<strong>Creo Parametric related:</strong> Expert Machinist, CMM, Molding, Casting, Additive, EMX topics, and more
Recently active
can anyone explain how to create option file in creo2.0?
how to install CIMPRO and FIL in creo how to get started with gpost ? clearly define me what is cimpro and fil??This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Hi all,I have been working on some heavy engineering problems and need some good reference to try out load analysis softwares and tutorials.From what I have learnt so far, dynamic analysis of load is not feasible due to the random nature of real world environments so the best we can do is try to model a static load which is 4 times the maximum possible load applicable to a machine. But there is no data on how and where to apply loads and constraints. I request some guidance on how to approach this subject as there is very little data available in the forums (or I have been searching wrong).Thanks in advance.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version
Good morning everybody,I have a question about the managing of 3D models. We are a plastic industry company and we make our molds.When we make a mold, we have a 3D model of plastic article in CREO, then We apply a Shrinkage and have parts of mold. Then manufacture all the mold parts, assemble and test until desired plastic parts. Often the obtained plastic parts in the injection process does not coincide with the plastic article drawing but these plastic parts are good for our customers. In this moment, We edit manually the dimensions in the drawing and then our customer approve this specification drawing.The problem is that the plastic article 3D model does not coincide with the drawing dimensions. Could you know about the best practice to manage this situation?We think that our current practice is not good because We are losing the system (CREO)association and is difficult to manage the changes, We have problems for human carelessness.We appreciate a lot your help.Have a nice day.Thi
Good morning, I am trying to figure out which to go with for my department. I wentto IMTS last week and was set on going with Vericut after I got back fromthe show. At the show I saw the NCSimul software and was blown away at thespeed and all the neat features that was in that package. Example if thereis a collision in the program I can click on the collision in the graphicswindow and the section of the program will also be highlighted. I was reallyimpressed with how you can rotate the model while it is still cutting andnot have to wait for it to regen like in Vericut. The presentation from theNCSimul was really informative compared to the Vericut booth. When I wentover to the Vericut booth to ask for information on their software, all Igot out of them was that NCSimul was running another developers source code,the verification is calculated and lack of support.Currently we are using the embedded light version of Vericut inside ofProMAN and I was planning to upgrade to the full version
Anyone out there using software to control the release and distribution of CNC files to the machines? Specifically, I am looking for companies that need to maintain history, and release control such as FDA, DOD, FCC or other requirements. An example of this type of software is ForCAM.If you use software like this could you answer the following:Why did you select this software?Are you using Windchill with it? If so, how does it work?What do you like best about this software?What do you like least?Would you recommend other companies buy this software?Thanks, in advance, for the time and feedback.Regards,Michael BraatenSenior PLM/CAX Systems Analyst - Synthes, Inc.
I have searched several forums and cannot find an answer to this. This question is specific to a PART, not an assembly. Is there a way to calculate the mass properties of a part for a given simplified representation? I need this information when making a drawing package for an assembly - certain features (holes, finished surfaces) are not represented in the part or weldment drawing, but are later shown in the final machining drawing. I do not think family tables are a good fit here as this does not change the overall part or assembly of parts in the model, I just need to show representations of the parts at different stages in the manufacturing process and their associated weights. I have seen two config options for this, force_new_assem_mp_in_simp_rep and mass_property_calculate but this seems to only reflect assemblies, not individual parts or part drawings. Any suggestions? Thanks, ScottThis thread is inactive and closed by the PTC Community Management Team. If you would like
Modelingのユーティリティグループ > Anno作成で作成した寸法や、 Mold Design>モールド集合体>プラスチック集合体で作成したモデルの寸法や、 PartLibraryのパラメトリックパーツに登録してある寸法を、モデルに属性として付加させたい。 例えば、ギヤなどの諸元表がある部品。This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
We recently updated from Creo 2.0 to 3.0 F000. Now I cannot locate the custom trajectory toolpath. I can fake it using a regular 3-axis trajectory, but custom trajectory did a better job of integrating the sketch into the step. It would be nice to have back. Does anyone know how I can find it?This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
PTC's new option for the 3 axis trajectory Helical Cut tool motion will not create a desirable tool path when the parameter OVERTRAVEL_DISTANCE value is greater than ZERO. If that value is set the tool motion zig zags or appears to be a spiral motion. This issue has been reported to PTC support.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
I have a volume with an angled top. I have set the angled surface to be the "top surface" in the toolpath settings. When I try to run a volume rough on it, the tool drops down until it fits all the way into the volume, putting it around a half inch deep on the one side. Looking around through the Creo 3.0 help documents online, I believe that the manufacturing parameter fix_skipped_slices is what I need to use to fix that. Problem being I can't find that parameter. Would somebody be able to guide me to it? Or even just verify it actually exists in 3.0?Or suggest another method to rough this volume without making it flat-topped and taking mulitple air passes on one side of the volume?This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC produc
Is it only IE and Mozilla that will work with Creo or can you use Chrome. What versions of IE work? My new install of OS has IE V11. I got new hard drive in my machine and now I can not see whindchill in my browser after I start up. I can register the server, and login but my status line at the bottom says that an install of Product View express was started and nothing happens in the browser window. I get a rotating pin wheel and that is all. Any Ideas?Ron RichMechanical EngineerKeithley A Tektronix Company28775 Aurora RdSolon, OH 44139440-498-2842This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Wow,Quite a Different Look to the icons and the new trajectory is nice and clean looking. I like it so far. I am Just looking right now probably won't start using untill after they get all the mold stuff running this fall or winter.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
I almost have a die complete in Pro Mold.I only have one problem, and that is that I can’t seem to move the imported solid objects which is important.In our industry we have to mismatch the top die impressions independent of the bottom die impressions.If I do a copy and move of the solid component for the top die it attempts to keep both of the solids. I can’t remove the original solid by hiding it. I can’t delete the original solid without unhinging the die model.I just need to offset the top impressions and get rid of their original location in the top die.Would you have an idea of how I could accomplish this?It appears that you are stuck with the original position that you import the reference model. If there isn't a work around for this problem which should be simple I'm afraid ProMold is going to be worthless to us. There must be some way around this.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this threa
We've only really used Project for sharing a copies of files with end consumers. For example the manufacturing shops.We are now looking at using it for a more collaborative process.We have two classes of users.A. Those that have access and modification permissions to files in the ProductB. Those that only have access to a ProjectUser A will share files to a Project from a Product. That user B will use to develop other files. Typically they would not have modification ability to the files shared from the Product.When these additional files are done and we want to manage them in the Product, they get Sent to PDM.Now the question come up when user B wants to make a change to that object how to we give them permissions to do that without giving them permissions to the Product.David HaighPhone: 925-424-3931Fax: 925-423-7496Lawrence Livermore National Lab7000 East Ave, L-362Livermore, CA 94550This thread is inactive and closed by the PTC Community Management Team. If you would like to provid
Here are some additional commands to gather system information.I have some of this in a script, I need to get it all in there so I can capture a line of data on each machine.=========Get the CPU=========C:\Users\haigh1>wmic cpu get nameNameIntel(R) Core(TM) i7-2720QM CPU @ 2.20GHzFOR /F "tokens=2 delims==" %%A IN ('WMIC cpu GET Name /VALUE ^| FIND /I "Name=") DO SET machinecpu=%%AThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
I have a user that would like to have a parameter on the manufacturing drawings they send out to the shops that lists the version and maintenance build of Creo that was used to create the file.We've been hard coding that information on our formats and ignoring the maintenance build.I'm not sure there is a parameter for this, but I told him I'd ask.Any ideas?David HaighPhone: 925-424-3931Fax: 925-423-7496Lawrence Livermore National Lab7000 East Ave, L-362Livermore, CA 94550This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Good morning, I am on Creo 2 M110 and notice that when defining drilling sequencethat these big red arrows show the direction of the path but they hide thedepth path. Is there an option to turn off the red arrows. They are moreannoying than helpful.Thanks.Son Nguyen108 w. 2nd StreetAssaria, KS. 67416(785) 667-7763 ext. 3477This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Hello all,how do you do for have a machining time who is close to the reality?thanks for your help or remark,ThomasThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
I want to create a groove on a cylinder as shown in the image. I create the groove path and wrapped on the cylinderI am using sweep to create the groove, if i select normal to trajectory the sweep cut is created on cylinder. but for manufacturing i want to create the cut normal to center axis.if i choose normal to projection and select ctr axis sweep feature failing. It will be helpful if anybody can suggest a solution.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Thanks everyone for the replies. I need to clarify further.We have existing Parts with Structure and existing CAD with a differentstructure. Not pretty, but it's our starting point.We want to as much as possible link the CAD to their respective Parts inorder to get the Representations. We DO NOT want the CAD to drive the Partstructure or change it. Curious if anyone has tried using any of therelationship types beyond "Owner". And if so what your experiences with ithave been.Thanks again!MargiMargi KorchInformation TechnologyMechanical and Manufacturing Engineering SolutionsMissile SystemsRaytheon Company+1 520.545.6097 (office)+1 520.203.4444 (cell)-6221 S Palo Verde RdTucson, AZ 85706-5093 USAwww.raytheon.comRaytheon SustainabilityThis message contains information that may be confidential and privileged.Unless you are the addressee (or authorized to receive mail for theaddressee), you should not use, copy or disclose to anyone this message orany information contained in this message.
I'm trying to model similar indentions on the side of a part using surfaces but it is not going to well. I came somewhat close to what I wanted a few times but I'm never able to put rounds on the indention I create. And at this point I would be happy just to be able to take the model I have and put rounds on it so that it can be machined with a 3/16 ball end mill(minimum 3/32 rads)Any help or pointing me in the right direction would be greatly appreciated.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Just curious if anyone would be willing to share experiences on linking CADdata to existing WT Part structure?Thanks in advance!!Margi KorchInformation TechnologyMechanical and Manufacturing Engineering SolutionsMissile SystemsRaytheon Company+1 520.545.6097 (office)+1 520.203.4444 (cell)-6221 S Palo Verde RdTucson, AZ 85706-5093 USAwww.raytheon.comRaytheon SustainabilityThis message contains information that may be confidential and privileged.Unless you are the addressee (or authorized to receive mail for theaddressee), you should not use, copy or disclose to anyone this message orany information contained in this message. If you have received thismessage in error, please so advise the sender by reply e-mail and deletethis message. Thank you for your cooperation.This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" butt
Is anyone doing anything advanced to help compute toolpaths faster? I have a hot job and naturally its one of the most complex parts I've done. I am doing a Local Milling routine referencing a previous sequence and it takes a long time to generate the toolpath. (Over an hour) Theres no easy way to break it up into smaller segments either. Although I may have to try. Is anyone doing distributed computing or something that i may not know about? Its also annoying that I have 1 CPU maxed out and 7 others just hanging out doing nothing. (I know CREO does not multi thread yet but its frustrating).I am running CREO 2 and my workstation is:Windows 7 64-bitIntel Core i7 CPU @ 3.80GHz32 GB DDR3 RamNvidia Quadro 5000This thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what ve
Looking at a case solution I discovered there should be a new volume mill sequence in creo 3. That's a good news =>https://www.ptc.com/appserver/cs/view/case_solution.jsp?n=CS172911&lang=enThis thread is inactive and closed by the PTC Community Management Team. If you would like to provide a reply and re-open this thread, please notify the moderator and reference the thread. You may also use "Start a topic" button to ask a new question. Please be sure to include what version of the PTC product you are using so another community member knowledgeable about your version may be able to assist.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.