Récent
When scrolling long pages, it would be helpful if the header area did not scroll so that the grid/waffle menu was always selectable. This would be similarly helpful under License Management for the 2nd level header menu to remain visible at all times.
Please add a feedback widget (or something similar) to the Product Advisor - Release Matrix pages. Currently there is no obvious way to provide feedback on these pages (for good or bad.) Mock up: Please also make the PTC logo on the top right 'clickable' like it is for other support pages. This allows easier access back to https://www.ptc.com/en/support.
The user would like to have Quick Search immediately active so that when you open Windchill you can just type away without needing to move your mouse and click on the Search field?
Please provide a way to see what has changed when new versions of KB articles are released. Today we can see the last modified date on articles and also be notified (via email) anytime an article is updated, but there is no easy way to tell *what* actually changed. This is especially challenging with longer, multi-page articles. This concept has been discussed on and off since 2017. It would be great if something could actually be implemented. Thanks. https://community.ptc.com/t5/PTC-eSupport-Help-Discussions/Your-Feedback-Requested-New-Article-Viewer/m-p/443918/highlight/true#M604 Many platforms offer the ability to view previous versions. We used to have this here on the PTC Community when Jive was used for the backend. There are plenty of platforms that offer this kind of functionality. https://en.wikipedia.org/wiki/Help:Page_history https://help.salesforce.com/s/articleView?id=sf.knowledge_article_versions.htm&type=
When we track an object using subscription, it could be useful to be alerted when an object is added to a Change Object. In this case User could be informed that Change is created on the object pior to start the validation Workflow.
For years, I have complained about the PTC.com user interfaces being totally confusing and it looks like they are still not any better. I have interfaced with PTC.com and their various training websites for about 11 years now and have noticed that: 1) once you get to the url you need, PTCU is great, but... 2) finding the exact url you need from PTC.com is nearly impossible. You guys have all these marketing names and wonky urls for seemingly the same thing (e.g. PTCU, LMS, Learning Connector, Learn, etc.). I couldn't even find the login button when recently visiting PTC.com to access my upcoming private training class. Come on guys - the login button for accessing an existing (or creating a new) account is a basic, universally-accepted functionality for any website. The process interface SHOULD BE: 1) go to PTC.com, 2) be presented with a sign in/login button somewhere on the screen right away, among the other options, 3) have ONE, SINGLE training/learning mascot/buzzword (i.e. PTCU) f
Please consider either changing the software download names to match the thing they are for or including the file download name somewhere in the description on the download page. Today there is no correlation between the two making it very difficult to tell what has already been downloaded and what is still needed. (Hovering over the 'HTTPS' download link does not show the target file name.) What I click on: What actually gets downloaded: Today I have to extract each zip file and then interrogate the version.xml file to figure out what to rename the folder to. It would be so much simpler if the download files were already named this way. After renaming everything:
We would use the setting "force.update.metadata.on.open=No" (winclient.ini) to open CAD-Assemblies faster, but this setting is returning wrong values for system-attributes like Lifecycle-State. The setting to "Yes" is taking much more time for opening large assemblies, but all values for the attributes from the Windchill-system are correct displayed in the CAD-Application. Is it available to differ both behaviors with an additional setting or add a new button "update system attributes" after loading the assembly (without CheckOut)?
When creating a new case there is a new green button, no title, no tooltip. It seems to be for browsing through the suggested articles, but it is strangely positioned. I suggest to put it under the leftmost window with the suggestions and label it properly so users recognize what it is for.
The article feedback dialog ("Was this information helpful") should be horizontally extendable in a usable way. Right now it can only be extended vertically - any horizontal extension goes beyond the window border because of the spacing. Also, there should be feedback when the text has been committed. Right now the window just disappears. When I've commented/rated the article, I can't comment/rate it again without seeing my previous comments.
Meaningful / speaking file names should be used for the documentation. Current situation (example): 5C0593F1C8D041FF8378FA830B724AE0.pdf ((11.1 M020) Windchill Software Matrices) Recommended: Windchill_Software_Matrices_11.1_M020_2020-04-09.pdf So it is possible to store this documents hierarchical in the personal file-system (and find them again).
User has tried to access object which they don't have access and Windchill has displayed OOTB error message which is not clear to user. We would like to have information like below on attached screenshot. Carrier Engineering Systems Request (Help Desk) Login esr@carrier.com +1(315)433-4347 +1(866)946-9968 toll-free USA
Please do not remove obsolete articles from the support knowledge base. Instead of removing them... Update the existing article with the new information (or) Mark the article as 'Obsolete', but leave it available for future reference (my preference) If it must be removed, at least link directly to the new replacement article from the old article number. KB articles and their related hyperlinks should be consider "permalinks". These should stay valid forever. Even if the information no longer contains the 'approved' or 'supported' technique, the information may still be valid and useful, especially for those who may not be running the latest releases of PTC software. We build documentation around these support articles and when the articles suddenly disappear it becomes exceedingly difficult or even impossible to understand what was being described. I really don't want to start storing separate static copies of every KB article I refer to. I
So often when helping someone on the community one of the suggestions is creating a help ticket. Sometimes people will offer to create a help ticket for someone, but it seems like a good idea to have a tutorial so that anyone on maintenance following these instructions could create their own help ticket. That way one could just link to the tutorial when suggesting that they create a ticket.
It is good to have "Via keep out" routing layers information in EMN file export and in IDX file export. As most of our users need this information while exporting the EMN file for sharing it with ECAD team. As of now this information is lost when we do the EMN file export and there is no way we can add this information in exported EMN file. As per the case #14990483 support engineer confirmed "Via keep out" does not support Routing Layers (according to the IDF 3.0 spec). These attributes are ignored because they are not applicable for Via Keep Out. And IDX also works the same as IDF (.emn). This means the routing layers (TOP/BOTTOM/BOTH/INNER/ALL) and board side (TOP/BOTTOM/BOTH) attributes are not applicable for "Via keep out" as per IDF spec.
Hi, I am looking for modelcheck parameter for drawing scale, when the user clicks on modelcheck interactive a warning should popup showing non-standard drawing scales of that particular drawing.
When working in a Solidworks session, using the Windchill Workgroup Manager for Solidworks package, there is not way to insert a Creo model, into the SW session. This capability is available outside of the workgroup manager, when performing the same function from a local disk. It would be nice, for customers that have the WGM for SW, and using PDMLink as their main PLM took, to be able to insert the Creo model directly from the SW file explorer vs having to save those models to disk, either naively or as STEP model, and then inserting into their SW assemblies.
Minitoolbar for Layer and in Import Data Doctor for Example to hide\unhide quickly layers, surfaces or other entities.
In Case creation, it should be possible to upload files via drap&drop like in the PTC Global Support Secure File Transfer ("Drop Files Here"). Also, it should be easy to insert/upload screenshots (e.g. via copy/paste,) so I don't have to save it locally first to be able to upload it.
Suggest posting site status notifications to the top of the PTC Support portal indicating whether important sites like Software Downloads or License Management sites are down.
Please consider changing the statuses displayed on the "My Active Requests" filter to actually correlate with the real case statuses. Instead of these: Show the actual case status:
Navigate does not support creating Saved Searches criteria, however only retrieves existing Saved Searches from Windchill. Not part of Thingworx Navigate functionality. We have created custom part search application by passing search criteria from user interface to fetch the part information from windchill application,user needs saving the user searches
Google Traduction As administrator, how can I get statistics on the use of Creo parametric licenses?Thank you for your help.
We have recently updated to Creo after having used Creo 3 for a few years. The behavior of Creo 3's preselection and pick from list was identical to that of numerous previous versions. Creo 4 has brought sereral important changes. Some of them are welcome, for instance that surfaces are now the first geometry items in the list to pick from. Great improvement. But I notice 2 things that make me miss Creo 3 : It is now impossible to preselect vertices. Vertices may not be as frequently selected geometry items than surfaces or edges, but they are certainly worth keeping in the list. One thing I used to do a lot in Creo 3 was to select (preselection) a component in an assembly, press "ctrl" and select one or more other components, and then perform an action. It seems impossible to do that now. I select the first component, hover my cursor over other components so that I see them highlight, but as soon as I press "ctrl", component highlighting stops and it's impossible
Would like to be able to tailor the OOTB navigate tile labels to better match customer users term ology.
Vous avez déjà un compte d'utilisateur ? Connexion
Pas encore de compte d'utilisateur? Créer un compte
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.