<strong>Creo Parametric related:</strong> Expert Machinist, CMM, Molding, Casting, Additive, EMX topics, and more
Recently active
Is there a way to have one part used to create a casting and machining part?I thought Simplified Reps would do it, but it has been some time since I have done this.Thanks,Jim ShieldsDRS C3 and Aviation Co.Horsham, Pa. 19044This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Attached, you can find a ZIP with models demonstrating our approach for developing castings. It's a conceptual setup, not a practical example. It contains :- the assembly with the design intent and the finished casting- the manufacturing design intent- the rough casting.These models contain each a 'ReadMe' setup note, with additional explanation.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
NAIAD is an integrated engineering company based in Calgary, Alberta. Founded out of a passion for the art of engineering. NAIAD is about CAD, CAE, FEA, CFD, FSI, design, engineering, simulations, project management and software solutions from PTC and ANSYS. NAIAD corrals risks to turn them into profitability. Clients who choose to face reality rather than gamble on faith seek answers, not mere results. NAIAD secures their return on investment.The Position:The Machine Science Group of the Technical Services Division has an opening for a seasoned engineer to work on a variety of assignments anchored at Naiad’s core engineering activities: product development, machine design, system engineering and analytics. This is a “hardcore” engineering position requiring the incumbent to fully understand the physics of the problem, develop mathematical models, and engineer solutions from pertinent theoretical, analytical and applied tool simulations. Assignments arise from all four of NAIAD’s main
NAIAD is an integrated engineering company based in Calgary, Alberta. Founded out of a passion for the art of engineering. NAIAD is about CAD, CAE, FEA, CFD, FSI, design, engineering, simulations, project management and software solutions from PTC and ANSYS. NAIAD corrals risks to turn them into profitability. Clients who choose to face reality rather than gamble on faith seek answers, not mere results. NAIAD secures their return on investment.The Position:The Machine Science Group of the Technical Services Division has an opening for an engineer to take on a lead role in the management of design, engineering and analysis projects across all three of NAIAD’s sectors of interest (aerospace, manufacturing and energy), with a particular emphasis on oil and gas packaged equipment. The position reports to the Director of Engineering.The primary responsibilities of the position encompass the traditional definition of a project engineer, with the overall mandate of seeing projects through com
NAIAD is an integrated engineering company based in Calgary, Alberta. Founded out of a passion for the art of engineering. NAIAD is about CAD, CAE, FEA, CFD, FSI, design, engineering, simulations, project management and software solutions from PTC and ANSYS. NAIAD corrals risks to turn them into profitability. Clients who choose to face reality rather than gamble on faith seek answers, not mere results. NAIAD secures their return on investment.The Position:The Software Group Industrial Division has an opening for a demonstrably successful business development specialist in enterprise software solutions, to represent NAIAD’s complete line of solutions from PTC. Products will span PTC’s entire product development system family, with an initial focus on Creo Elements and Windchill. The individual will have overall responsibilities for creating new opportunities and manage existing PTC software accounts. The position is located in NAIAD’s head office in Calgary, Alberta, Canada and reports
All,I would like to know which type of tool path would allow the Z axis to advance as the tool profiles around the inside of a window. I am trying to get rid of tool retracts that happen for each depth of cut. Also I'm not sure which parameter would control the Z depth as the tool cuts around each window.Any help would be appreciated.Best Regards,LarryThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
I am running WF5 m060 on a Lenovo W510 Portable Workstation, which is a PTC certified machine. I am running Windows 7. It' s a new machine Dec 2010.My screen res is 1920 x 1080.I am having a font problem wherein the choices in some of my pull down menus are spaced out too much. This makes the menu longer than it otherwise would be. This is especially problematic for the EDIT menu, which has the most choices. It's so long that it extends well past my screen height. This means I have to scroll up and down to see all the menu choices within the EDIT menu.Has anyone seen this before and have a clue as to the problem?I have tried setting fonts_size to small, but all this does is shrink the fonts, but the extra large space between each menu item is maintained, so the menu doesn't actually get any shorter.I have the same screen res at my work desktop and have no issues with the menu item spacing.Questions:What font does Pro/E use natively? According to the help file it uses the font set up in
Okay Folks....here's the scoop. According to my good friend Iain lewis of PTC in the UK, Dynamic Sectioning is INDEED a reality in Creo (didn't ask if that includes WF5 early versions). I guess Iain may chime in on that one.The Dynamic Edit functionalty is the key driver behind Dynamic Sectioning in Creo. It'll work wherever you have the ability to show sections, ie part, assemblies, process, manufacturing, interchange, simp reps, family tables, etc etc etc. It will also work with both planer sections and offset sections.Glad for all the responses as well.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
i've been away from wf4 for a few years, been using wf2 at current employer....back then i had no problem(s), but it seems my memory is fading.i'm missing something.using nc asm, assembles ref model, created workpiece, worcell...1) i can't trim volume to ref_model2) when i redifine volume and add protrusion, mill sequence igmores added protrusion.thanksThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Hey Guys..When i create a process dokument for our millingmachines , i use the "&mfg.oper.ncseq.z_min" parameter.For 5ax milling i will like to output the "z_min" from the seq csys instead of the oper csys ?I´ve tried remove and replace "oper" but all whitout luck 😞 JesperThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
I am wondering what is the best technique for mirroring a toolpath with same cutting conditions. We machine alot of mirror parts that are too large to machine parent at the same time. We need to keep all cutting conditions the same. upcuts, climb cuts and also with surface milling. If we mirror the steps u cannot suppress parents. Is there a way around this?ThanksDaleThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Hi folks,I'd like to hear from you what you think about the removal of the CL Preview Window in WF5. We are deeply missing this functionality and I'd like to hear from other people in the same situation. IMHO PTC removed the programmer ground because now he has to back-and-forth all the timeto playpath the sequence in order to see the sintax of the CL file, to see if he placed the command in the right location.Thoughts?Daniel
Hello,I am interested to know how you and your colleagues approach the division oflabour between Design Engineers and Draughtsmen.If, for example, a Design Engineer models a part that has to fit into anassembly at a compound angle, he will model the part so that the compoundangle is included in the model somehow.Or it may be that a certain area of ashaft has to have aspecific hardness, whilst the remainder is not critical.Imagine, however, that the model is subsequently sent out to a sub-contractcompany for production of manufacturing drawings. Unless the draughtsmanspots the compound angle or special area in the model, or the DesignEngineer informs him, he is unlikely to know of its existence, especially ifhe has been given a collection of part models to draw, and not the top-levelassembly. The drawing is produced, showing only a simple angle feature, andwhen the part comes in, it will not fit properly, or it fits perfectly, butwears out too quickly.Clearly, it is essential for Engine
First, continuing to support outsourcing to a communist country that owns all of your debt, does all of your manufacturing, and is demanding access to all of your IP, is just plain dumb....and is not good strategically for our country. I'm not complaining about "outsourcing"....just stating a very serious problem with who we choose to outsource too. It's funny how we all complain about becoming a communist country here in the U.S.....but we have no issues at all sending all of our jobs and money to communists countries. I don't think I'm saying that I'm not "smart enough" to adapt to a global economy. I think I'm saying that I consciously choose NOT to have my products made by children or slaves in other countries in a work environment that doesn't have any safety regulations or for a company that doesn't care about the environment. I choose NOT to have a lead-paint toy from China placed under my tree (very difficult to accomplish). I do it because I care about the whole process, NOT j
Manufacturer of consumables for front end semiconductor process equipment, Austin TX area, needs CAD designer/draftsman for full time position. Pay range $40k - 50k annually, depending on experience, full paid benefits. Required: Pro E Wildfire 4.0 experiencehigh level assembly experience.Ability to create detailed high level assembly layouts Able to design/detail parts to produce accurate and complete manufacturing specifications. Self-starting, motivated, project management experience Semiconductor equipment experience a PLUS. No relocation assistance offered. Send resumes to: lianam@glemco.com (This is not a recruiter)This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable ab
Does anyone know if a post processor for a Hansuedt EDM, DS-2 exisits? This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Creo will provide the industry's only scalable suite of right-sized apps for everyone involved in bringing products to market. In this video, Michael M. Campbell, DVP Creo Product Development, demonstrates the creation of NC machining toolpaths in Creo. Creo offers a broad range of NC, mold, die and tooling design capabilities, unlocking manufacturing efficiency.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Good morning,I am slowly getting into more mold designs and realize that most of mycalculations for runners and gating size is passed down to me from pastexperience from more experience mold designers. Are there formulas that Ican use to figure out runners and gate size for parts that are easy tofigure? Or of any books that I can get that will help explain this moreeasily? I would really appreciate it.Thanks.Son Nguyen785-667-7763108 W. 2nd StreetAssaria, Kansas 67416This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
How do you create a helical curve on a cylinder? Doug KeunekeManufacturing EngineeringUnited Space AllianceKennedy Space Center, Fl321-867-2653 work321-501-0643 cell This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Hello all,PTC provides the source code for a utility called AutoAxis, but not the final compiled application that someone can actually use. This utility is extremely helpful when you are using the PRO/NC module. Can someone of you, share this AutoAxis compiled application?Thank you very much in advance.Regards,Vassilis AnagnostopoulosSPIDER SAIndustrial Area - Rodotopi45500 - IoanninaGreece
Does any one have a sine plate / sine vise fixture drawn up in Pro/E that they are willing to share? Any good web site that have manufacturing related fixtures?Thanks,Bill This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
We are in the process of looking at machine simulators to check our G code. We got demos from Vericut and NC Simul. I know Vericut pretty well, but I don't know NC Simul. Have you ever heard anything about NC Simul, or know anything about them?ThanksJim MradSynthes-This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
I'm new in this forum (I'm downloading PE3), and hear that there is no output possible from PE3 to any kind of CNC machine.That means:there is not direct control over CNC machines, orthere is no way to create any kind of file that I could send to a 3rd. party so he converts to his CNC machine and cut it for me? Some kind of standard file accepted by most CNC convertersThanksJoseThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
We are trying to use Mechanica sensitivity analysis to vary the wall thickness of a casting component. The problem we have is the casting was created in two steps, a cast model, then a seperate external merge model to add the machining features. The shell thickness for the casting is defined in the first, cast model. We've not been able to have Mechanica change the parameter defining the shell in the cast model when we have the machined model active. It seems like Mechanica can change the parameter, but the thickness never actually regenerates.So:1) Is there a way to "cut and paste" or somehow get all the machining features into the base casting model so the external merge isn't needed? That way, we could just do the sensitivty study on the cast version, but it would have all the machining in it.2) If that isn't possible, any ideas as to how to force Mechanica sensitivity to change the cast thickness even when the machined version is what is being analyzed?All input is welcome and appr
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.