<strong>Creo Parametric related:</strong> Expert Machinist, CMM, Molding, Casting, Additive, EMX topics, and more
Recently active
We are updating to Creo2 next week and I was wondering if any admins have had luck installing the software from the network rather than storing a copy of the software on each machine?Thanks,Take care,JEREMY HANDLERMechanical Engineer1+760-591-7318Jeremy.handler@hunterindustries.com[Description: cid:024EB480-3C46-43E4-9814-8F315F22E2FA]1940 Diamond StreetSan Marcos, CA 92708 USAHunterindustries.com[Description: Grren] Consider the environment. Consider the impacts.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Just switched to Creo1 M050. Running under windchill 9.1 M060. When posting a file using Gpost it is puting the tap file into the workspace instead of the directory specified by pro_mf_cl_dir. Any help would be appreciated.Craig BroetzmannStrattec Security Corporationcbroetzm@strattec.comThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Hello guys could someone tell me is there a way for the cutter to plunge in a helical way in trajectory miliing at a specified radius instead of plunging at 90degrees or ramping.thanks for any help michaelThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Hi,Is is possible to modify the generated tool path for any kind of sequence, like to eliminate some portion of generated tool path.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
hello guysive got to machine a chamfer on the back of a 25mm hole using a 16mm dia dovetail cutter,ive tried using trajectory milling but the cutter just comes down through the component,how do i get the cutter to come down in the centre of the hole then machine round the back of the hole.thanks for any helpThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
I currently have 2 operation built. I have 2 seperate workcells with tools. If I edit a tool in one workcell the same tool number in the other workcell changes also. Is there a way to make these independent from each other?Thanks,Rich
Has anyone else had trouble with the 4+GB file size of the latest installfiles?I find that I have to download the file from the web onto the individualsmachine, I cannot copy the file across the network or from a thumb drive.Inevitably the zip gets corrupted.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Hi I am Engineer working with CREO 2.0, and I have this problem with Roughing Seq when I use STEPDEPTH_ADJUST and ROUGHT_SCALLOP_CONTROL simultaneously, why the depth of the tool is so deep and I dont have any control to change the value.Thanks
Does anyone have a post for a Fanuc 31i control on an OKK machine?This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Hello, everyone!Does anybody know how to create a pattern around the axis in the sheet metal module of Creo Parametric?I would like to create a pattern of teeth of a bead mill blade but the option which is called "around the axis" is not available (it's grey).Thanks in advance.Best Regards, Vladimir.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
My company has just recently started using solid models to create machining programs in GibbsCAM. We are experiencing issues with radii where there are more points in the radius than the standard 3 points (start, midpoint, end). Has anyone else had this issue and if so have you found a solution.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Been looking at upgrading to a new station. Moving to Creo 2.0, will be using Windows 7, looking at Dell or an HP machine.Anyone already been through this, and have any recomendations?Thanks!DavidThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
We have a new 5 axis machine in the model shop. The staff is interested in a demo part that shows what the machine can do. Does anyone have a suitable PRT model that you could provide. Thanks in advance.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
I believe you can do this in pro casting but we don't have that. Does anybody know of a way to shrink an entire model. We have some models that we are having molds made for. I have been asked to shrink a whole model 1%.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Hello,Maybe someone can take the mystery out of this for me. When we changed over to WF5 the program filenow post like ######_xp##.. The _xp## is the post that the ncl code was processed through.The mystery? PTC has no fix for this, post experts tell me they have never seen this yet in any otherclients with WF5. I know it is documented by PTC. We post out a .tap file that we run through a utilityprogram which opens the file in an editor (predator). This function no long opens the file.Is there any way of preventing ProNC from posting the file with post extension?ThanksThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
In Pro-toolmaker, they have the concept of 'sister tools' to denote identical tools than can be swapped in/out after a certain amount of cutting time for die/mold work.Has anyone been able to find a way to at least add M01 (opp stop) in a rougning or finishing sequence after a specific amount of cuttting time or distance in Pro/NC sequences?At least with the M01, I can let the machinist know that the inserts need to be flipped, etc...Is this possible in Vericut? Opti-path maybe? (Full version, not the NC check in Pro-Man)TIA, (Thanks in Advance), Christopher GosnellTRIGON INC.FPD Company124 Hidden Valley RoadMcMurray, PA 15317PH: 724.941.5540FX: 724.941.8322www.fpdinc.com -------------------------------------------------------------------This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question.
My client designs capital equipment for the semiconductor industry. Experience with product development, design, test and manufacturing using sheet metal, aluminum, cold rolled steel. Design mechanism, fixtures and mechanical components. Interface with customers to take requirements. System design from concept through detailing and release for production. CAD models using ProEngineer and SolidWorks. Generate assembly drawings and Bills of Material from assembly models. Prepare layouts/models based on design specifications and create detailed drawings of parts based on the layout/model. Calculate and verify that the design meets the specifications. Design to cost goals and design for manufacturability and testability. Interact with manufacturing to improve processes. The position starts at $80K, however, my client is willing to go as high as 95K and even high if experience can justify. This position also has a relocation incentive as well being that my client is located in Chandler, AZ.
Hello Everyone,I have prepared a spreadhseet contains over all process flow for creating Electrical Harness Drawings. Please correct me if something missing out...This process flow contains Four major modules...1) Wiring diagram in Creo Schematic2) Cabling in WF53) Manufacturing4) Drawingplease find the attachment for your Reference.-GGAttachments:This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
My Monday moring rant!!I have been playing with the roughing and finishing of pocket with mill windowsin Creo2.0 for a couple of hours today. Not really impressed with the floor finish routine or what is called shallow cut in the finish. When I finish a pocket I finish the floor then the wall with a spring pass or two. With the floor finish it seems you can't have just wall stock when you include finish stock it puts it on the floor as well, Then you have to do an axis Shift to get the floor down to where it should be. I don't care to use axis shift any where because it's too easy to make a mistake by deciding to change the finish stock by making it less then not change the axis shift. You then have a nice deep pocket. Also if you have a pocket with holes the routine with stock seems to try and save time by not machining around or over the holes which is fine if they are large diameter but when they are screw holes in the corners it just makes retracts and plunges all over the place. I
Can someone help with a drilling issue if you have time? I attached a file containing the result of what i want to drill. Problem is that not all the holes are drillable without to much manual labor. I was thinking someone might know a way to convert the holes that aren't recongized by the software as holes or maybe have a way to convert them to holes so that the software can read them. I know some other CAM softwares will convert. I hope someone can help otherwise i may need to look at different softwares which i'd rather not do. Hope this makes sence, just want to see waht you guys think based on the actual model.Jeff
I just wanted to start a discussion to keep the forum talking. But anyway I have been using pro nc for a couple of years now I think it was wildfire 3 when I started. I used to use mastercam before my company switched to pro e. I was just wondering what some of the other users that have used other software thought pro nc matched up to them. I have been to some tool shows and talked to other cam vendors when they ask you what your running and I tell them pro nc there like I am sorry to here that. But I have watched some demo's from competitors and it all seems sugar coated. I will ask them if I can try and run the software and they will not let you.
hello everyoneSometimes when programming i insert a programme stop during an operation so i could remove clamps etc, thing is in the nc code i want to insert a note saying the reason why ive stopped the programme to help the operator (remove clamps). Do i have to manually insert the note in the nc code or is there a way the note is inserted when posting the programme, where woul i write the text.Would like it so that everytime the programme is posted the note would always be there. hope ive explained it ok. I am using creo 2.0thanks for any help
Creo elements/pro 5.0 datecode 130Windchill PDMLink 10 datecode M030Have had this happen on my machine and a few other users although the issue is not very repeatable. When going from a drawing to a shaded model the model disappears. The model tree is there, everything else looks fine. If you click on features in the model tree the features highlight where the model should be. The only way we can get the model to reappear is to switch to wire frame and then back to shaded.I found Document - CS57726 and SPR Details – 2131842 (linked together) on the PTC knowledge database but no resolution. This is a new issue with our recent upgrades (to PDMLink 10 and the newest Wildfire 5/Creo).We have tried different drivers for the graphics cards to no avail.Any ideas?Thanks in advanceAdamThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start
wildfire 4.0Using master model technique to create parts that interface with each other. After these 2 parts have been created, how does one go about adding tolerancing/gaps for manufacturing/assembly purposes?This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Hello, I have a model with a large number of coordinate systems that I use for reference. Our software people need the x,y,z locations of each of these points in relation to a central origin. We use a cmm to measure each of these locations for accuracy calculations. I currently do this manually using the distance tool, but there has to be a better way. I was hoping to write a macro or something like this. Any suggestions on a better way of doing this? Thank you in advance, Josh This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.