Récent
This is a frequently asked question in the community and usually the answer is to use a script or to use some kind of programming.This can be done just with mapkeys, with some limitations:The method I used was:1 - Create a mapkey to create a new drawing. The problem here is that the mapkey records the name of the drawing used this time and it will repeat it next time we run the mapkey.So I replaced the line where the drawing name was with a nested mapkey that I will create next.2 - Now I need a mapkey to get the name of the active part. How?This can be done several ways, I preferred to save a dummy file just to get it. I created a mapkey to save a ".pic" file since we never use files of this type and it can be generated from parts and assemblies.Then added some old "dos command line" to get the name of the pic file, delete it and generate a text file with a mapkey with the line I deleted from the previous mapkey plus the captured filename.This will be the nested mapkey.3 - I need a thi
Greetings!Not sure how this works on this site. I guess I will find out.WayneF
Dear all, maybe you can help me with the following: i need a specific hatching pattern for glass-material which somewhat looks like the one in the attached picture.Can anyone help me out?thanks a lot
I recently became aware that PTC Technical committees have been replaced by PTC User Open Forum. The meeting is being held on Feb 7,8,9 at the Boston Park Plaza, Boston MA. I'm hoping that we, PTC customers can exchange opinions, notes and best practices at this forum..... I have registered for this event and wanted to remind others who may have missed the email from Dan Glenn..Registration cost - $400; Room rate: $129/nightSee you there!!!
①技术层区别:参考文档:参考方文档和物料的关系(Version To Released Master Document)物料关联特定版本的参考文档若物料和文档关系更改,则物料始终关联最新已发布的参考文档 说明方文档:说明方文档和部件的关系(Version To Version)若 物料和说明文档一起修订更改,则修订版本物料关联修订版本文档,一起升版。若 只有物料单独修订升版,从文档上可以一直看到最新版本的修订部件,历史物料版本断开。 ②业务层应用:参考文档:物料只与已发布的文档关联。装配物料所使用的制造商手册。 部件经过多次变更|修订,物料始终关联最新版本制造商手册。在查找原始供应商不再提供的部件的替换品时,包含手册的文档非常有用。 请注意, B.1 为发布版本(已发布),但并非最新版本。 C.1 为最新版本(WIP),但尚未发布且仍有待更改和批准。在 C.1 升级为发布状态之前,查看物料相关文档的用户看到的是 B.1 版本的材料规范。说明方文档:版本之间的关联,文档的特定版本关联物料特定版本。变更时 物料和文档必须一起修订升版 ③HIK常见应用:参考文档:制造商手册和物料的关系,物料在修订/升级,但制造商/工艺/材质 不会变,最新已发布的才会对外共享。说明方文档:二维DRW绘图,丝印图用来说明相关物料,A版本的绘图说明A版本的部件;B版本的绘图说明B版本的部件,这样可以确保图纸和部件版本一致性。
My laptop was recently destroyed in an accident. I got a new one. Am I able to install mathcad on the new laptop without purchasing a new liscence?Thanks
Le presentazioni del PTC Forum Europe sono disponibili nella PTC Community alla pagina --> http://ptc.co/e6Zy30729zQLe registrazioni dei keynote speech e degli interventi nelle quattro principali Breakout Room sono disponibili previa registrazione
Unfortunately, I no longer work at PTC and will not be able to respond to any messages sent to this profile. If you'd like to contact me, my personal profile is Scott Morris linked to -.
A user of mine received the following message when attempting a check in:"EPM Document Master "body1.prt" is not unique. It is not even a good design. Even if I could check it in, I wouldn't. You have so many referential integrity violations that I stopped counting. Did I mention you are not even authorized for such a secured action? Go back to you model and build rules and stick them where the subsume links don't shine.Well, not really. We tried collecting funny error messages back in PDMLink 8.0. Our goal was to list them all and then provide Klingon to English translations for them (no offense to the Klingons in the room). In addition, it would help the users figure out how to fix the issue and /or work around it. I have a feeling that there is a master resource bundle that contains all of these. I am just not sure how best to organize it. I can post this in a wiki doc that we can all contribute to. Obviously, solutions depend upon the build code you are usin
I don't know how to solve this issue. The picture on the left is what I see in Pro/E and the one on the right is what I'm suppose to see.I'm using the decal feature to put an image of a sticker on the surface of a part. I works well until I do a save of after a couple of rotations. The image of my sticker become white triangles. Is anybody can help me with that issue.Thanks
How do I import a metric model and have it covert to inches automatically
Our team used several design principles and strategies to analyze the challenge, share ideas and decided on a design to work towards. After the new season challenge is released we begin the process of choosing the design to build towards. The main design process tool we use for this part is called a Q.F.D. or House of Quality. If you don't know what is means, check out the short videos on youtube for an explanation. We modify this Q.F.D. to work for our team. Let us explain how we do this.The first step we do is write down each part of this season's challenge and their point value. Then we look only at the challenges on the field(not how to accomplish them) and we rate each challenge. We decide if the challenge is a priority, with ratings of low, medium and high. Then we look at each challenge and rate it on how difficult it would be to do those challenges, ratings of low, medium high. And after looking only at the challenges, we narrow down the challenges to the ones we want to tackle
Hi All,My profile picture had been updated it will appear when the moderator approves it. Its a painting done by a lady I know. Its the picture of horses running thru a river/stream/lake/ocean.I apologize if you find my current profile picture a little different than could be expected in the PTC community. Painter I have an interest in from the 1800 to early 1900 time is Lawrence Alma-Tadema. You may find his pictures in Amazon.com or art shops online.I had not been in the community though I receive emails from PTC. I had on several occasions wanted to come in due to the interesting topics I saw in the emails. However my graduate certificate studies at the University of Idaho were very time consuming. I completed it in December 2015.I had uploaded a few files which I had worked on in 2016 these were uploaded in the electrical, mechanical and physics groups.
The text adjustment is set to the center (5) at the same time.DEFINE Txt_chg_position_boite LOCAL Cloture LOCAL P0 LOCAL P1 LOCAL P2 LOCAL P3 LOCAL Pt LOOP READ PNT "Select the text to move" Pt READ PNT "Select the lower left corner of the box" RUBBER_LINE Pt P1 READ PNT "Select the upper right corner of the box" RUBBER_BOX P1 P2 INQ_ENV 1 LET Cloture ( INQ 2) INQ_SELECTED_ELEM TEXTS PICK_VP_PNT Cloture Pt LET P0 ( INQ 101 ) CHANGE_TEXT_ADJUST 5 PICK_VP_PNT Cloture P0 LET P3 ((P1+P2)/2) MODIFY MOVE P0 P3 PICK_VP_PNT Cloture P0 END_LOOPEND_DEFINE
Time ago i have this issue; and i know that, i am not the only engineer with this problem of find new materials appearance database for creo ARX like others 3d software and don´t lose time preparing and creating new ones, so i just want to apply materials that´s it.Download, create, collaborate and share free materials appearance and enviroments for photorealistic render images; specially made for Creo CAD software, usefull on ARX(Advanced Rendering Extension) and PhotoRender.The community is also open for share any information related with Creo rendering, such as tutorials, HDRI images, textures, bumps, your renders, tips & tricks and news. Also Pro/ENGINEER old files would work.We would like to put this community here on Planet PTC, but we don´t have the feasibility for upload the amount of files and make a list of them (probaly there´s a way), so we must create this facebook page. maybe will bring new members trough facebook.This is the proposed .prt model for make material samp
So, in the middle of porting my PDMLink 9.1 customizations to my 10.2 server. One of those was a "hack" for the BOM reports drop down list. Basically, my report is a combination of MultiLevel BOM Report with Replacements but only a single level. That makes it a single level BOM report with replacements. In addition, I added a custom header and related documents table at the bottom. The great thing is that its printable.This is not it but what I am dealing with. This is NOT printable. You cannot have a scroll bar that cuts off some of the columns from the printed output. I will get to that later. For now, I just need to get the hook in, the link in the drop down list. I found the action and action model that controlled this, created my resource bundle, posted to the server and then...nothing. Checked for typos, fix them and ...nothing. Finally, I stumbled across an example in the Customizer's guide, page 1476, PSB Ribbon Customization. It comes with these warnings:You can ad
Hi all,today, I would like to draw your attention to the new, very powerful geometry search tool that we are working on for Creo 4.0.You can use this powerful Geometry Search tool to quickly find similar geometry or design objects as input for a simultaneous modification. You can create rules for searching geometry as described below:• Create a rule based on geometry or design-intent characteristics.• Derive rule parameters based on a seed selection.• Save or load rules for reuseExamples of rules are listed below:• Select all holes (concave cylinders) with diameter d > mm and d < 3mm• Select all rounds with radius r < 1mm• Find all geometric shapes.similar to a seed shapeIn particular, you will find it very useful to store the geometric search criteria as query into a feature as you can see in the attached video.This makes the tool in particular useful for defeaturing use cases (removing small rounds, removing small bosses, pockets) in preparation to CAE Analysis or 3D p
I wanted to see based on the presentation list how large the change was from traditional PTC products to the new IoT products. Its obvious based on my last posting that there is a shift underway but by how much? Did Windchill and Creo get relegated to the corner? Did the conference just grow larger? Let's look at some numbers.Note: These are some rough stats from the presentation list. I will admit that my numbers are not precise. I charted this from the conference presentation index. The 2016 list was helpful since it listed keywords for the presentation. The 2015 list was grouped by source in a traditional manner. Presentations may count twice if they bridge topics like ThingWorx and Windchill or Creo and Windchill. Total Presentations: LiveWorx 2015: 196LiveWorx 2016: 233Breakdown of presentation topics:Previously, Windchill/Creo dominated 2/3rds of the presentations, now are less than half. I also noted that there were 10 presentations that inclu
"Are you not the most wicked and ungrateful of reptiles? But for me you must either have given up your journey, or have been drowned in that stream, and what is my reward? If it had not been for the armour which God has given me, I should have been stung to death." "Blame me not," said the scorpion, in a supplicatory tone, "it is not my fault; it is that of my nature; it is a constitutional habit I have of stinging." - The Scorpion and the TortoiseIf you need explanation of the above, email me. Ok, we are on day 2 and I have had my fill of IoT. Don't get me wrong. I think this technology is the future, potentially very lucrative and as one of my old Wildfire customers quoted, "slicker than a wet nickel". PTC is smart to take advantage and jump into this growth space since it multiplies the value of the PLM data we've built for years. However, for my company in the defense space, I am not seeing direct applications. Pardon my lack of enthusiasm but I will still keep my eye on this. I do
This is a quick share to all, especially the folks in my training class yesterday, PTC Windchill 11.0 System Maintenance. The conversation was excellent and I hope to maintain connections with you all. We did not spend much class time learning purging but it was a discussion point. I wrote this a long time ago but it should still work in current versions. If you follow the standard rules that once something is released, you do not need to keep all the iterations the led up to the latest iteration. You would construct a purge query to clean these out. But how do you know which products to target first and what the expected results of your purges will be? This report looks at how much file space can be recovered by purging various products. I call this "bloat". You can execute this in TOAD or other SQL programs. My suggestion would be to run this first, do your purges, then run again to see difference. Don't forget to remove unreferenced files from vaults. E
It's been a while but I am finally back in the game. At Liveworx and actively pursuing an upgrade. We've rode this 9.1 horse for as long as it can go. You'll probably see a lot of me online looking for help and trying to get my old tricks to work in the new version. I need to catch up on the new features first. I must say, previous conferences shifted away from the main products to the new offerings. Previously it was Arbortext. Now its Thingworx and IoT. Don't get me wrong. I see the value in this new technology. I have not seen the value in my space which is A&D. It would be great to be the person figure out how to integrate this into our business. But when security trumps all, having our systems all connected together and streaming data all over the place is a recipe for a violent, machine takeover. Queue Arnold. No wait, he won't be back. You'll have to settle for me.Side note: Please tell me garbage day in Boston is only once a w
Dear All:This is not a technical answer or any sample code which will help you execute your code. This is my memoir of my learning protoolkit and expression of my rejoice of executing first successful project.I am a beginner learning to swim in the sea of protoolkit. I am a Mechnical Engineer and I developed interest in coding in holidays, only after completing my B. Tech. And to be honest, it got me, so I explored career in coding. I learnt C and C++. And joined a company where I was introduced to protoolkit. Initially, like all beginners, I faced difficulties learning protoolkit. Sometimes I got so fed up that thoughts of giving up started flowing in my mind. I had interest in Web and had learnt it in my holidays. So naturally my defence mechanism started influencing my cognitive abilities against learning protoolkit. It kept on pursuing my decision making ability to switch to web before it is too late. The sheer size of market of Web kept me calling all the time while learning proto
Vous avez déjà un compte d'utilisateur ? Connexion
Pas encore de compte d'utilisateur? Créer un compte
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.