Recently active
Request for Vuforia CaptureI think that it would be helpful the video being taken with HoloLens to be displayed on HoloLens.(I would like to display the video I am taking with HoloLens in the corner of the HoloLens screen.)
Request for Vuforia EditorI think it would be useful to have image editing functions like EXCEL.(The angle and length of the speech balloon protrusion can be changed, etc.)
Vuforia Editor Audio Recording Enhancements for Video Clipping Video clipping capability has been enhanced to allow users to record new audio for a portion of a newly created video clip. Users will now be able to select a specific start and stop point for the new audio recording and will be able to retain the original audio stream from before and/or after the new recording Step Check™ Enhancements Step Check training images displayed in Editor are now delivered via *.cloudfront.net Step check validation areas are now moved while the associated point of interest is being relocated. Prior to this change, the validation area would only be relocated after the point of interest was dragged and dropped. Error messaging has been added to the STEP CHECK tab to communicate when errors occur during training a Step Check-enabled step. Advanced Model Target Reuse Enhancements Advanced Model Target reuse behavior has been updated to ensure that a new Advanced Model Target is not generated w
Vuforia Editor Increased Timeout When Uploading Assets to Allow for Larger Files The timeout when uploading files has been increased to allow for larger files (such as 3D models) that may have previously timed out. Public Filter in Left Navigation Pane Renamed The Public filter in the left navigation pane of the asset library has been renamed to Shared with all, and the icon has been updated. Note: The icon will also be updated on the list/tile view of the asset library, as well as in the SHARE window used to share assets/procedures with the entire organization.
Is there a way to generate an email notification when a procedure is sent for approval/publishing (i.e. I would like my org's designated approver/VEC Manager to receive an email when action is required of them in the Approval Workflow)?
Is there a way to disable devices downloading procedures locally?
Requesting an improvement for Vuforia Expert Capture:While making instruction videos it would be helpful to be able to have the end users skip directly to certain steps with a method similar to selecting a pass/fail. This would allow for short, temporarily divergent instructions to be given and followed based on alternative scenarios that the end user might encounter. Example: Step 7: If you have been supplied with an order that requires: 'x', proceed to step 8, and follow steps 8-11. 'y', proceed to step 12, and follow steps 12-14. 'z', proceed to step 15, and follow steps 15-18. At steps 11, 14, & 18, verify completion and proceed to step 19, using a selec
Hi Everyone I had some queries regarding what is serial ID and its importance in Vuforia Expert Capture.Can anyone brief me about this. Thanks in Advance.
Hi Everyone, I wanted to ask what is the size limit of text and image feedback in Vuforia Expert Capture. Thanks in Advance
Is it possible to bring the data from Vuforia Expert capture to ThingWorx mashup?As per my understanding Vuforia Expert Capture is on PTC cloud, it doesn't provide any On Premise solution.My requirement is I want to integrate the Vuforia expert capture data like videos, instructions, snaps, photos into ThingWorx mashup. is it possible to do so? i know its possible somehow....how to achieve this?can anyone help me to know more this integration? @sgreywilson
Submitted on behalf of a customer: Branch Selection- Another of our application I manage and is use globally has a branch option. I use this for language selection allowing us to maintain one application with the capabilities for 12 different languages.
Submitted on behalf of a customer: Right now we are not using Expert capture as it is intended because of the limited functionality of your editor. And are using two third party editors to prepare the video prior to upload. We need Pan, Zoom and Blur options within the editor. Also a text to speech option.
Submitted on behalf of the customer: We need to ability to Group the Procedures by Equipment. For example we have 13 Procedures currently tied to the MCD line of equipment. We would like to categorize that under MCD. We have over 300 different types of equipment we will eventually have procedures on and the alphabetical listing will not suffice.
Enhancement Request: I have a customer that would like to be able to log properties while using expert capture. They would like to be able to add a property field (or multiple) to be required to be logged at each step. They are aware they could use comments to accomplish some of this functionality but it is not easy to sort through on the back end or use once it is entered and it is easy for the user to mess up entering data.
Hi, I'm trying to publish a procedure by using vuforia editor. So, It ask me approve a manager in order to get the QR code. After my manager approval also it doesn't publish and didn't showing the QR code to test them in Vantage. Is there any reason? @mghadge @hngo @suji
Vuforia Editor Asset Library Filters Now Persist During Navigation Asset library filters have been enhanced to ensure that a user’s selections remain selected as they navigate folder structures and/or the left navigation options (My Editor, Created by me, Shared with me, Public, Deleted assets). Deep Linking is Now Displayed in Address Bar for Several UI Components New deep link functionality has been added to open several components using URL parameters. When navigating the procedure, the URL shown in the address bar of the browser window will always update when selecting different tabs (EDIT, STEP CHECK, PUBLISH, DETAILS) or step cards. Browser history is also supported—clicking the back button directs you to the procedure tab that was previously open. Browser Tab Now Displays Additional Procedure Details The browser tab has been updated to display additional details about an open procedure including the procedure name, procedure tab (EDIT, STEP CHECK, PUBLISH, DETAILS), and
What's up, guys? So I would like to know if anyone has knowledge of how to activate this second globe of guided training, because in my training there is only the most distant globe and does not appear the second globe that has a precision for capturing short distance images.In the image captured from a PTC video, we can see 2 globes.
Please make sure to update your Vuforia Vantage and Vuforia Capture Apps to take advantage of all new features Clickable Links: Focus on the job, not finding the information to do itThis release we are super excited to announce clickable links within procedure steps! You can now add links that will direct frontline workers directly to content outside the procedure. This is big news, as there are huge possibilities outside linking to additional documentation materials... For example, if your Step Check inspection identifies an item that needs to be maintained or repaired, you can now link that failed step directly to a Vuforia Studio or Vuforia Expert Capture maintenance procedure for that case! Try it in Editor Library View in Vantage Web: Give Frontline Workers instant access to all their proceduresLibrary View is a cool new feature that allows frontline workers to easily access all relevant procedures directly on the web platform - without needing to be
There will be a planned outage of 4 hours on Saturday, July 1st as part of the Vuforia Expert Capture 3.7.0 release and the initiative to create a more seamless identity management and authentication experience. We acknowledge the inconvenience and have attempted to schedule for a time of minimal impact. With the 3.7.0 release, new versions of the Vuforia Vantage and Capture apps will be available. We recommend you update to the latest available on all of your devices. Devices running Vuforia Vantage and Capture 3.6.0 or lower will no longer work. Also, be sure to update any allow-lists that your IT department maintains for application access. For more information, see Network Configuration Requirements in the Vuforia Expert Capture Help Center.
An equipment manufacturer or SI company is trying to provide VEC as a service to their end user.Is it possible to set it so that each customer(end user) does not share content?Even if some premium users are assigned to the customer company, I want to prevent content sharing.Please check if it's possible.
On July 1st, 2023, Vuforia Expert Capture will be migrated to a new platform. To avoid usage interruptions of Vuforia Expert Capture apps, the following actions need to be taken by July 1st, 2023: Upgrade Vuforia Capture and Vuforia Vantage apps to version 3.6.1 Update your company allow-list for the new platform URLs https://vuforia.ptc.com/ https://api.ptc.com/ https://portal.ptc.com/ https://ptc-atlas-prod.us.auth0.com/ https://*.ptc.com For more information, see our Help Center topic Network Configuration Requirements. After July 1st, 2023, previous versions of the Vuforia Capture and Vuforia Vantage apps will no longer work.
Does anyone have experience with CInema4D (*.c4d) files and getting good results with converting models to .stl or .obj files? Any tips/tricks would be greatly appreciated.
Step Check is now available within Vuforia Expert Capture! Authors can now enable Step Check on steps within a procedure that require pass/fail assessment. Images captured during procedure execution are then used to train an AI to recognize when a step in a procedure passes or fails to meet a certain standard. The following diagram provides a high-level overview of the current Step Check flow. For more information, and to see Step Check in action, check out our Step Check Introduction video.
With the latest 3.6.0 release, the Vuforia Expert Capture and Vuforia Instruct products are converging into one product: Vuforia Expert Capture. All Instruct features and capabilities are now available within Vuforia Expert Capture. The table below explains what, if any, changes to expect:
General: Vuforia Instruct Features Now Included in Vuforia Expert Capture Beginning with the May 2023 release, all features and capabilities that were available in Vuforia Instruct will be consolidated with Vuforia Expert Capture. The table below explains what, if any, changes to expect: For more information about the product consolidation, see Vuforia Instruct and Vuforia Expert Capture Consolidation. Step Check™ Official Release and Updates Step Check is now officially available to all customers and is no longer in beta! Other updates to Step Check include: The Step Check mode that has been set for the step is now displayed on the step card A new menu is available for markers on a step with Step Check enabled which allows you to either remove Step Check and the point marker, or convert the Step Check and point marker to just a point marker. For more information, see Step Check™. Vuforia Editor New Organization Setting to Require Review and Approval Before Publish
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.