<strong>Creo Parametric related:</strong> Expert Machinist, CMM, Molding, Casting, Additive, EMX topics, and more
Recently active
CREO 8.0.5.0. Parametic / Manufacturing / Material Removal SimulationWhen closing material removal simulation in manufacturing, CREO is crashing. In the past, I have chalked it up to be a large amount of sequences(Large programming file). But today, it has crashed more than a handful of times. And the program has only 7 sequences so it is on the smaller side. I tried to re-create the crash and not been able to do it. I have made a point to close the same way every time inside of the material removal simulation. Does anyone know what I am doing wrong? And how to fix it.
I want to top and bottom die split of the attached model through mold cavity features. please help me anyone
Hello,I try to customise my postprocessor configuration to make it better. At the beggining of each of my programs i have a line with multiple initialisation codes. I never really asked myself the question where they came from since I needed them.With tests i discover their origin. They come from the FIL EDITOR in LOADTL SectionDYM=POSTF(13) This option is responsible for :- Calling tool- Put the good offset- And the prep codes Can someone explain this witchcraft to me ? And how to modify the prepcodes ? Thanks in advance
Hello, I try to find a way to desactivate the spindle (or set it to 0) between two sequences with the same tool.Example between 2 engraving sequences at the end of the first, spindle Z return to a safe plan, rapid move to the second sketch and engrave but all with the spindle at the same speed. For the moment I tested with inserting CL data but i think it's not very clean and risky. Is there a more professional method ? Thanks in advance.
Any can help me regarding this case
This error shows up after assembling multiple rocker arm if you have any idea to solve this share that!!! Have a good day!!!... (I am using creo 5.0)
Creo Parametric 10.0.4.0Problem: With implemented auto assignment of material for new parts, Using the create workpiece option the material assigned does not have a density assigned. With company wide standard config option "mass_property_calculate automatic" a notification about Outdated Mass Properties is displayed and adds time to resolve.No option to define template when creating a new Workpiece in NC.No option to assign a Default density on newly created parts for workpiece.You can create Solid parts, assign density and reuse those part for workpiece using “Assemble Workpiece”. This is NOT a good solution takes longer to perform. Default material PTC_SYSTEM_MTRL_PROPS is not accessible to change. Article CS160794, incorrectly defined a way to use a template during creation. This only applies to Mold. This is very sad that this option has been available in Mold but not in NC for a very long time.
Hello sir , I need EMX 9 for my creo 3.0 I can't upgrade. But as I was searching online it is not available any where, so can you help me and send me link for EMX 9.0 Thanks AAkash Jain
I am using Creo Parametric Release 5.0 and Datecode5.0.5.0I am having an issue when I post my program using NC post processor (Glidemaster Lathe with Fanuc Control). I am able to post the file but the file is not imputing any decimal points in the program. I have looked under “File Formats” – “General Address Output” but am still not able to get the program to output with decimal points. Additionally, I only have the issue in my Lathe post processor.
In Creo 3 i can create a "Stock Model" to get the remaining material after a NC Sequence.How can i set it as Real stock for next sequences?For example: first sequence is a Volume Roughing with a tool dia 20mmI would like to create a new volume using the same mill window but limiting it to the remaining material of first sequenceI don't want to use Roughing and Re-Roughing 😄I cannot replace the starting workpiece with his worked component of the familytable inside NCI can save Stock Model as prt or stl, why i cannot use it for example for further operations?Thanks a lotOsvaldo
Hello, In Creo Manufacturing, I would like to use Auto-Drilling for counterbored screws. Does anyone have experience with how to input the hole dimension values into a Custom cycle, or alternatively, in which drilling cycle could I input these values from a table? Thank you in advance for your assistance.
Hi,recently bought the printer mentioned. today i'm working with the software provided by the printer manufacturer for the sake of adding support & slicing etc. As a next step I would like to print the model directly trough Creo ( 11 ). did any of you have an experience with that ? any specific tips or suggestion ? Many thanks,
Are there any experts in the CREO NC processing programming function???No matter how I look at it, I don't know the difference between WORKPIECE and MILL VOLUME, can anyone tell me???
I recently get into the world of CAM, and in my factory we acquired a 4 axis milling machine an double column machine, But i'm not really good designing post processor and i'm wondering if you have something similar with 4 axis and vertical Z Axis, Thank you.
I just went through the nightmare of discovering that I was calling for 2 thousand second dwells on countersink cycles. I thought the machine had quit, but that wasn't it. My controller expects P periods in seconds not milliseconds. I fussed my around G_post, found and fixed the variable and checked that it now works. My question is what to do with Creo residual installations from 7 to 10, each one containing gpost option files for my machines, some of which have been modified over the years.When I upgraded to 10, I copied the gpost files from Creo 9 into the same folder that they would have been in 10 and it looks very much like that is what Creo Manufacturing has been reading when I call for a work-center I have on file. I fixed the uncx01.p33 (the one in the Creo10 system files) which is the option file for my mill and I now get the 2 second dwells I was looking for I suppose I can move all of the older trees to another drive and Creo won't be able
I need to mill 32 identical objects from a sheet of aluminum. Operation includes drilling, countersinking, pocket milling and profiling of each part. I've got the first instance set up in manufacutring and now I want to copy it into a 4x8 array such that all of the holes will be drilled, then all the countersinking, then the pocketing andf finally the profiling. I'm sure I've done this, but cannot remember how.
Hi, I'm creating a mould of a lego minifigure for a school project. I created a silhouette curve to define the split line on the model but then when I tried to create a skirt surface it came up with a lot of errors because I don't think the silhouette curve has complete loops. Is there any simple way of fixing this? Maybe using a different operation to achieve the same result?
Working in Creo 10.0 is there anyway to save the draft analysis as a .stp file with the draft analysis colors on the part? I have tried a 3D PDF but have not had any luck.
Hi,I have SLM 3D printer of XACT Company. I want to connect with Creo. please let me know how i can connect with Creo. Xact Metal | 3D Printing Software
How do I remove the errors Tool parameter TOOL_ROUGH_SPINDLE_RPM (used in relation): value undefined. and Tool parameter TOOL_ROUGH_AXIAL_DEPTH (used in relation): value undefined. I already do the following...1. In the Tool Manager I add spindle speed and feed and radial and radial depth.2. In the parameters I remove any relations with these variables.
Hello, I am sorry if this has already been discussed. I have searched for this topic without success. I am interested in production processing wood components through a 3 axis router using Creo. It appears that the NC Sheetmetal option is intended to do this with metal components. Is there a similar option for wood parts? How are furniture companies who use Creo handling production cnc wood components? Thank you,Barry
I am using Creo Parametric Release 5.0 and Datecode5.0.6.0We have tool design extension in Creo. While using Mold machining, we are facing regeneration issues. for example, if we add or remove any features in source file and if we regenerate in mold machining the extract id fails. if we change the source file to its original form and if we regenerate again in mold machining the regeneration error remains the same.Here are the errors that I facedextract id failure, regeneration issues
Hi there. I would like to export a CL file of a part from Creo Manufacturing and to then post-process it to G-Code to mill on our ProtoTrak DPM2 3-axis CNC machine (with SMX controller). The roadblock is that I don't have a post-processor for the ProtoTrak DPM2 CNC machine, so I was hoping someone could direct me through the setup process in a few bulleted points. The end goal is to be able to mill some parts with complex surfaces with our ProtoTrak CNC machine. The ProtoTrak company website states that it is the CAM software's (in this case Creo) responsibility to post process the CL to understandable G-code for their machine, which they say takes the same G-Code instruction set as a Fanuc 6 CNC machine. I also have the accepted G Codes in a manual for the specific machine open on my computer, in case anyone asks, which I will upload as a screenshot. I am using Creo Parametric version 8.0.8.0
Hello, I am trying to doo a preparation for print in Creo, but the build envelop of the PTC generic printer is an opaque blue. is it possible to make it transparent so I see the part inside it?
I am using Creo Parametric Release 4.0 and DatecodeM150HelloI am using the relation RAW_MATERIAL_WEIGHT=PRO_MP_MASS:2 in my manufacturing .asm to show in 2D drawing of my Manufacturing Setup sheet the Weight. The number :2 refers to the ID of my Raw model. But when I save a copy Drawing / .asm and replace the model of raw material the parameter PRO_MP_MASS:2 doesn't update and in my drawing, the parameter keeps with the weight of the previous one. Do you have any suggestions to solve this problem?Here are the errors that I facedHelloI am using the relation RAW_MATERIAL_WEIGHT=PRO_MP_MASS:2 in my manufacturing .asm to show in 2D drawing of my Manufacturing Setup sheet the Weight. The number :2 refers to the ID of my Raw model. But when I save a copy Drawing / .asm and replace the model of raw material the parameter PRO_MP_MASS:2 doesn't update and in my drawing, the parameter keeps with the weight of the previous one. Do you have any suggestions to solve this problem?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.