最近活跃
For non-PTC hosted customers, having the ability to script a fresh install or upgrade process would be ideal to help create an Infrastructure-As-Code model of support. Ideally, it would be something that could be scripted and called by Ansible.
Good day to the community. I wanted to reach out to see if others had a solution for leveraging quota arrangements between suppliers. With continued supply chain challenges we are wanting to plan for ordering the same part from multiple suppliers based off a percentage. For example, we may want to procure 60% of our orders from Supplier A and 40% from supplier B for a particular SKU. The percentages would vary by SKU. As we integrate into multiple execution systems, we are looking for a solution on the planning side to be able to leverage universally.
Would like to have the ability in the order plan functionality to plan against multiple suppliers in a multi-sourcing strategy. The requirement would be to be to suggest 60% of the orders for primary supplier and 40% for secondary supplier.
If you want to plan with new hierarchy as of a certain point in time in the future, the system must realign the data for the demand history of the affected skus. If, for example, you change the entry location within your hierarchy, your hierarchy changes. Due to this change, the demands of the previous and new entry locations may change. For each location product of the hierarchy, the system must create a demand history up to the point at which the new hierarchy is valid and a demand history as of the point at which the new hierarchy is valid.
Functional Overview and Business Need: SPM does not provide summarized information of the planner's work queue and its status (reviewed, not reviewed). Need to streamline workflow. Provide orders' summary information. Provide trend information on spend history and projection. Provide information on key exceptions (backorders, critical shortages, excess etc.) Benefits: It provides a dashboard view of the summary information and workflow guidance. &nb
Functional Overview and Business Need: Recent releases have had improvements on planner workflow and planner productivity. SPM does not directly report/ measure planner productivity. Many customers use custom dashboards linked to SPM. How do you measure planner productivity?: Number of pairs reviewed Number of actions taken Age of high impact actions/ review reasons? Is it better to measure parts (or SKUs) with exceptions, rather than the number of exceptions Measure how long (on average) things are in the queue or how long it took to be actioned. Risk of reporting planner productivity: Performance measures influence planner behavior, for example planners putting overrides to show they have worked. Benefits: It provides a mechanism to measure planner's productivity.
(view in My Videos)
IN order to provide the utmost security in connections ofSPM, there is a desire to use SSL connection between AP/WebUI and Oracle database when hosting on AWS RDS.
https://community.ptc.com/t5/Welcome-How-To-s/Getting-to-Know-PTC-Community-Ideas/td-p/607208
Based on our understanding when demand detail is loaded, there is not native functionality to roll up the demand to aggregated levels. The request is to add standard functionality which takes the demand detail and aggregates the information into the demand history tables.
Functionality Overview Ability to apply space constraints by location (and segment) so that stocking plan fits within the space Application Service Engineer Vans, Small Field Stocking Locations (Closets), On Board Inventory on Aircrafts etc. Part closets planning which store parts for line maintenance. Some clients require to maximize the use of containers/boxes used to transfer the stock from one location to another. Dealers locations generally have small stocking space. Benefits Create an optimal plan for space constrained locations making sure that stocking plan fits in the space Reduce the need for manual intervention to change the unconstrained stocking plan to fit space Understand the impact of space constraints on service levels
On 4/7/2022, Vinod Arekar led and facilitated a roundtable discussion with Servigistics Airline customers on the challenge of network design that Airlines often face. These are the slides that he used to position the discussion.
Slides attached and recording below! Feel free to use the discussion feature for feedback and questions. Agenda: Opening Comments – Tracy Hartwell Servigistics Update – Bradley Rhoton Release Updates – Vivek Dube API Based Integration – Dave Zawalski/Steven Masters CAG Community Site (Ideas Area) - Tracy Hartwell (view in My Videos)
Functional Overview:Connected SPM feature which will generate a short term and medium term and long term forecast for maintenance events and Life Limited PartsView removal rules and remaining lifeProvide visibility to future removals by equipment and by serial number for a partAbility to adjust removal datesReview potential parts shortage that can impact removalsUse serialized condition/utilization of assets to predict the next event, and use utilization projections and maintenance policies to forecast future eventsFeed the removal forecast as data input to SPM as LLP forecast or Event ScheduleApplicationIndustries with preventive and condition based maintenance like A&D and Heavy EquipmentLife limited parts/modules that need to be replaced/repaired after certain utilizationExample of LLP parts: Tyres, Batteries, bearings, engine blades, landing gears, fans etcBenefits:Accurate LLP forecasts and event based forecasting of partsIncrease visibility and coordination between main
Functional Overview Ability to set service targets for off-shelf fill rate at demand facing locations and fill rate from back-up locations. For example you can set a target of 85% off shelf fill rate and 95% from 1st referral location and 99% from first and second referral location Optimize stocking plan mix and quantity at demand facing location and back up locations accounting for the additional demand the referral locations will see. Ability to set differentiated service targets by segments of parts (service groups) Visibility to planned off shelf fill rate and fill rate with back-up locations Application Most high-tech and critical service environments where demand does not get backordered but gets immediately transferred to back-up locations Benefits Optimal support for differentiated service targets such as 2hour, 8 hour, Next Business day Additional demand seen by back up locations is planned for and does not cause service loss at these locations Accurate pred
Functional Overview: Generate an aggregated forecast using aggregated demand at a specified level in the location hierarchy and create a disaggregated of forecast for child locations Disaggregation could be based on multiple options including last several periods of demand etc. Use Best Fit Methodology to generate the aggregated forecast Ability to override the aggregated forecast Use Best Fit at child location to choose between disaggregated forecast and locally generated forecast Application: Industries with lot of slow moving items at forward location and do not use causal forecasting For some service organizations it is useful for their planning process to manage the total forecast in a region/globally rather than bottom up forecasting. Benefits: Improves forecast accuracy for slow moving items when causal forecasting cannot be used Good mechanism for disaggregating the forecast where clients does not have install base information Sometimes trend or seasonal patte
PTC is aware of the recently disclosed security vulnerability related to Log4j, the widely used Java logging package. The details of the potential impact of this vulnerability can be assessed at https://go.ptc.com/log4j There are Servigistics Product specific impact and remediation steps located on: https://www.ptc.com/en/support/article/CS358886 (PTC Support login required). For Hosted Clients communication has already taken place and you can ignore this email. If you have any questions or concerns, please open a ticket through PTC’s Technical Support portal.
Throwing up a hail mary because I am not sure PTC Support will be able to replicate the issue. On my scenario summary screens, parts summary, location summary, scenario summary my first two columns or so have a different row height than the rest of the columns with data. This makes it very annoying reviewing the results of any scenario we run. Wondering if anyone ran into this issue and had a quick fix or possible browser setting fix. Will attach images of the screens
These slides are similar to what was presented at the Sept-2021 Release Announcement Meeting. There are some mods/adds in this version. These slides were used as a guide for the Q/A session, but not presented in detail.
Thanks to to customers that volunteered to participate in this focus group. Here are the slides that were reviewed from the first meeting that took place today.
Slides from the 9/13/2021 Customer Advisory Group meeting. Recording also available and split in 2 parts.
We have brought some changes to this category; We are changing the name: from: Service Parts Management Advisory Group to: Servigistics Customer Advisory Group - SPM We are renaming this discussion forum and the idea board to reflect the new category name.. We are also consolidating the structure by bringing the blog topics into the discussion forum. The ideas will remain separate.
Servigistics Service Parts Management and Service Parts Pricing 12.2 has Released! August 18, 2021 Key Highlights Service Parts Management Service Parts Pricing Usability Enhancements Planner Home page Enhancements Advanced layout allows planners to have configurable layout and improve usability More backorder root-cause categories added for Backorder Categorization container Email Integration Send an email message using default email application from any Servigistics page. Customized email templates available for the Interactive Planner Worksheet and Stocking Policy pages New Inventory Collaboration View Inventory collaboration view facilitates exception-based review/ override/ approval of stocking levels and allows internal and external partners (such as dealers) with granted security access Forecast Worksheet Running I-Plan after providing an override refreshes all the panels including graphs with latest forecasting results Best Fi
org.apache.catalina.startup.HostConfig deployWARINFO: Deploying web application archive WebUI.war No properties path set - looking for transactions.properties in classpath...transactions.properties not found - looking for jta.properties in classpath...Failed to open transactions properties file - using default values
Excited for this new feature, but we are finding the Enhanced supply chain modeling feature documentation details are lacking steps to help us use it. We have many questions around the tactical use of this new feature. Can a more in depth guide be developed? Topics such as: proper steps for standing up Sandbox, linking the URL and schema, snapshot statuses (specifically what causes snapshot to fail), what does Schedule Run do for you?, what are the custom values for setting up the Modeling Instance?, I'm sure there are more that the community could come up with. Many thanks!
已经有帐号?登录
还没有帐号?创建一个帐户
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.