experiences, ideally the users wouldn't need to open the Vuforia Studio Editor to create Step by Step instructions. Is there a "best" way to extract all the information from the PVZ file using JS? For example "step_acknowledge", or which parts are needed for each step, like a BOM of Parts the user needs to install for each step. This is visible in the animation track in creo Illustrate. step_name and step_discription is available with parsedArg3 Thanks for your help! Alex
Working in Vuforia Studio in 2D. Using the Hyperlink widget. I want to click on the hyperlink and I want the link to take me to another experience. I am using the link info in the Share pulldown. I grab that infor and go to Events and in the JS I insert that link info for the experience - vuforiaview://ptc.com/command/view-experience?...In the Preview I can run it and I will be able to get the Experience that I want to load with the hyperlink - but it will be the Vuforia Studio Experience? I assume it is linking and should work in the 'real world' - not the Studio version? I publish the experience and place it in my downloads. I open the 2D experience and when I click on the hyperlink...my Apple says it can not find the link using Safari??? Or something to that effect??? I there something I need to do with the Apple? With my link? What do I need to do differently to make this work - and open the link? 
Hello,Good Morning, I have offline downloaded AR experience created using Vuforia Studio in Hololens 2 Vuforia View app. Whenever I click on a button to set the sequence in Hololens 2 the system sometimes work & sometimes it goes blank. Can I get any help on this. Best Regards,Aditya Gupta
I'm trying to create an experience on Vuforia Studio where the user can search for a part name. The value is typed in a text input, when you start typing a drop-down menu opens with the part names that match the requested value. Subsequently the user can choose the value from the displayed menu and upon clicking the text field is completed and the model element is highlighted. Can anyone who has already solved this problem help me?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.