Recently active
I am trying to use vuforia step check and mainly trying to create a line using paper pieces and if the line is intact i should get a green tick and if the line is distored i need to get a red tick. (Attached good and bad image). when we try to use the point marker it will be indicating the specific point. how can we do this for the entire plate as shown in images?
Is there a way to upload a Vuforia Capture without using USB ports?
Vuforia Editor New Step Check (Beta) Mode in Step Check Settings From Step Check Settings on the Step Check tab, you can now select a mode for Step Check. The following modes are available: Setup—this mode enables guided training to help train the step Active—once the step has been trained, switch to Active mode to display the Step Check results in Vuforia Vantage Along with the new modes, you can also select the type of Step Check results that are displayed in Vuforia Vantage, enable or disable data collection, and view the Step Check status of the step. For more information, see Step Check Tab. Vuforia Vantage iOS: The image captured using the iOS Vantage image feedback feature has been improved to around 4k*2k resolution. HoloLens: The images captured using the HoloLens 2 Capture app have been improved to around 1080p resolution. Step card UX/UI has been improved to make it more compact and use less screen space, in addition to including more text by defau
Hello, do deleted assets in the deleted assets folder of the Vuforia Editor disappear after a certain amount of time?
Vuforia Insights Updates and Improvements to Viewer Insights Page The VIEWER INSIGHTS table on the Viewer Insights tab now displays procedure sessions that are currently in progress and any that were deleted by the end user A new STEP LAST VISITED column displays a timestamp to indicate when the user last visited a step The VIEWER INSIGHTS table now displays a LAST MODIFIED column that displays the date and time that the session was last modified. Previously, there was only a COMPLETED column which displayed the date that a session was completed New filters were added to the top of the VIEWER INSIGHTS table The following columns in the VIEWER INSIGHTS table have been updated PROCEDURE STATUS will become PROCEDURE PASS/FAIL DESCRIPTION will become STEP DESCRIPTION MEDIA will become STEP MEDIA Vuforia Editor Mandatory image feedback for Step Check steps Authors can now require image feedback for steps with Step Check enabled Vuforia Vantage The text and image feedback but
Is there a File Size Limit for Video uploaded to Vuforia Editor?
Hi Community,I am looking for a solution/ best practice on how I should solve the issue of tracking an enormous object. The object that I would like to track is over 40 meters. Is it even possible with Vuforia? (I would like to use Unity 3d with Vuforia, on an iPad Pro)Best wishes,Marton
Vuforia Editor Updates and Improvements to TASKS Page The following updates and improvements have been made to the TASKS page: Approved, Cancelled, Rejected, and Pending candidates are now displayed The following filters are now available for the TASKS table: Filter By Status Filter By Role The USERNAME column now displays the name of the user that created the approval workflow with Submitter next to their name The TIME STAMP column displays: The time and date that the approval workflow was created if the row is for a Submitter The time and date that an assigned approver completed their task The TASKS table is now sorted by TIME STAMP Updates and Improvements to Step Check (Beta) The following updates and improvements have been made to the Step Check functionality: Blurry images captured during training are now automatically discarded before uploading to Vuforia Editor The Step Check Settings section has been moved from the PUBLISH tab to the STEP CHECK tab Improved us
Currently it is not possible to delete multiple selected assets. A delete operation can be performed only on individual assets. Deleting a folder with existing content is also not possible. So it is very tedious to delete numerous elements. It would be a relief if simultaneous deletion of multiple assets is supported.
Vuforia Vantage is now available on RealWear! Users can now playback Vuforia Expert Capture procedures hands free on the following RealWear devices:HMT-1 running Android 10HMT-1Z1 running Android 10Navigator 500 running Android 11Vuforia Vantage on RealWear allows users to provide feedback that will be captured in Vuforia Insights. The feedback options supported for Vuforia Vantage on RealWear are:ConfirmationPass/FailText and ImageFor more information on Vuforia Vantage for RealWear, check out the below Vuforia Expert Capture Help Center topics:Vuforia Vantage for RealWearView a Procedure with Vuforia Vantage for RealWearNavigate a Procedure in Vuforia Vantage on RealWear DevicesSign In to Vuforia Vantage on RealWear DevicesVuforia Vantage for RealWear Step Feedback
Currently uploading multiple files using drag & drop fails. Only one of the selected files is actually uploaded. This was reproducable in Google Chrome and Microsoft Edge.
I am trying to list the content that has been shared with all users in Vuforia Editor. But when I switch to the "Public" section the listing of the assets never completes. The spinner is there for hours.Am I the only one with this issue?
It would be a nice feature to be able to give location markers recorded on HoloLens a name.
Is PTC considering extending device support to the Meta Quest Pro mixed reality headset?
Vuforia Editor More efficient Advanced Model Target training with training lengths varying between 20 minutes to 4 hours. Step Check (Beta) is now available for Vuforia Instruct users, allowing them to use AI (artificial intelligence) to assist users in visually verifying if a step in a procedure has been performed correctly or not. Vuforia Vantage iOS 16 is now supported for Vuforia Vantage You can now reset tracking in Vuforia Vantage on HoloLens 2 devices. Use the Reset Tracking button or the "Reset tracking" voice command to reset the tracking for Area Target locations. Vuforia Insights A new Audit History tab is available that displays a table of meaningful events throughout the lifecycle of a procedure. New events will be logged as users perform the following actions: Create a procedure Publish or unpublish a procedure Create a new version of a procedure Approve, reject, or cancel a release candidate Archive or delete a procedure Settings A new setting is available to e
When you create a folder in Vuforia Editor, you can add a description to it. This works without any problems. Where can I modify this description after creating the folder? I am grateful for any advice. Feature suggestion: The content of the description should also be taken into account in the search and should be able to be displayed as a column.Thank you.
Hello -- I am unable to change a user's role in Vuforia Editor to Administrator (or back to Manager from Administrator) even though I receive the message that the role change has been successful. We currently have six people with the role of Administrator.
A new Settings page is available to Administrators that gives them access to a Product Settings tab allowing them to manage product-specific settings that are unique to Vuforia Expert Capture and/or Vuforia Instruct Major UI updates and improvements have been made to the Procedure Editor pane making procedure authoring more efficient and intuitive Ability to set a custom viewing position for 3D models New Model Settings window allows you to select a pre-defined orientation for a model in a procedure Support for e-signatures for organizations that have SSO enabled Vuforia Capture for RealWear HMT-1 and HMT-1z1 devices now support the ability to store Capture files on SD cards Android 13 is now supported for Vuforia Vantage on mobile devices Android 8.1 is no longer supported for Vuforia Capture and Vuforia View on RealWear Devices Italian and Simplified Chinese languages are now supported for Vuforia Capture and Vuforia Vantage on HoloLens 2 devices Bug fixes and minor improvements
I want to know how I can integrate a QR code reader in the quality control process with Vuforia Instruct.For example, at the beginning of the process, I want to read the serial number of the product with the QR code reader, after that, I should have a list of the quality processes of this product with Vuforia Instruct.Next, I must select an option from the lists and start the QA process with Vuforia Instruct.
Approximately between the hours of 8:43 - 9:40 ET (12:43 - 13:40 UTC) Expert Capture and Instruct users were unable to access the applications after logging in. This issue has been fully resolved and access restored. We are actively investigating ways to prevent future occurrences of this issue. Please contact PTC Technical Support for any further issues.
¿Is possible to match the code o serial number of the product with quality inspection in Vuforia Instruct or with Vuforia Expert Capture when is used to assemble?¿How do I do it? ThanksAlejandro Diaz
The following changes have been made to the ability to delete procedures: Only administrators can permantently delete a procedure that has been published one or more times Authors and managers can delete a procedure that has been published one or more times from the asset library. Once deleted from the asset library, the procedures are moved to the Deleted Assets tab which is only visible to organization administrators. Procedure creators (authors, managers, and administrators) can permanently delete procedures that have never been published Spanish and French languages are now supported for Vuforia Capture and Vuforia Vantage on HoloLens 2 devices Bug fixes and minor improvements
The planned system maintenance is complete. Vuforia Expert Capture and Vuforia Instruct system maintenance is scheduled for Tuesday, August 30th at 10PM Eastern Standard Time. The maintenance is expected to last 90 minutes or less. During this time, anyone trying to access the Vuforia Admin Center, Vuforia Editor, Vuforia Insights or Vuforia Vantage Web will be redirected to a maintenance page. Anyone trying to access procedures using the Vuforia Vantage App will be presented an error message. We apologize for any inconvenience and hope the advanced notice will allow you to plan ahead as necessary.
Authors can now create approval workflows to route procedures to managers and administrators for approval. Once all required approvals are obtained, the procedure is automatically published and available for viewing. Approval workflows also help preserve records of approvals for future reference and audits. To initiate an approval workflow, you first need to assign approvers to your procedure. You can assign approvers from the DETAILS tab of a procedure. Once approvers are assigned, the approval workflow can be started from the PUBLISH tab. You'll also notice a new Tasks Tab within Vuforia Editor. This tab allows you to see all open approval requests that require your attention as well as any approval workflows that you've created. For more information on approval workflows, check out the links below: Tasks Page Create or Cancel an Approval Workflow Approve or Reject a Procedure Approval Workflow States and Details Approval Workflow Tro
New Approval Workflows for Routing Procedures and Automatic Publish Authors can now create approval workflows and assign managers and administrators as approvers to a procedure. Approval workflows help create and preserve a record of approval for future reference and audits. Once all assigned approvers have reviewed and approved the procedure, it is then automatically published. Support for German and Japanese Languages for HoloLens 2 Apps German and Japanese languages are now supported for Vuforia Capture and Vuforia Vantage on HoloLens 2 devices. Bug Fixes and Minor Improvements Other minor improvements and fixes.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.